- Xencor, Inc. v. Merus N.V.InstitutedPTAB · Sep 26, 2025 · IPR2025-00604 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1, 2, 7–24, 26–28, and 30–32 on all four grounds, finding a reasonable likelihood that at least one challenged claim is unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute trial in an inter partes review. We may institute an inter partes review if the information presented in the petition filed under 35 U.S.C. § 311, and any preliminary response filed under § 313, shows that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314. After reviewing the parties’ submissions in view of the existing record, we conclude that Petitioner demonstrates a reasonable likelihood it would prevail in showing that at least one challenged claim of the ’286 patent is unpatentable under the presented grounds. See Pet. Therefore, we grant institution of inter partes review. Our reasoning is discussed below. A.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A POSA at the time of the alleged invention would have at least an advanced degree (e.g., a Master’s or Ph.D.) in biochemistry, process chemistry, protein chemistry, chemical engineering, molecular and structural biology, biochemical engineering, or similar disciplines; several years of post-graduate training or related experience (including industry experience) in one or more of these areas; and two or more years of experience in the production of bispecific antibodies. (EX1002, ¶¶16-17.) Pet. 15. Patent Owner states, “[f]or purposes of the Preliminary Response, Patent Owner applies Petitioner’s proposed definition of a POSA.” Prelim. Resp. 10. At this point, we accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the level of skill in the art reflected in the prior art of record and the ’286 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). C.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningNo construction neededDecided for petitioner
“The ’286 patent uses the term “heavy chain” or “heavy chains” repeatedly; however, we find no express definition of the term. See generally Ex. 1001. Rather, the ’286 patent uses the term “heavy chain” in relation to antibody structure in a way that suggests the term is standard and well known in the art. See, e.g., id. at 3:19–59 (Background). The parties’ briefing on the technology reinforces this fact. See Pet. 5–14 (“The basic structure of natural IgG comprises four protein chains—two identical heavy chains (shown in red) and two identical light chains (shown in blue)—which are arranged in a Y-shaped configuration: . . . (EX1013, 112-13; EX1002, ¶¶23-30.)”); Prelim. Resp. 3–4 (“Natural or wild type Igs have a particular structure made of two identical light (L) chains and two identical heavy (H) chains. See EX2008 at ¶ 23. Each Ig heavy chain consists of three constant domains (CH1, CH2, and CH3) and one variable domain (VH), which is also isotypes, or a functional derivative and/or fragment of these. In a preferred embodiment, Ig-like molecules are produced that are antibodies of the IgG isotype because IgG antibodies e.g. have a longer half life as compared to antibodies of other isotypes. Ex. 1001, 11:9–21. As noted above (see supra Section I.C), IgG antibodies’ heavy chains have three constant domains, but IgE and IgM have four. Thus, Patent Owner’s argument that heavy chain means one variable and three constant domains, and two differently-binding Fab arms, ignores embodiments of the invention. consistent with the definition of heavy chain in the ’286 Patent. See EX2008 at ¶ 24; EX1001 at 11:58–66.”). This is also how the ’286 patent generally uses the term. See Ex. 1001, 11:58–12:1. But, the Specification does not limit its embodiments to only IgG antibodies because it also describes that the invention may be “IgG1, IgG2, IgG3, IgG4, IgA, IgE, and IgM” type antibodies, and fragments. Ex. 1001, 11:9–21; see also supra n.10 (quoting the ’286 patent’s definition of antibody). Other embodiments would not necessarily have the heavy chains as argued by Patent Owner. There is no evidence of record that the ’286 patent’s claims or the Specification generally use or limit the term “heavy chains” (or “heavy chain”) in any way deviating from its ordinary and customary meaning in the art. Therefore, at this stage of the proceeding, we decline to expressly interpret this claim language. 2. Summary on Claim Construction At this stage of the proceeding, we expressly construe no claim terms and give each claim term the ordinary and customary meaning it would have had to the person of ordinary skill in the art as of the invention date. See Nidec Motor Corp., 868 F.3d at 1017. If either party intends to further argue claim construction at trial, they should do so in a clearly designated section of their briefing so as to expressly identify such arguments. See, e.g., 37 C.F.R. § 42.104(b)(3) (content of petition); see also Board’s Consolidated Trial Practice Guide (CTPG) at 46, 48–45 (Nov. 2019).12 Claim construction arguments should not be relegated to patentability arguments on the facts.” slip op. at 16
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“In brief summary, these limitations require one CH3 heavy chain to have a positive amino acid substituted in place of a neutral one, the other CH3 heavy chain to have a negative amino acid substituted in place of a neutral one, and that when the heavy chains are expressed by culturing the host cell these positive and negative amino acids interact and the antibody produced is a heterodimeric antibody. Petitioner asserts that Lazar expressly teaches engineering two CH3 domains so that, when expressed, they interact and form a heterodimeric CH3 interface by making neutral-to-positive and neutral-to-negative amino acid substitutions at known interacting residues on each CH3 domain, e.g., S364E (changing neutral serine to negative glutamic acid at residue 364) on one CH3 domain, and L368K (changing neutral leucine to positive lysine at residue 368) on the other CH3 domain; or T366D (swapping neutral threonine for negative aspartic acid at residue 366) on one CH3 domain and L351K (swapping neutral leucine for positive lysine at residue 351) on the other CH3 domain; that these residues were known in the art to be respective interfacing contact residues; that these modifications favor Fc heterodimerization; and that they result in a heterodimeric antibody (proof-of-concept shown by synthesizing and screening). Pet. 23–28 (citing Ex. 1001, 13:1–17, 17:67–18:3, 19:5–12; Ex. 1002 ¶¶ 111–119; Ex. 1004 ¶¶ 121, 183, 241 (Tables 1, 2); Ex. 1007, 8:9–10, 17:19–20 (Table 1); Ex. 1008, 244–36).” slip op. at 29
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 9,358,286 - Mastercard Incorporated / Mastercard International Incorporated v. Ov Loop, Inc.All claims unpatentablePTAB · Aug 7, 2025 · IPR2023-01289 · APJ James A Tartal · IPR · Remand
On remand, the Board maintained that claims 1–33 are unpatentable as obvious over Collinge, including claims 10–13 and 27–30.
RulingsRemand decision- RemandDecided for petitioner
“Decision which components of Collinge “the Board relied on for claim 10’s limitation ‘receiving [at the remote computer system] an authorization request to authorize the transaction from the POS terminal.’” Remand Order 3. The Order instructs: “[o]n remand, the Board shall consider Patent Owner’s arguments as to claims 10 and 27, and their dependent claims. Regardless of the Board’s disposition on remand, the Board should address Patent Owner’s arguments and explain more fully its findings as to claims 10 and 27.” Id. The Remand Order further states that “this case is remanded to the Board for consideration of the arguments made in Patent Owner’s DR Request” and that we “should point more specifically to where in Collinge the argued limitation is taught, if anywhere, and which components of Collinge satisfy the limitation, if any.” Id. As instructed, in this Decision we consider Patent Owner’s arguments raised in the DR Request as to claims 10 and 27, and their dependent claims.3 As explained in detail below, and consistent with our determination in the Final Written Decision, we conclude Petitioner establishes by 3 We consider the arguments presented in Patent Owner’s DR Request in the context of arguments presented in Patent Owner’s Response, as arguments on the merits may be considered waived unless presented in that Response. See Paper 16, 9 (explaining that “Patent Owner is cautioned that any arguments not raised in the response may be deemed waived”). a preponderance of the evidence that the subject matter of claims 10–13 and 27–30 of the ’171 patent would have been obvious over Collinge.4” slip op. at 3
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Ex. 1011 ¶ 77. In short, although paragraph 77 of Collinge is cited in the Petition and addresses both issuer processing server 308 and acquirer processing server 312, Petitioner relies on and shows that issuer processing server 308 (not acquirer processing server 312) receives “an authorization request to authorize the transaction from the POS terminal,” as required by claim 10. Pet. 58–59; Pet. Reply 16–18; DR Req. Opp. 2–4. Furthermore, there is no dispute that in Collinge the “authorization process” is performed at issuer processing server 308 in response to a request it receives. Ex. 1011 ¶ 77 (“The issuer processing server 308 may then validate the application cryptogram”). Claim 10 requires “performing an authorization process” including “receiving an authorization request to authorize the transaction from the POS terminal” at the remote computer system. We recognize that acquirer processing server 312 facilitates receiving transaction information from the POS terminal and communicating an authorization request to the issuer processing server 308. See Ex. 1011 ¶ 77. It is merchant point-of-sale terminal 120, however, that transmits “the received payment information and any additional transaction information (e.g., transaction amount, merchant identifier, etc.) to the acquirer processing server 312,” so that “acquirer processing server 312 may then generate and submit an authorization request for the financial transaction” through payment network 124 to issuer processing server 308 for validation. Id. Thus, Petitioner shows that in Collinge the request received by the issuer processing server 308 is “from” the POS terminal, as required by claim 10. See Pet. 58–6-; Ex. 1011, ¶ 77, Fig. 7.” slip op. at 20
- Expert testimonyPetitioner expert creditedDecided for petitioner
“’095 Provisional, reproduced above). Reply 17–18 (citing Ex. 1009 ¶ 46, Fig. 7). We credit Dr. Fiske in this regard, who explains that “the functionality performed” in the components in the “Blue-Box Structures,” that is Collinge’s Cloud Systema and Issuer System, “share a ‘connection 178’ therebetween,” as shown in Figure 7 of the ’095 Provisional. Ex. 1050 ¶ 43. We also considered Dr. Easttom’s opinion that Collinge’s Cloud System 110 and Issuer System 108 (see Ex. 1011, Fig. 7) are not one computer system because, in his view, each item “is (one or more) separate systems that operated independently from the others.” Ex. 2009 ¶ 150; see also PO Resp. 36–37 (arguing that Petitioner presents “no evidence” to show that allegedly “distinct” components are part of one remote computer system). We find Dr. Easttom’s opinion untenable because it is contrary to the express disclosure of Collinge, which demonstrates that, rather than operating “independently,” Cloud System 110 and Issuer System 108, and specifically remote-SE system 110 and issuer processing server 308, are connected and operate together through that connection, remotely from the mobile device. The Final Written Decision expressly agrees with and adopts Petitioner’s contentions with regard to claim 10, and we maintain that position here. See FWD 56–59.” slip op. at 26
Patent outcomesUS 10,032,171 unpatentable§ 103 obviousnessPatents in suitUS 10,032,171 - Geneoscopy, Inc. v. Exact Sciences CorporationAll claims unpatentablePTAB · Jul 9, 2025 · IPR2024-00459 · APJ Ryan H Flax · IPR · Final written decision
Claims 1–20 are unpatentable as obvious under § 103 over each of the six asserted grounds.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Here, as in our Institution Decision, we do not discern a significant difference between the parties’ respective proposed definitions beyond the number of years of experience after obtaining a doctoral degree. Compare Pet. 12, with Prelim. Resp. 47, and Resp. 19–20; see also DI 7–8. Under either proposed definition, the ordinarily skilled artisan would have been very highly skilled and educated. For purposes of this Final Decision, we maintain that Patent Owner’s definition appears to be reasonable (and it falls between Petitioner’s two definitions asserted in the reexamination request and in the Petition). Further, Patent Owner’s proposed definition appears to comport with the level of skill in the art reflected in the prior art of record and the ’781 patent itself, for example, Vilkin’s authors are a group of medical doctors and an editor of the journal is a PhD, Joost Louwagie, the named inventor of the ’781 patent, holds a PhD in Biochemistry, and the authors of Itzkowitz are medical doctors and PhDs. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)); see Ex. 1005, 3 (list of authors); Ex. 1016 (Dr. Louwagie profile); Ex. 1055; see also generally Reply (Petitioner did not contest our similar determination at Institution). Therefore, we adopt and use Patent Owner’s definition of the ordinarily skilled artisan, set forth above. C.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that no claim construction is necessary in this proceeding. See generally Pet. Similarly, Patent Owner states that it “does not believe that claim construction is necessary to resolve patentability” in this proceeding. Resp. 21. “[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We agree with the parties that no construction of any claim term is necessary for purposes of our Final Decision. D.” slip op. at 14
- Expert testimonyOther
“Pet. 12. In support of these grounds for unpatentability, Petitioner relies on, inter alia, the 1st and 2nd Declarations of Duncan Whitney, PhD. Ex. 1002; Ex. 1080. In support of its positions, Patent Owner relies on, inter alia, the 1st and 2nd Declarations of Vadim Backman, PhD, and the Declaration of Peter Wood. Ex. 2001; Ex. 2022; Ex. 2023.” slip op. at 10
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“We have no reasonable doubt that aspects of the Cologuard product practice the invention of the ’781 patent’s claims 1 and 3, which are most generally directed to steps of collecting two portions of a fecal sample at home, and combining a respective buffer stabilizer/preservative with each of the two portions for claim 1, and then processing those fecal samples by testing for blood and nucleic acids (e.g., DNA) for claim 3. These appear to be nearly the most basic steps for using the Cologuard kit. See generally Ex. 2032. And, these steps do illustrate a certain ease of use and consumerfriendliness that may be a contributing factor in Cologuard’s success. See, e.g., Ex. 2022 ¶¶ 140–142, 155, 158–159, 170–171.” slip op. at 25
Patent outcomesUS 11,634,781 unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,634,781 - PTAB · Jun 3, 2025 · IPR2025-00054 · APJ John G New · IPR · Institution
The Board instituted inter partes review of claims 1–16 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Dohil.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Analysis After considering the as-yet uncontested evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in proving that at least one challenged claim of the ’828 patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least claim 1 is rendered obvious over Dohil in view of the understanding of a person of ordinary skill in the art, as argued in Ground 1, we institute inter partes review with respect to claim 1. Furthermore, because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’828 patent, based on all of the grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”)” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that no express construction of any claim term beyond the definitions provided by the Specification and, in the absence of such definitions, the ordinary and customary meaning, as understood by a person of ordinary skill in the art at the time of the invention, is necessary for the purpose of rendering this Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms … that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“appears to be consistent with the level of skill presented in the cited prior art. See, e.g., Exs. 1004–1007; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects,” as not reflecting the individual level of skill of a given skilled artisan. See Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). For the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had: [A] Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2–3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development.” slip op. at 7
Claim constructioncites Phillips · KSRPatents in suitUS 11,246,828 - PTAB · Jun 3, 2025 · IPR2025-00052 · APJ John G New · IPR · Institution
The Board instituted inter partes review of claims 1–17 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Dohil in view of ordinary skill.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Analysis After considering the as-yet uncontested evidence and arguments presented in the Petition, we determine that Petitioner has demonstrated a reasonable likelihood of success in proving at trial that at least one challenged claim of the ’069 patent is unpatentable. In particular, because Petitioner has demonstrated a reasonable likelihood that at least claim 1 is rendered obvious over Dohil in view of the understanding of a person of ordinary skill in the art, as argued in Ground 1, we institute inter partes review with respect to claim 1. Furthermore, because we determine that Petitioner has demonstrated a reasonable likelihood of success at trial in showing that at least one claim is unpatentable on at least one of the stated Grounds, we institute inter partes review of all challenged claims of the ’069 patent, based on all of the remaining grounds identified in the Petition. See 37 C.F.R. § 42.208(a); SAS Inst., Inc. v. Iancu, 584 U.S. 357, 371 (2018); PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”)” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s proposed definition of the level of ordinary skill in the art appears to be consistent with the level of skill presented in the cited prior art. See, e.g., Exs. 1004–1007; see also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself may reflect an appropriate level of skill in the art). However, at this point we reject the portion of Petitioner’s proposed definition that includes having “access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects,” as not reflecting the individual level of skill of a given skilled artisan. See Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986) (holding that “[t]he person of ordinary skill is a hypothetical person who is presumed to be aware of all the pertinent prior art. The actual inventor’s skill is not determinative”) (emphasis added, footnotes omitted). For the purposes of this Decision, we adopt Petitioner’s proposed definition as defining a person of ordinary skill in the art as a person who would have had: [A] Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2–3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that no express construction of any claim term beyond the definitions provided by the Specification and, in the absence of such definitions, the ordinary and customary meaning, as understood by a person of ordinary skill in the art at the time of the invention, is necessary for the purpose of rendering this Decision. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms … that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Petitioner argues that it would have been obvious to a person of ordinary skill in the art to formulate Dohil’s rapidly dissolving lozenge or tablet to disintegrate within 60 seconds when tested using the USP <701> Disintegration Test. Pet. 26. According to Petitioner, the knowledge of those of skill in the art is represented by, for example, the FDA’s Guidance for Industry on ODTs. Id. Petitioner points out that the FDA Guidance explains that ODTs “disintegrate[] rapidly, usually within a matter of seconds.” Id. (quoting Ex. 1005, 2). Petitioner also notes that the FDA recommends that ODTs have “an in-vitro disintegration time of approximately 30 seconds or less, when based on the United States Pharmacopeia (USP) disintegration test method or alternative (see section IV).” Id. (quoting Ex. 1005, 2). Petitioner argues that the FDA Guidance further “recommend[s] that applicants use the USP method for disintegration testing,” specifically “USP 29, <701> Disintegration.” Id. (citing Ex. 1005, 3 n.3). Petitioner argues that a skilled artisan would have been motivated to follow the FDA Guidance in formulating Dohil’s rapidly dissolving lozenge or tablet containing budesonide. Pet. 26. Petitioner contends that the FDA Guidance provides the agency’s thinking and recommendations on the topic of orally dissolving tablets. Id. (citing Ex. 1005, 1). Petitioner argues that the FDA regulates the use of pharmaceutical compositions in the United States, and that Dohil’s formulations were intended to “be used in therapy for human patients,” and the initial testing of its formulations was conducted within the United States. Id. at 26–27 (citing Ex. 1002 ¶¶ 28, 49). Petitioner contends that a person of ordinary skill in the art, seeking to formulate budesonide into an orally disintegrating tablet, would have been motivated to follow the FDA Guidance that such a tablet should disintegrate within 30 seconds or less when tested using the USP <701> Disintegration Test. Id. (citing Ex. 1050 ¶¶ 134–135; also citing Allergan, Inc. v. Sandoz Inc., 726 F.3d 1286, 1291–92 (Fed. Cir. 2013) (holding that “[t]he potential for FDA approval also may properly be considered, as it was here, in determining whether one of ordinary skill would be motivated to develop a drug product”).” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,632,069 - PTAB · Jun 3, 2025 · IPR2025-00055 · APJ Zhenyu Yang · IPR · Institution
The Board instituted IPR on claims 1–42 on all asserted grounds, finding a reasonable likelihood that Dohil renders claim 35 obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“On this record and for purposes of institution, we find Petitioner’s analysis persuasive and adopt it as our own. Thus, we find Petitioner has established a reasonable likelihood of prevailing on its assertion that Dohil renders claim 35 obvious. We thus institute an inter partes review as to all challenges raised in the Petition. See SAS Institute, Inc. v. Iancu, 584 U.S. 357, 365–71 (2018); see also 37 C.F.R. § 42.108(a) (“When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”).” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“Petitioner notes that the ’407 patent defines (1) “orally disintegrating tablet,” “orally dispersing tablet,” or “ODT;” (2) “about;” and (3) “having no significant systemic glucocorticoid or mineralocorticoid activity.” Pet. 17–19 (citing Ex. 1001, 2:46–49; 2:62–3:3, 3:16–21). We adopt the express definitions of these terms as set forth in the ’407 patent Specification. See Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998) (“When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.”).” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to expressly construe these or any other claim terms.” slip op. at 6
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner contends that a POSA would have been motivated to follow the FDA Guidance (i.e., the guidance on the matter from the U.S. regulatory agency concerned with pharmaceuticals) in formulating Dohil’s rapidly dissolving lozenge or tablet containing budesonide. Id. at 25. According to Petitioner, a POSA seeking to formulate budesonide into an orally disintegrating pharmaceutical composition would have been motivated to follow the FDA Guidance that such a composition should disintegrate within thirty seconds or less when tested using the USP <701> Disintegration Test. Id. (citing Ex. 1053 ¶ 128). Petitioner also argues that a POSA would have had a reasonable expectation of success in doing so based on Dohil’s detailed description of how to formulate budesonide into a rapidly disintegrating lozenge or tablet. Id. (citing Ex. 1002 ¶¶ 27–41). According to Petitioner, formulating orally disintegrating tablets that dissolve within “several seconds to about a minute” would have been a routine exercise by 2009, the earliest possible priority date of the ’407 patent. Id. at 26 (citing Ex. 1005, 2; Ex. 1018, 434). Petitioner contends that, at that time, there were many orally disintegrating systems and products that were commercially available, which would have bolstered a POSA’s expectation of success. Id. (citing Ex. 1017, 179–181; Ex. 1018, 436–439; Ex. 1053 ¶ 129). Thus, Petitioner concludes that Dohil would have suggested to a POSA limitation 35[iv]. Id.” slip op. at 9
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,486,407 - PTAB · Jun 3, 2025 · IPR2025-00056 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–30 and all three grounds, finding a reasonable likelihood that at least one claim would have been obvious over Perrett.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“In determining whether to deny institution under § 325(d), we use the following two-part framework: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may be instituted if the information presented by a petitioner in the petition, in view of the patent owner’s preliminary response and the preliminary record, shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314.” slip op. at 19
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (“POSA”) related to the ’061 patent would have a Ph.D., another advanced degree, or its equivalent, in areas related to pharmaceutics, chemistry, biology, medicine, or a related discipline, and 2-3 years of experience in formulation development. Alternatively, a POSA would have a lesser degree in those fields, with at least five or more years of experience in formulation development. The 8 See infra Section II.C. 9 At this stage of the proceeding, there is no evidence of objective indicia of obviousness or non-obviousness. POSA would also have had access to a medical doctor with a specialty in gastroenterology, and other individuals with expertise related to the above subjects. EX1070 ¶30. Pet. 5. At this stage of the proceeding, Patent Owner neither contests Petitioner’s proposed definition of the ordinarily skilled artisan nor provides an alternative definition. See generally Prelim. Resp. For the purposes of this Decision, we accept and use Petitioner’s proposed, and unopposed, definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the high level of skill in the art reflected in the prior art of record and the ’061 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). D.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownNo construction neededOther
“When the specification explains and defines a term used in the claims, without ambiguity or incompleteness, there is no need to search further for the meaning of the term.” Multiform Dessicants, Inc. v. Medzam, Ltd., 133 F.3d 1473, 1478 (Fed. Cir. 1998). The Specification expressly states that “[t]he terms ‘orally disintegrating tablet’, ‘orally dispersing tablet’, or ‘ODT’ refer to a solid dosage form of the present invention, which disintegrates rapidly in the oral cavity of a patient after administration, without chewing.” Ex. 1001, 5:12–15. At this stage of the proceeding, we interpret the language “orally disintegrating tablet” / “orally dispersing tablet” / “ODT” to have the meaning as expressly set forth in the Specification, as noted above. slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,260,061 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - PTAB · May 23, 2025 · IPR2025-00196 · APJ Ryan H Flax · IPR · Institution
The Board instituted IPR on claims 1–16 under both § 103 grounds, finding a reasonable likelihood that at least one claim would have been obvious over Best-2008 and Osada.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Under our current guidance, the filing of a Sotera-type stipulation is not conclusive, but remains “highly relevant” and will be considered “as part of [our] holistic analysis” here. See Guidance Memo. Whether Petitioner has other bases for invalidating the ’457 patent, such as the CarnoJet prior art product identified in the district court, is not a consideration here if such bases could not be asserted in this proceeding (and are not being used to argue over the asserted prior art here as a loop hole from the stipulation, of which there is no evidence).” slip op. at 15
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“satisfied that Petitioner has met its burden for institution. No argument by Patent Owner persuades us otherwise. Petitioner has shown that each limitation and element of claim 1 is taught or suggested by the combination of Best-2008 and Osada. Moreover, Petitioner’s asserted reason to combine the references is supported by the references’ disclosures: Best-2008 suggests filtration of its coolant is desirable, but provides no specific means for doing so; Osada teaches a way of filtering fluid from an open-top tank, similar to Best-2008’s.” slip op. at 42
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A POSITA[12]in the field of the ’457 patent at the time of the earliest possible effective filing date (December 14, 2012) would have had Bachelor of Science degree in mechanical or chemical engineering and at least two years of experience relating to the design and/or implementation of fluid circulation systems involving application of fluid dynamics and heat transfer principles. Additional education may serve as a substitute for a lack of experience and vice versa. (Ex-1003- Dahm at ¶¶36-41, 63-70.) Pet. 18–19. Patent Owner applies this same definition. Prelim. Resp. 6–7. At this stage of the proceeding, we accept and use Petitioner’s proposed and unopposed definition of the ordinarily skilled artisan. It appears that Petitioner’s proposed definition comports with the level of skill in the art reflected in the prior art of record and the ‘457 patent, itself. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Although either of the district court proceedings’ definitions of the term “weir” appears to accurately describe the feature, at this stage of the proceeding, we do not find it necessary to expressly interpret this claim language.” slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 10,405,457 - PTAB · May 16, 2025 · IPR2024-01487 · APJ Julia Heaney · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claim 1 would have been obvious over Nakazawa and Glaug.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition in view of the record at this stage, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. We also determine that the arguments and evidence of record do not support discretionary denial of the Petition under 35 U.S.C. § 314(a). Accordingly, we grant institution of an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“person of ordinary skill would modify either Nakazawa’s diffusion sheet or Glaug’s fluid acquisition system, but rather Petitioner argues “various layers in absorbent articles are invariably interchangeable.” Prelim. Resp. 41–42. Contrary to Patent Owner’s argument, as discussed above, Petitioner explains why and how a person of ordinary skill would modify Nakazawa’s diffusion sheet, and provides reasons for doing so. On this record, we find Petitioner’s reasoning sufficient.” slip op. at 24
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“Patent Owner further argues Nakazawa teaches away from Petitioner’s asserted modification in which Glaug’s lower non-perforated layer is added to Nakazawa’s diffusion sheet. Prelim. Resp. 42. Specifically, Patent Owner argues Nakazawa teaches that its embodiment in which the second absorbent material is wrapped in a hydrophilic sheet has the advantage of preventing leakage of super absorbent polymer (“SAP”) from the second absorbent material without impeding permeation of excretory fluid through the hydrophilic sheet. Id. at 43 (citing Ex. 1008 ¶ 85, Fig. 15). Patent Owner further relies on Petitioner’s argument that Nakazawa’s hydrophilic layer is analogous to the lower non-perforated layer in Glaug. Id. (citing Pet. 93–94). Therefore, Patent Owner argues, Nakazawa teaches that Glaug’s fluid acquisition system would impede permeation of fluid rather than promote it. Id. Patent Owner’s teaching away argument is unavailing based on the current record. Patent Owner improperly relies on Petitioner’s contention in its anticipation challenge based on Nakazawa, and characterizes it as an argument about Glaug. As further discussed in Section II.G below, Petitioner’s anticipation challenge is based on analogizing Nakazawa’s hydrophilic sheet to a core wrap feature identified in Patent Owner’s infringement contention in parallel district court litigation. See Pet. 92–93. Contrary to Patent Owner’s argument, Petitioner’s obviousness contention does not argue Nakazawa’s hydrophilic layer is analogous to Glaug’s nonperforated fibrous layer. Because Patent Owner is not properly characterizing Petitioner’s obviousness contention, Patent Owner’s teaching away argument is not persuasive.” slip op. at 24
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“Under Fintiv, we consider the following factors: 1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv at 5–6.” slip op. at 35
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 9,308,138
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.