- PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - PTAB · Sep 9, 2025 · PGR2025-00023 · APJ Michael J Fitzpatrick · PGR · Institution
Instituted PGR on claims 1–9 because the Board found it more likely than not that at least one challenged claim is unpatentable over the ’629 publication.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of a post-grant review requires that “the information presented in the petition filed under section 321, if such information is not rebutted, would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable” or that “the petition raises a novel or unsettled legal question that is important to other patents or patent applications.” 35 U.S.C. § 324(a)–(b). Determining whether to institute has been delegated to the Board. See 37 C.F.R. § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). Upon consideration of the Petition and the Preliminary Response, and for the reasons explained below, we determine that it is more likely than not that at least 1 of the claims challenged in the Petition is unpatentable. Accordingly, we grant the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“III. LEVEL OF ORDINARY SKILL IN THE ART Petitioner contends a person of ordinary skill in the art (“POSITA”) would have a Ph.D. degree in biological, chemical or biochemical engineering, molecular biology, or biochemistry and at least two years of experience in the field of utilizing or assessing horseshoe crab zymogen proteins (lysate, purified native and/or recombinantly produced) for endotoxin detection and quantitation. More education could substitute for experience to a certain extent, and vice versa. Pet. 22 (citing Ex. 1003 ¶¶48–49). Patent Owner does not dispute Petitioner’s description of a POSITA in its Preliminary Response. Prelim. Resp. 10. 1 In addition to other changes to Title 35, the AIA introduced amendments to 35 U.S.C. § 102. Because Patent Owner concedes that the ’725 application “contains, or contained at any time, a claim to a claimed invention that has an effective filing date on or after March 16, 2013” (Ex. 1022), the AIA version of § 102 applies to the ’109 patent. AIA § 3(n)(1)(B); Ex. 1001, 1:11–14 (claiming priority to the ’725 application). 2 US 2019/0241629 A1, published August 8, 2019 (“the ’629 publication” (Ex. 1015)). At this stage, we find Petitioner’s description of the level of ordinary skill in the art sufficiently supported by the record and apply it for purposes of this decision.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Neither party proposes an express construction of any claim term. See Pet. 22–23; Prelim. Resp. 10. We determine that no express claim construction is necessary based on the present record.” slip op. at 10
- Disclosure Requirements (§112) › Written description (Ariad)Not shown unpatentable
“To show that the claims of the ’109 patent are unpatentable for lack of written description, Petitioner would have needed to show that the specification as filed (i.e., the ’420 application) fails to reasonably convey to those skilled in the art that Patent Owner had possession of the claimed subject matter as of the July 3, 2023, filing date. Petitioner did not. Pet. 23– 24. Nor does Petitioner’s declarant offer testimony that could support such a showing. See Ex. 1003 ¶50 (“I have been asked to provide my opinions as to the state of the art in this field for purposes of determining what the inventors disclosed as their invention as of December 10, 2013.”), ¶51 (“Whenever I offer an opinion in this declaration about the knowledge of a POSA, the manner in which a POSA would have understood the claims of the ’109 patent or its description, the manner in which a POSA would have understood the prior art, or what a POSA would have been led to do based on the prior art, I am referencing the December 10, 2013 timeframe.”). Although the ’420 application is essentially identical to the ’767 application, the person of ordinary skill in 2013 is not the same as in 2023. See Ariad, 598 F.3d at 1351 (“[T]he [written description] test requires an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” (emphasis added)). Thus, the information presented in the Petition, which is limited to the perspective of a 2013 POSITA, does not demonstrate that it is more likely than not that at least 1 of the claims challenged in the Petition is unpatentable for lack of written description.” slip op. at 12
Claim construction§ 102 anticipation§ 112 disclosurePatents in suitUS 11,959,109 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - PTAB · Jul 16, 2025 · PGR2025-00012 · APJ Debra L Dennett · PGR · Institution
Instituted PGR on claims 1–3 based on five grounds; the Board found each ground met the institution threshold on the preliminary record.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority to determine whether to institute a post-grant review under 35 U.S.C. § 324. Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). A post-grant review may also be instituted when “the petition raises a novel or unsettled legal question that is important to other patents or patent applications.” See id. § 324(b). Applying that standard on behalf of the Director (37 C.F.R. § 42.4(a)) and in consideration of the Petition, Preliminary Response, and the evidence of record, we determine that the information presented shows that it is more likely than not that Petitioner would prevail in establishing unpatentability of claims 1–3 of the ’201 patent.” slip op. at 2
- Skill levelSkill level board ownOther
“At this stage of the proceedings, neither Petitioner’s nor Patent Owner’s proffered definitions of the level of skill appear appropriate. Petitioner’s proposal requires as little as a bachelor’s degree in organic chemistry and two years of experience as a laboratory technician working on development of molecules with targeted biological activity, and an ambiguous “understanding” of certain processes. Patent Owner’s proposal, other the other hand, requires multiple years of both formal training and actual, practical experience in highly specialized fields that involve detection of optical or radiolabeled compounds and use of molecular imaging techniques such as PET and SPECT. For the purposes of this decision, on the record at this time, we find that a POSA would have had a Ph.D. in chemistry, biochemistry, or a comparable field or an M.D., and at least four years of experience in chemical synthesis of compounds that may be used to target biologically-significant tissues. This definition appears consistent with the level of skill shown in the prior art references of record. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). The parties will have the opportunity to cross-examine Dr. Martin and Dr. VanBrocklin in this proceeding to develop a full record for us to determine the weight that each expert’s testimony should be given. We invite the parties to further brief the definition of a POSA here, and whether we should discount either experts’ testimony due to lack of qualifications.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“c) Analysis On the present record, we find that “low molecular weight” is not limited to Patent Owner’s proposed “from about 50 Daltons to about 1,500 Daltons.” The cited evidence relied on in the Pomper Declaration all concerns metabolomics and metabolites, and we find no reason that even a vague definition of metabolites applies to the claimed compounds. See Ex. 1002, ¶ 102. Moreover, the uncontested fact that several of the B moieties alone—without the A moiety or L linker—specifically identified in the ’201 patent fall outside of Patent Owner’s proposed definition is persuasive (see id., ¶ 103), as we normally do not interpret claim terms in a way that excludes examples disclosed in the specification. See, e.g., Verizon Servs. Corp. v. Vonage Holdings Corp., 503 F.3d 1295, 1305 (Fed. Cir. 2007) (rejecting proposed claim interpretation that would exclude disclosed examples in the specification). In addition, the opinion stated in the Pomper Declaration that “the term of ‘low molecular weight’ is well accepted in the chemical arts’” and the declarant “recognize[s] that low molecular weight compounds would have a molecular weight of typically form about 50 Daltons to about 1,500 Daltons” is offered by a co-inventor. We, as factfinder, have discretion to weigh the credibility of expert witnesses and to give each item of evidence such weight as appropriate. See In re Am. Acad. of Sci. Tech Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”). In this case, we find that the published references on metabolites do not support the opinion. In re Am. Acad. of Sci. Tech Ctr., 367 F.3d at 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”) The Pomper reference (Ex. 1006) also uses the term “low molecular weight”—without further characterization of the term—and is uninformative as to the meaning of the term. See Ex. 2002, ¶ 60; Ex. 1006, ¶ 12. The table giving the molecular weight of a “selection of compounds disclosed by Pomper” (see Ex. 2002, ¶ 62) is not persuasive in defining “low molecular weight,” as it does not explain how those included were “selected” and does not include molecular weights for all of the examples.7 In addition, Patent Owner’s definition does not appear to apply to all claimed compounds.8 7 At least one of the examples (SRV73) not included in the table appears to have a molecular weight well over “about 1,500 Daltons.” 8 See, e.g., claim 113 of Ex. 1006. Patent Owner’s arguments distinguishing “low molecular weight” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“The ’201 patent defines “alkyl” as “a straight (i.e., unbranched) or branched chain, acyclic or cyclic hydrocarbon group, or combination thereof” “ that has “the number of carbon atoms designated (i.e., C1–C10 means one to ten carbons, including 1, 2, 3, 4, 5, 6, 7, 8, 9, and 10 carbons)” and “[i]n particular embodiments, the term ‘alkyl’ refers to C1-20 inclusive, including 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, and 20 carbons” “unless otherwise stated.” Ex. 1001, 39:44–58. Although substituents at the R1x position in the claims are limited to “C1-6alkyl,” those at position R3x are not. Ex. 1001, Certif. Corr. Patent Owner’s representation that “Jansen I provides ‘the following definitions’ stating that ‘alkyls groups of this invention comprise from 1 to 6 carbon atoms’” is inaccurate. See Prelim. Resp. 19. In fact, Jansen I states: The term “alkyl” by itself or as part of another substituent refers to a fully saturated hydrocarbon of Formula CxH2x+1 wherein x is a number greater than or equal to 1. Generally, alkyl groups of this invention comprise from 1 to 6 carbon atoms. Alkyl groups may be linear or branched and may be substituted as indicated herein. When a subscript is used herein following a carbon atom, the subscript refers to the number of carbon atoms that the named group may contain. Ex. 1007, 22:16–23 (emphasis added). Neither the ’201 patent nor its incorporation by reference of Jansen I would have conveyed to a POSA that the “(CO)alkyl” of the substituent in the R3x position in the claims is intended to comprise from one to six carbon atoms or is limited to any particular length and size. “(C(O)alkyl,” having no number of carbon atoms designated, means” slip op. at 15
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · NautilusPatents in suitUS 11,938,201 - Trove Brands, LLC v. Camelbak Products, LLCInstitution deniedPTAB · Jul 8, 2025 · IPR2025-00155 · APJ James A Worth · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 3–9, 11–17, or 19 were unpatentable on the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under [35 U.S.C. §] 311 and any response filed under [35 U.S.C. §] 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018).1 For the reasons set forth below, we determine that Petitioner has not demonstrated that there is a reasonable likelihood that at least one of claims 1, 3–9, 11–17, and 19 of the ’187 patent is unpatentable based on the grounds set forth in the Petition, and we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products. Pet. 19 (citing Ex. 1003 ¶ 29). Petitioner asserts that more work experience may substitute for a lower level of education, and vice versa. Id. Patent Owner admittedly sets forth “a similar, though slightly different, level of ordinary skill”: a bachelor’s degree in mechanical engineering or the equivalent coursework and approximately one year of experience with liquid-containing devices, with more work experience substituting for less education and vice versa. Prelim. Resp. 27 (citing Ex.2001 ¶¶ 60–64). Patent Owner discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision on whether to institute this proceeding. Id. For purposes of this decision, we adopt Petitioner’s proposed level of skill as being consistent with the prior art, although our conclusion on whether to institute would be unchanged under either definition.” slip op. at 10
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“The failure to use the word “means” in a claim element creates a rebuttable presumption that § 112 ¶ 6 does not apply. Williamson v. Citrix Online, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (en banc). The presumption can be overcome and § 112 ¶ 6 will apply if the challenger demonstrates that the claim term fails to “recite[ ] sufficiently definite structure” or else recites “function without reciting sufficient structure for performing that function. “Construing a means-plus-function claim term is a two-step process.” Id. at 1351. “The [tribunal] must first identify the claimed function.” Id. “Then, the [tribunal] must determine what structure, if any, disclosed in the specification corresponds to the claimed function.” Id. There may be multiple claimed functions, each with disclosed corresponding structure. See id. at 1351–52.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We are persuaded by Patent Owner that the term “automatically” in “to automatically disengage the first and second catch structures” means that it is not just the force applied by the user that disengages the first and second catch structures, but also the bias of the mouthpiece that helps to disengage the first and second catch structures. In the first instance, we agree with Patent Owner that the claim itself recites that, upon actuation, the mouthpiece assembly is “release[d]” to “move via its bias from the stowed configuration to the dispensing configuration.” See Ex. 1001, 21:59–64. This meaning is supported by the Specification which states: “In some examples, the mouthpiece assembly is biased toward the dispensing configuration and thus moves automatically under its bias upon release by the user-release mechanism.” Ex. 1001, 1:64–67. We further agree with Patent Owner that the plain and ordinary meaning of “automatic” is that the user operation alone is not responsible for the action. For example, in one dictionary cited by Petitioner, “automatic” is defined as “2: having a self-acting or self-regulating mechanism.” See Ex. 2007, 1.11 The district court construction is consistent therewith. The district court identified two functions, the first of which is the same as that of the ’028 patent, i.e., “Automatically disengaging the first and second catch structures upon actuation of the user release mechanism and thereby releasing the mouthpiece assembly to move via its bias from the stowed configuration to the dispensing configuration.” See Section II.C.1, supra. In discussing that function, the district court states: “While a user may impart force upon user engagement portion 260 to release the mouthpiece, the bias of the mouthpiece towards the dispensing configuration causes the mouthpiece to move automatically, satisfying the requirements of Claim 1.” Ex. 2002, 16. We conclude that the term “automatically” in “adapted to” slip op. at 17
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,684,187 - PTAB · Jun 6, 2025 · IPR2025-00140 · APJ James A Worth · IPR · Institution
The Board instituted IPR of claims 1–18 on all petitioned challenges, finding a reasonable likelihood that at least claim 1 is obvious over Nakajima and the knowledge of a person of ordinary skill.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under [35 U.S.C. §] 311 and any response filed under [35 U.S.C. §] 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). For the reasons set forth below, we determine that Petitioner has demonstrated that there is a reasonable likelihood that at least one of claims 1–18 of the ’250 patent is unpatentable, and we institute an inter partes review of claims 1–18 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products. Pet. 15 (citing Ex. 1002 ¶ 25). Petitioner asserts that more work experience may substitute for a lower level of education, and vice versa. Id. Patent Owner admittedly sets forth “a similar, though slightly different, level of ordinary skill”: a bachelor’s degree in mechanical experience with liquid-containing devices, with more work experience substituting for less education and vice versa. Prelim. Resp. 28 (citing Ex. 2001 ¶ 50). Patent Owner discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision on whether to institute this proceeding. Id. For purposes of this decision, we adopt Petitioner’s proposed level of skill as being consistent with the prior art, although our conclusion on whether to institute would be unchanged under either definition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“For purposes of this decision on institution, we adopt the proffered dictionary definition of “mouthpiece” as “a part (as of an instrument) that goes in the mouth or to which the mouth is applied” (see Ex. 2005), and we construe this as an intended use of this component of the apparatus, because this definition is consistent with the plain and ordinary meaning of the term which is a compound of “mouth” and “piece” and also because this definition is consistent with the Specification. For example, the Specification describes the use of the mouthpiece as follows: “In use, the mouthpiece is adapted to be configured to the dispensing configuration by a user placing the mouthpiece in the user’s mouth and biting upon or otherwise compressing the appropriate portions of sidewalls 92 of the mouthpiece.” Ex. 1001, 8:45–49. We note that, although the Specification refers to bite-actuation of the mouthpiece, for example in the field of the disclosure and certain embodiments (e.g., Ex. 1001, 1:25–27), the independent claims do not require bite-actuation. The Specification identifies the mouthpiece as item 72 (which is depicted, for example, in Figure 25, reproduced supra). Ex. 1001, 3:7‒8. 7 Exhibit 2005 appears to be from an online Merriam-Webster dictionary accessed March 13, 2025. Ex. 2005, 4. At this time, there is no argument in the preliminary record that this definition would have been different before the critical date of the patent.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Although the construction of this limitation may be helpful in deciding the issues of unpatentability, we determine that the construction of this term would benefit from further briefing during the trial phase of this proceeding, and we invite the parties to continue to brief this issue. Therefore, we do not provide a preliminary construction of the term at this time.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,851,250 - Trove Brands, LLC v. Camelbak Products, LLCInstitution deniedPTAB · May 22, 2025 · IPR2025-00146 · APJ Linda E Horner · IPR · Institution
The Board denied institution because Trove did not show a reasonable likelihood of prevailing on any challenged claim under the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition and the preliminary response shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and the Preliminary Response, and for the reasons explained below, we determine that Petitioner has not shown a reasonable likelihood that it would prevail with respect to at least one of the challenged claims. Thus, we deny the Petition and do not institute an inter partes review of claims 1, 3, 5–8, and 10–19 of the ’879 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner and Patent Owner propose constructions for the term “user release mechanism,” as recited in claim 1. Pet. 20–23; Prelim. Resp. 27–30. Patent Owner also proposes constructions for “automatically disengage the first and second catch structures,” as recited in claim 1. Prelim. Resp. 30– 32. For purposes of this particular Decision, we determine that no term requires construction to decide whether to institute inter partes review of the ’879 patent. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“First, Petitioner’s reason to modify Kiyota “to provide the advantage of a bite actuated mouthpiece” (Pet. 42) does not explain why one would use Choi’s mount 100. Petitioner has not clearly established that to use a bite-actuated mouthpiece requires mount 100. Choi describes that “cap assembly 14 may include a mount 100 to which the bite-actuated mouthpiece is removably mounted, or secured.” Ex. 1005 ¶ 46. This description suggests that mount 100 is not a required component for a bite-actuated mouthpiece. Our understanding is supported by Patent Owner’s expert, who testified that using Choi’s mount as a “rigid collar member” in Kiyota’s mouthpiece assembly does not require combining its bite-actuated valve because “the bite-actuated portion has nothing to do with the alleged rigid collar member portion.” Ex. 2001 ¶ 119 (citing Ex. 1005 ¶ 46); see also Prelim. Resp. 55. Thus, Petitioner has not adequately supported this first reason to modify Kiyota to use Choi’s mount 100.” slip op. at 22
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,165,879 - Trove Brands, LLC v. Camelbak Products, LLCInstitution deniedPTAB · May 7, 2025 · IPR2024-01501 · APJ Linda E Horner · IPR · Institution
The Board denied institution because Trove did not show a reasonable likelihood of proving claims 1, 2, 5, 6, 8, 9, 15, 16, or 21 obvious over the asserted prior art.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition and the preliminary response shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and the Preliminary Response, and for the reasons explained below, we determine that Petitioner has not shown a reasonable likelihood that it would prevail with respect to at least one of the challenged claims. Thus, we deny the Petition and do not institute an inter partes review of claims 1, 2, 5, 6, 8, 9, 15, 16, and 21 of the ’028 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner argues that a POSITA would have “a bachelor’s degree in mechanical engineering or the equivalent coursework and approximately one year of experience with liquid-containing devices, with more work experience substituting for less education and vice versa.” Prelim. Resp. 23 (citing Ex. 2001 ¶¶ 56–65). Patent Owner also states that it “discerns no material difference between the definitions provided by the parties for purposes the Board’s decision on whether to institute this proceeding.” Id. We agree that there appears to be no material difference in the parties’ definitions of the level of ordinary skill in the art. For the purposes of this Decision, we apply Petitioner’s definition of the level of ordinary skill in the art. We determine that this definition is consistent with the prior art of record and the skill reflected in the Specification of the ’028 patent, based on our review of the limited record. Moreover, the prior art itself may be sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not” slip op. at 11
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“as a means-plus-function limitation under 35 U.S.C. § 112, sixth paragraph, because “mechanism” is a nonce word for performing the claimed function without reciting structure for performing that function, and a POSITA would not have understood the term to have “a sufficiently definite meaning as the name for a structure that performs the claimed function.” Pet. 16–17 (citing Ex. 1003 ¶ 39). For claim 1, Petitioner identifies two distinct structures described in the ’028 patent that correspond to the claimed “user release mechanism” for performing the claimed functions. Id. at 34. Specifically, Petitioner asserts that the ’028 patent describes a first embodiment in which the corresponding structure includes sliding member 238, and its component parts. Id. at 34– 35 (citing Ex. 1001, 12:50–13:25, 13:29–33). In the second embodiment, the corresponding structure includes user engagement portion 260 on rigid collar 170. Id. at 35–36 (citing Ex. 1001, 13:40–54). Petitioner does not separately address the structure corresponding to the “user release mechanism” as recited in claim 21. Id. at 53‒54 (relying on the same arguments presented for unpatentability of claim 1). court issued a claim construction order in the parallel litigation construing the term “user release mechanism” as a means-plus-function limitation under § 112, sixth paragraph. Prelim. Resp. 23 (citing Ex. 2002, 12–15). The district court ruled that the corresponding structure for claim 1 includes “[s]liding member 238, including its component parts,” or “[u]ser engagement portion 260.” Ex. 2002, 15. For claim 21, the district court ruled that the corresponding structure includes “[s]liding member 238, including its component parts” or “[u]ser engagement pad 240, planar portion 242, tabs 244, collar engagement portion 254, depression 256.” Id. at 17. Patent Owner indicates that, “[f]or purposes of this proceeding only,” it does not dispute that the claimed user release mechanisms are means-plusfunction limitations, and it does not dispute the corresponding structure identified by Petitioner, even though the district court did not specifically identify engagement portion 260 as corresponding structure for claim 21. Prelim. Resp. 25 (citing Ex. 2002, 15–19). Although Patent Owner does not dispute Petitioner’s proposed interpretation of the “user release mechanism,” because claim interpretation is a matter of law and the dispositive issue in this Decision turns on the interpretation of this claim limitation, we address it in this Decision. We agree with the parties that the “user release mechanism” elements recited in claims 1 and 21 are means-plus-function limitations governed by § 112, sixth paragraph. See 35 U.S.C. § 112 ¶ 6 (“An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.”). “means,” it uses the nonce word “mechanism” without reciting structure for performing the functions recited in the claims. See Williamson v. CitrixOnline, LLC, 792 F.3d 1339, 1350 (Fed. Cir. 2015) (“Generic terms such as ‘mechanism,’ ‘element,’ ‘device,’ and other nonce words that reflect nothing more than verbal constructs may be used in a claim in a manner that is tantamount to using the word “means” because they ‘typically do not connote sufficiently definite structure’ and therefore may invoke § 112, para. 6.”).” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“[U]nder § 112, ¶ 6 equivalence, functional identity is required” and “[s]tructural equivalence under § 112, ¶ 6 is met only if the differences are insubstantial, that is, if the assertedly equivalent structure performs the claimed function in substantially the same way to achieve substantially the same result as the corresponding structure described in the specification.” (citing Chiuminatta Concrete Concepts, Inc. v. Cardinal Indus., Inc., 145 F.3d 1303, 1308 (Fed. Cir. 1998)). Here, Petitioner states that Kiyota’s lock release buttons 40 “perform the claimed function in the same way to achieve the same result” as the ’028 patent’s sliding member 238, and its component parts (Pet. 37) without providing sufficient supporting explanation or evidence. Petitioner explains only that the two structures operate in “substantially the same way” by a user pressing an element that that slides towards the mouthpiece assembly to disengage the catch structures. Id. at 37–38 (citing Ex. 1003 ¶ 89). The Petition does not discuss any of the differences between Kiyota’s structure and the ’028 patent’s structure or provide an explanation of why these differences are insubstantial. Indeed, as Patent Owner persuasively explains, there are notable differences in the “way” the two structures perform the claimed function and the “result” they achieve. See Prelim. Resp. 39–40 (discussing the ’028 patent’s one-finger operation and indirect catch disengagement, versus Kiyota’s two-finger operation and direct catch disengagement). Moreover, the analysis in Dr. Vallee’s declaration substantially parallels the discussion in the Petition and does not provide any additional explanation or evidence to show that the differences between the “way” the two structures operate or the “result” they achieve are insubstantial. Compare Ex. 1003 ¶¶ 85–91, with Pet. 34–38. For these reasons, Petitioner fails to show sufficiently that Kiyota discloses an equivalent structure to the structure described in the ’028 patent corresponding to the “user release mechanism” recited in claim 1. Accordingly, Petitioner has not met its burden to show a reasonable likelihood that claim 1 is unpatentable as obvious over Kiyota. slip op. at 23
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,782,028 - Catalyst Orthoscience Inc. v. Shoulder Innovations, Inc.Institution deniedPTAB · Apr 24, 2025 · PGR2025-00001 · APJ James A Tartal · PGR · Institution
The Board denied institution of post-grant review of claims 1–22, exercising its discretion under § 324(a) based on the Fintiv factors.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv 5−6. We consider these factors to assess “whether efficiency, fairness, and the merits support the exercise of authority to deny institution in view of an earlier trial date in the parallel proceeding.” Id. at 6. In” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“parties, we do not find the merits to be particularly strong on the current record. For example, limitation [1-4] recites, in part, “a locking nut having . . . an external thread on an outside surface of the locking nut.” Ex. 1001, 9:46–47. In alleging obviousness based in part on Orphanos, Petitioner equates the claimed “locking nut” to Orphanos’s collet 230 in a first embodiment of Orphanos, or Orphanos’s collet portion 1052 in a second embodiment of Orphanos. Pet. 37–38. Petitioner acknowledges that the collet and collet portion do not have external threads, but rather are designed to have a snap-fit engagement with the inner sidewall of the baseplate’s central throughbore. Id. at 38. Petitioner argues that modifying the collet and collet portion to have external threads would have been obvious to the skilled artisan in view of Orphanos’s teachings and the knowledge of a person having ordinary skill in the art. Pet. 38–42 (arguing, inter alia, that it would have been “a substitution of a known part for a known problem” and “obvious as a matter of design choice”). Petitioner does not allege that replacing the snap-fit coupling with external threads would either: (1) result in any advantages; or (2) preserve any of Orphanos’s stated benefits of its snap-fit arrangement. See Pet. 34–37. That Petitioner describes no advantages to making its proposed modification potentially undermines Petitioner’s case that the skilled artisan would have done so. Cf. Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”).” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANot reached
“Petitioner’s arguments regarding the central post and locking nut include an implicit claim construction argument that these components need not be separate structures. Pet. 74, 76–81. Patent Owner, on the other hand, would have us interpret the claim to require that they be separate structures. Patent Owner raises credible evidence to support its theory. Specifically, Patent Owner directs us to the language of claim 1, which separately recites “a central screw” and “a locking nut.” Prelim. Resp. 51; see Ex. 1001, 9:44–53. Patent Owner further contends, in view of the claim language, that the claimed central post and locking nut are separate and distinct components. According to Patent Owner, however, Lefebvre’s main head and anchor rod portions are parts of a single monolithic anchoring screw. Prelim. Resp. 53–58. Where a claim lists elements separately, there is a rebuttable presumption that these elements have separate and distinct physical structures. See Google LLC v. EcoFactor, Inc., 92 F.4th 1049, 1058 (Fed. Cir. 2024) (citing Powell v. Home Depot U.S.A., Inc., 663 F.3d 1221, 1231–1232 (Fed. Cir. 2011)). The presumption may be rebutted by the intrinsic record. Id. At this stage, however, Petitioner does not address that claim 1 appears to separately recite a central post and a locking nut, and does not direct us to any portion of the intrinsic record that might rebut the presumption that these elements are, therefore, separate and distinct structures. See Pet. 73–77. Petitioner also argues that the claim terms “baseplate central channel” and “central channel . . . configured to interface with the baseplate” are indefinite. Pet. 95–102. Patent Owner argues that the plain and ordinary meaning of the terms is clear and that Petitioner “had no problem” arguing how the asserted art purportedly rendered the claims obvious. Prelim. Resp. 69–77.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)Not reached
“Petitioner also argues that the claim terms “baseplate central channel” and “central channel . . . configured to interface with the baseplate” are indefinite. Pet. 95–102. Patent Owner argues that the plain and ordinary meaning of the terms is clear and that Petitioner “had no problem” arguing how the asserted art purportedly rendered the claims obvious. Prelim. Resp. 69–77. In sum, even if Petitioner’s contentions show it is more likely than not that at least one of the claims challenged in the Petition is unpatentable, we find Patent Owner’s arguments identify credible weaknesses in Petitioner’s contentions. Accordingly, we find that that the sixth Fintiv factor is neutral and does not weigh against discretionary denial.” slip op. at 18
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 12,023,254 - PTAB · Apr 21, 2025 · IPR2024-01504 · APJ James A Worth · IPR · Institution
The Board instituted IPR on claims 1–4, 6, 7, 9, and 10 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Iafrate and Kivioja.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“On this preliminary record, we agree with Patent Owner that Petitioner’s asserted level of ordinary skill in the art is higher than warranted when Petitioner argues that a person of ordinary skill “further would have had specific experience with implementing and designing library preparation methods.” Pet. 21–22. However, we disagree with Patent Owner that a POSA only need to “have had experience with DNA sequencing methods” (Prelim. Resp. 8) because an artisan with experience with only pre-NGS sequencing methods would not qualify as a person of ordinary skill. Instead, for purposes of this Decision, we find a person of ordinary skill would have had a Ph.D. in the field of chemistry, molecular biology, or biochemistry. Alternatively, a POSA would have had a B.S. or M.S. degree with three to five years of experience working in any of those fields. The person of ordinary skill would have had experience with NGS sequencing methods and a working knowledge of how those methods functioned. This definition of a person of ordinary skill is consistent with the skill level reflected in the disclosures of the ’357 patent and prior art. We further note that neither aspect of the dispute over the skill level affects our decision to institute review.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“1. “indexing site” Petitioner argues that the ’357 patent defines “indexing site” as a sample index, specifically, “a nucleic acid sequence that acts as an index for multiple polynucleotide samples, thus allowing for the samples to be pooled together into a single sequencing run, which is known as multiplexing.” Pet. 23 (citing Ex. 1004, 4:40–44). Patent Owner does not disagree other than to argue that no claim requires construction. The ’357 patent states: An indexing site is a nucleic acid sequence that acts as an index for multiple polynucleotide samples, thus allowing for the samples to be pooled together into a single sequencing run, which is known as multiplexing. provide a definition for “indexing site,” and we construe the term in accordance therewith.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“3. “identifying sequence reads with identical identifier and target sequences as duplicates” Although the parties do not request construction of this limitation, we note that the parties may wish to address the construction of this limitation after institution. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (claims are construed only to the extent necessary the term “duplicates” means that the sequences are identical. We observe that the ’357 patent states: “A duplicate sequencing read can be a sequencing read with the same identifier site and target sequence as another sequencing read in the population of sequencing reads.” Ex. 1004, 4:12–15. The claim does not use the exact wording as the Specification.4” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“4. “comprising” The parties may address the meaning of the transitional phrase “comprising” and whether the prior art meets the claim if the prior art discloses a method of identifying as duplicates those sequence reads with identical labels and target fragments and, in addition also identifies other sequence reads as duplicates, including sequence reads with some mutations resulting from PCR or SBS error. See Ex. 1079 ¶ 117. On this preliminary record, we construe “comprising” as an open-ended transition that is not limited to the listed steps. See Vivid Techs., Inc., 200 F.3d at 811.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,098,357
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.