- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentablePTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision
Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
Patent outcomesUS 10,574,894 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,574,894 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision
Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13
- Prior constructionPrior construction adoptedDecided for petitioner
“In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner
“evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62
Patent outcomesUS 11,336,832 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,336,832 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.
RulingsFinal written decision- BurdenFwd all claims patentableNot shown unpatentable
“4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18
- Skill levelSkill level petitioner adoptedOther
“A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - Apple Inc. v. Resonant Systems, Inc.All claims unpatentablePTAB · Oct 23, 2025 · IPR2024-00983 · APJ Norman H Beamer · IPR · Final written decision
Claims 1–6, 10, 17, 19, and 20 are unpatentable under § 103 over Alexander and Cosper; the alternative Gregorio-based grounds did not establish unpatentability.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“112(f). Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015). But if the term does not use the word “means,” then it is presumed not to be subject to Section 112(f). Id. “That presumption can be overcome, but only if the challenger demonstrates that the claim term fails to recite sufficiently definite structure or else recites function without reciting sufficient structure for performing that function.” Samsung Elecs. Am., Inc. v. Prisua Eng’g Corp., 948 F.3d 1342 (Fed. Cir. 2020). “The correct inquiry, when ‘means’ is absent from a limitation, is whether the limitation, read in light of the remaining claim language, specification, prosecution history, and relevant extrinsic evidence, has sufficiently definite structure to a person of ordinary skill in the art.” Apple Inc. v. Motorola, Inc., 757 F.3d 1286, 1298 (Fed. Cir. 2014).” slip op. at 12
- Prior constructionPrior construction adoptedDecided for patent owner
“both parties have asserted in the Apple Litigation that the “control component” requirement is a means-plus-function limitation subject to 35 U.S.C. §112(f), despite the fact that the control component limitation does not recite “means for.” Pet. 3 (citing Ex. 1012, 3–8; Ex. 1013, 13); PO Resp. 6–7. Indeed, the court in the Apple Litigation has concluded that the control component requirement is subject to 35 U.S.C. § 112(f), and has construed that requirement accordingly: Function: receiving control signals input to the oscillating resonant module; receiving outputs from the one or more sensors; controlling oscillation of the mass to produce a vibration response according to the received control signals by generating, using one or more of the received sensor outputs, control outputs to an actuator that drives the mass to oscillate. Structure: a microcontroller, a processor, a microprocessor, or a CPU that performs the algorithm shown in Figure 45 or the algorithm described in the corresponding text. See, e.g., 31:19–32:13, and equivalents thereof. Ex. 2001, 10; Ex. 2002, 40. Because of the Apple Litigation record, Petitioner presents its challenges in the alternative, first applying a plain meaning approach to the control component requirement, and also analyzing the requirement under the construction adopted in the Apple Litigation. Pet. 3–5. We adopt the court’s construction in the Apple Litigation. 35 U.S.C.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) “would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of vibration-generating systems; additional years of experience could substitute for the advanced-level degree.” Ex. 1003 ¶ 27. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 2. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’882 patent specification.” slip op. at 9
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“(1) Analogous Art Our reviewing court has stated that “[t]wo separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed and, (2) if the reference is not within the field of the inventor's endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (citations and internal quotes omitted). While these two criteria are helpful in many instances, we must not lose sight of the key question at hand: what is “prior art” as that term is used in 35 U.S.C. § 103(a)? References that are “too remote to be treated as ‘prior art’” are excluded from the obviousness analysis. In re Sovish, 769 F.2d 738, 741, 226 (Fed. Cir. 1985). The non-analogous art test provides helpful insight on the underlying question of what is “prior art” within the meaning of the statute; we should not, however, be blind to the reality of the circumstances of the case before us. In re Wood, 599 F.2d 1032, 1036 (CCPA (1979). Nor should we adhere to rigid and mandatory formulas that overly limit the inquiry. KSR Int’l Co., 550 U.S. at 419.” slip op. at 22
Patent outcomesUS 11,152,882 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,152,882 - Apple Inc. v. Resonant Systems Inc., D/B/A/ RevelhmiAll claims unpatentablePTAB · Oct 9, 2025 · IPR2024-00698 · APJ Brian D Range · IPR · Final written decision
Claims 1–5 are unpatentable as obvious under § 103 based on the asserted combinations of Izumi, Cosper, Rossi, Ibuki, and Aldrich.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the degree. Pet. 4 (citing Ex. 1003 ¶ 30–31). Patent Owner contends a POSITA would have had (1) a bachelor’s degree in electrical engineering, mechanical engineering, or a comparable field of study, and (2) at least two years of professional experience with electro-mechanical control systems, or other similarly relevant industry experience. PO Resp. 2–3. Additional relevant industry experience may compensate for lack of formal education or vice versa. Id. Patent Owner further contends this is similar to Petitioner’s POSITA contention. Id. at 3. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’767 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Our reasoning herein would be the same under Patent Owner’s similar proposal.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for petitioner
“Claim 1, Preamble. Both parties agree that the preamble of claim 1 is limiting. PO Resp. 6. We agree that claim 1’s preamble is limiting. We also note that the parties agreed that this preamble is limiting in the District Court case. Dist. Ct. Const. 10.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Because neither party asserts that construction of “driving component” or “control component” is necessary to resolve the issues before us, we decline to expressly construe these claim terms. See, e.g., Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For clarity, because Petitioner argues that plain and ordinary meaning is appropriate and because Patent Owner does not dispute that construction, we adopt the plain and ordinary meaning of these claim terms when comparing the challenged claims to the prior art. Other claim terms. It is unnecessary for us to expressly construe other claim terms for purposes of this Decision. See, e.g., Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Petitioner argues that a person having ordinary skill in the art would have combined Izumi’s module to include multiple sensors in accordance with Cosper’s teachings. Pet. 15. Petitioner argues that the sensors would monitor the moving element and generate a control signal in accordance with Izumi. Id. at 15–16. Petitioner further argues that Izumi’s controller would have been implemented using a microprocessor and memory as Cosper suggests. Id. at 16. Petitioner argues three reasons why a person having ordinary skill in the art would have combined Izumi with Cosper’s teachings. Id. at 16–19. First, Petitioner argues that a person having ordinary skill in the art would have looked to Cosper as a way to further Izumi’s objective of having a sensor that detects the and controls the movement of the moving element. Id. at 16–17. Second, Petitioner argues that the combination of Izumi and Cosper would have enhanced reliability of the feedback sensors by capturing “data specific to different operating parameters.” Id. at 17–18. Third, combining the references’ teachings would “facilitat[e] implementation of software instructions” by using a microprocessor and memory. Id. at 18–19. Patent Owner does not dispute Petitioner’s rationale to combine the references’ teachings. Based on our review and consideration of the record, we determine that a preponderance of the evidence supports that a person of ordinary skill in the art would have combined the teachings of Izumi and Cosper in the manner Petitioner argues (“the Izumi-Cosper combination”).” slip op. at 17
Patent outcomesUS 8,093,767 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,093,767 - Apple Inc. v. Resonant Systems Inc., D/B/A/ RevelhmiAll claims unpatentablePTAB · Oct 9, 2025 · IPR2024-00697 · APJ Brian D Range · IPR · Final written decision
Claims 1–5 are unpatentable under § 103 based on the combinations of prior art listed in the decision.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the degree. Pet. 4 (citing Ex. 1003 ¶ 30–31). Patent Owner contends a POSITA would have had (1) a bachelor’s degree in electrical engineering, mechanical engineering, or a comparable field of study, and (2) at least two years of professional experience with electro-mechanical control systems, or other similarly relevant industry experience. PO Resp. 2–3. Additional relevant industry experience may compensate for lack of formal education or vice versa. Id. Patent Owner further contends this is similar to Petitioner’s POSITA contention and states that “Patent Owner does not believe that any of the arguments herein would change if the Board were to adopt Petitioner’s definition for the level of ordinary skill rather than Patent Owner’s.” Id. at 3. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’767 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Our reasoning herein would be the same under Patent Owner’s similar proposal.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for petitioner
“Claim 1, Preamble. Both parties agree that the preamble of claim 1 is limiting. Pet. 6; PO Resp. 6. We agree that claim 1’s preamble is limiting. We also note that the parties agreed that this preamble is limiting in the District Court case. Dist. Ct. Const. 10.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Because neither party asserts that construction of “driving component” or “control component” is necessary to resolve the issues before us, we decline to expressly construe these claim terms. See, e.g., Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For clarity, because Petitioner argues that plain and ordinary meaning is appropriate and because Patent Owner does not dispute that construction, we adopt the plain and ordinary meaning of these claim terms when comparing the challenged claims to the prior art. Other claim terms. It is unnecessary for us to expressly construe other claim terms for purposes of this Decision. See, e.g., Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 10
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Our reviewing court has stated that “[t]wo separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed and, (2) if the reference is not within the field of the inventor's endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (citations and internal quotes omitted). While these two criteria are helpful in many instances, we must not lose sight of the key question at hand: what is “prior art” as that term is used in 35 U.S.C. § 103(a)? References that are “too remote to be treated as ‘prior art’” are excluded from the obviousness analysis. In re Sovish, 769 F.2d 738, 741, 226 (Fed. Cir. 1985). The non-analogous art test provides helpful insight on the underlying question of what is “prior art” within the meaning of the statute; we should not, however, be blind to the reality of the circumstances of the case before us. In re Wood, 599 F.2d 1032, 1036 (CCPA (1979). Nor should we adhere to rigid and mandatory formulas that overly limit the inquiry. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 419 (2007).” slip op. at 20
Patent outcomesUS 8,093,767 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,093,767
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.