- Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentablePTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision
The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther
“According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9
- BurdenNot shown unpatentable
“There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21
- Obviousness (§103) › Analogous artAnalogous artOther
“On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19
Patent outcomesUS 9,421,713 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,421,713 - Hanwha Solutions Corporation v. Maxeon Solar Pte. Ltd.All claims unpatentablePTAB · Feb 24, 2026 · IPR2024-01199 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–20 are unpatentable as obvious over the grounds combining Froitzheim, Gan, and Smith, or Li, Gan, and Smith.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner also states that the Patent Owner “applies the level of ordinary skill in the art Petitioner proposed.” PO Resp. 24. In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’053 patent and the prior art of record, we determine that the definition offered by Petitioner and applied by Patent Owner comports with the qualifications a person would have needed to understand the ’053 patent and the prior art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends that “[t]he claims should be given their plain and ordinary meaning to resolve the issues in this proceeding.” Pet. 17 (citing Ex. 1003 ¶¶ 102–105). Patent Owner states that its Patent Owner Response “adopts petitioner’s proposal to apply the plain and ordinary meaning of the claims.” PO Resp. 24. Accordingly, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundMotivation foundDecided for petitioner
“teaching away. “A reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). And, “teaching away” requires more than the mere expression of a general preference. Galderma Labs., L.P., v. Tolmar, Inc., 737 F.3d 731, 738 (Fed. Cir. 2013). Notably, our reviewing court has determined that a reference can distinguish prior art in order to show the novelty of an invention without teaching away from combining the prior art with the invention disclosed in the reference. See Ricoh Co., Ltd. v. Quanta Computer Inc., 550 F.3d 1325, 1332 (Fed. Cir. 2008). Here, Li prefers a “heterogeneous PN junction” and states that “a PN junction is prepared by a low-temperature deposition method, which avoids a conventional diffusion process at 800–1000°C. Such high-temperature process will cause more defects or contamination in silicon material, which will affect the improvement of cell efficiency.” Ex. 1008, 4. But, Li’s preference for lower temperature diffusion processes does not amount to a teaching away from the broader disclosure. In fact, Li acknowledges that “[t]he silicon thin film can be prepared by any deposition method,” including conventional processes at higher temperatures. Ex. 1008, 4 (emphasis added). And, while Patent Owner asserts that “[d]eposition methods are not relevant to the parties’ dispute, which is over deposition temperature” (Sur-reply 17), the deposition method employed includes its deposition temperature. Thus, just because Li teaches one way of depositing its silicon thin film using a low-temperature deposition method does not mean that Li teaches away from high-temperature processes. Li’s teachings do not discredit or discourage high-temperature processes in a manner that may be said to teach away.” slip op. at 44
Patent outcomesUS 8,878,053 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,878,053 - Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentablePTAB · Jan 28, 2026 · IPR2024-01173 · APJ Susan L C Mitchell · IPR · Final written decision
Claims 1–7, 9–13, and 16–19 are unpatentable: claims 16–17 are anticipated by Lesniak, and the remaining challenged claims are obvious over the stated combinations.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32).” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Level of Ordinary Skill in the Art Petitioner proposes that a person of ordinary skill in the art (“POSA” or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 24 (citing Ex. 1002 ¶¶ 27–28). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications. See generally PO Resp. We adopt and apply Petitioner’s proposed definition of a POSA, which is consistent with the level of skill reflected in the asserted prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner
“Patent Owner asserts that the preamble of independent claim 1 reciting “a deodorant stick” is limiting” as it provides antecedent basis for certain other claim elements, specifically, for the recitation of “said deodorant stick being free of an aluminum salt” and “said deodorant stick” having a particular hardness range. PO Resp. 8–9. Patent Owner also points to dependent claims 5–8 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 10. We agree.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We find that the evidence of record fails to support Patent Owner’s argument that the Lesniak fails to enable a stable deodorant stick. Rather, we are persuaded by Petitioner that Lesniak sufficiently teaches compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 8 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a second wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Ex. 1086 ¶ 7; see also Reply 8 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate a deodorant stick within the parameters of claims 16 and 17. e) Conclusion as to Claims 16 and 17 We agree with Petitioner that “the challenged claims recite nothing more than well-known deodorant ingredients performing their conventional functions.” Pet. Reply 2. Therefore, for the reasons discussed above, we conclude that Petitioner has proved by a preponderance of evidence that Lesniak anticipates claims 16 and 17.” slip op. at 22
Patent outcomesUS 10,905,647 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,905,647 - Canadian Solar Inc. v. Maxeon Solar Pte. Ltd.All claims unpatentablePTAB · Jan 12, 2026 · IPR2024-01040 · APJ Avelyn M Ross · IPR · Final written decision
Claims 9–20 are unpatentable as obvious over the Froitzheim/Gan and Froitzheim/Kwark combinations, with Hartiti or Sivoththaman for the specified dependent claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the discipline of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner contends that “the term ‘in situ’ in dependent claim 15 is appropriate for construction because it is defined in the 053 Patent.” Pet. 20. In particular, Petitioner argues that “in situ” refers to processing that occurs after a single manual loading of the substrate into a furnace or other single chamber or multi-chamber processing tool. EX1003, ¶157. Therefore, in the context of claim 15’s diffusion steps, the single, simultaneous drive-in/diffusion of the front and back dopants would constitute “in situ” steps that satisfy the claim. Pet. 56–57 (citing Ex. 1003 ¶ 157); see Ex. 1001, 5:9–18. Patent Owner argues that “in the parallel district court litigation, [Petitioner] advocates for an additional limitation on what constitutes the claimed ‘in situ.’” PO Resp. 35–36. In particular, Patent Owner asserts that Petitioner urges that “in situ” processing “covers only ‘in situ’ diffusion and not ‘in situ’ doping.” PO Resp. 36. But, Patent Owner states that it applies the construction adopted by Petitioner here. PO Resp. 36 Because the outcome of this Decision does not rest on any particular” slip op. at 9
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Petitioner explains that “Froitzheim and Gan are analogous art because each is in the same field of endeavor—solar cell design” and “[e]ach is reasonably pertinent to the problems of efficiencies and cost-effectiveness of solar cell designs.” Pet. 29 (citing Ex. 1003 ¶94; Ex. 1006, Abstr., ¶¶ 1, 9; Ex. 1007, 245, 249). Petitioner asserts that a person of ordinary skill in the art “would have been motivated to replace Froitzheim’s diffused emitter with a deposited polysilicon emitter along with an oxide layer because Gan taught and suggested that this modification would be an improvement.” Pet. 29 (Ex. 1003 ¶ 95). Gan teaches that “the cell performance can be improved if the diffused-emitter [e.g., of Froitzheim] is replaced with the polysilicon emitter” and that “the J0 [i.e., measure of surface recombination] of the p-type polysilicon emitter (Fig 5) [beneficially] appears to be much lower than what has been previously reported,” which Gan attributes to the thermal oxide interfacial layer. Pet. 29–30 (quoting Ex. 1007, 245, 248); see also Ex. 1007, 249 (“polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells”). Petitioner also argues that the skilled artisan would have had a reasonable expectation of success because the combination is simply” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“reflected in the Gan Thesis, does not defeat obviousness because “obviousness cannot be avoided simply by a showing of some degree of unpredictability in the art so long as there was a reasonable probability of success.” Pfizer, Inc. v. Apotex, Inc., 480 F.3d 1348, 1364 (Fed. Cir. 2007); see also In re Longi, 759 F.2d 887, 896 (Fed. Cir. 1985) (“Only a reasonable expectation of success, not absolute predictability, is necessary for a conclusion of obviousness.”). In addition, “[w]hen prior art contains apparently conflicting references, the Board must weigh each reference for its power to suggest solutions to an artisan of ordinary skill” and, in so doing, “consider the degree to which one reference might accurately discredit another.” In re Young, 927 F.2d 588, 591 (Fed. Cir. 1991). The Gan Thesis describes known techniques that the skilled artisan could have employed to improve thin oxide growth. The Gan Thesis states that “it appears that the variation of the oxide thickness results mainly from the oxide-growth step. If this is the case, it is possible that the thin-oxide growth can be improved by performing the oxidation at a lower temperature such that the oxidation rate can be controlled more precisely.” Ex. 2003, 112. Though Patent Owner characterizes this disclosure as “an unproven assumption” or “speculation at best” (Tr. 32:23–26), Drs. Banerjee and Ruby disagree. For example, Dr. Banerjee explains that [l]owering the temperature slows down the chemical reaction between silicon and oxygen in the formation of silicon oxide and thus allows for greater control on the thickness of the oxide layer. As Gan Thesis shows, the oxide thickness increases with time, and slowing that process down by lowering the temperature allows a Skilled Artisan to optimize the oxygen flow time in order to achieve the desired thickness. Ex. 1082 ¶ 19 (citing Ex. 2003, 111). Dr. Banerjee further testifies that “since at least the 1990s,” the ordinarily skilled artisan was equipped with methods to reliably grown oxide layers with controlled thicknesses. Ex. 1082 ¶ 12. “These methods were able to finely tune conditions such as reaction time, temperature, pressure, and oxygen concentration of the oxidation reaction as it occurs to obtain reliable formation of thin oxide layers.” Ex. 1082 ¶ 12; see id. ¶ 19; Ex. 1048; Ex. 1078. Dr. Ruby, Patent Owner’s declarant, offers similar testimony explaining that prior to 2008, the purported date of invention, it was known that lowering the temperature at which the oxide is formed will slow the growth rate of that oxide. Ex. 1081, 103:3–18. Accordingly, the evidence of record suggests that the skilled artisan, at the time of invention, would have had a reasonable expectation of success in the combination of Froitzheim and Gan.” slip op. at 23
Patent outcomesUS 8,878,053 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,878,053 - PTAB · Nov 6, 2025 · IPR2025-00820 · APJ Neil T Powell · IPR · Institution
The Board instituted IPR on claims 1–11 on all petition grounds, finding a reasonable likelihood that claim 1 would have been obvious over Tadros, Porter, Kalili, and Texin 990R.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). To institute an inter partes review, we must determine that the information presented in the Petition and the Preliminary Response shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that there is a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim. We institute an inter partes review of claims 1–11 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Pet. 17–18 (citing Ex. 1007 ¶¶ 13–15). Patent Owner does not dispute Petitioner’s explanation of the level of skill in the art. See generally Prelim. Resp. At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’090 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Additionally, only terms that are in controversy need to be construed, and these need be construed only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Both parties indicate that no claim terms need to be expressly construed. Pet. 29–30; Prelim. Resp. 5. Consistent with that, we determine that we need not construe any claim terms expressly in order to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing.” slip op. at 8
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Weighing the parties’ arguments and evidence, we find Petitioner’s arguments and evidence sufficient at this stage to demonstrate a reasonable likelihood of prevailing. Pet. 8–17, 30–49. For example, regarding whether of Porter’s disclosure to the problem faced by inventor of the ’090 patent. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 144–164. The ’090 patent illustrates that its inventor faced the problem of selecting desirable materials for an aligner, including selecting a desirable material for an aligner’s hard layer. Ex. 1001, 5:44–59. Petitioner and Dr. Osswald provide significant evidence and reasoning tending to show that Porter’s discussion of Tritan logically would have commended itself to the attention of an inventor facing the problem of selecting an aligner hard layer. Pet. 8 (citing Ex. 1007 ¶¶ 98–108, 125–127, 144–164). For example, Dr. Osswald explains that “because Tritan copolyesters are BPA-free, Rafih specifically discloses Tritan EX401 as an exemplary material” for its oral appliance. Id. ¶ 99 (citing Ex. 1104, 5:4–64, claims 2, 9, 10). In view of this, Dr. Osswald testifies that “Rafih would inform a [person of ordinary skill in the art] that Porter’s guidance regarding replacing polycarbonate with Tritan applies to dental appliances.” Ex. 1007 ¶ 146. At this stage, weighing Petitioner’s evidence against Patent Owner’s contrary attorney argument that Porter focuses on dishware, we determine Petitioner has shown sufficiently that Porter is analogous art. Pet. 8; Ex. 1007 ¶¶ 98–108, 125–127, 144–164; Prelim. Resp. 1, 9–10, 18–21.” slip op. at 11
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,648,090 - PTAB · Nov 6, 2025 · IPR2025-00819 · APJ Kristina M Kalan · IPR · Institution
The Board instituted IPR on all challenged claims based on both obviousness grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“that Petitioner has demonstrated a reasonable likelihood of showing that a person of ordinary skill in the art would have been motivated to combine the teachings of Tadros, Kalili, and Texin 990R to meet the limitations of the claims challenged under this ground.” slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had at least a four-year undergraduate degree in materials science, mechanical engineering, chemical engineering, or a related field and at least two years of experience in the field of polymer science, combined with at least two years of experience in the field of design, manufacture, and processing of thermoformable polymer sheets for use in various applications, such as in orthodontic and dental appliances. Additional education could substitute for professional experience and vice versa. Pet. 18–19 (citing Ex. 1007 ¶¶ 13–15). At this stage, Patent Owner does not dispute Petitioner’s proposal or offer an alternative proposal. See generally Prelim. Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Only claim terms in controversy need be construed. Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”). For purposes of this Decision, we determine that no claim term requires express construction.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“that Petitioner has demonstrated a reasonable likelihood of showing that a person of ordinary skill in the art would have been motivated to combine the teachings of Tadros, Kalili, and Texin 990R to meet the limitations of the claims challenged under this ground. We disagree that Petitioner fails to meet its burden as to the motivation to combine arguments. Petitioner persuasively maps the limitations of the challenged claims to portions of the references relied upon. Pet. 28–38 (claim 1), 38–51. Petitioner also, on this record, provides adequate statements of motivation to combine with a reasonable expectation of success. See, e.g., id. at 34–36 (citing Ex. 1007 ¶¶ 31, 39–42, 147–151, 174–176). The Petition’s reliance on supporting testimony and related corroborating evidence to support the combination does not amount to impermissible hindsight, as that testimony takes into account “knowledge which was within the level of ordinary skill in the art at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure.” In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971). Without further clarification or support from Patent Owner, and in the absence of testimony to support the assertion that a POSITA would not have combined the cited references in the manner proposed with a reasonable expectation of success, we are unpersuaded by Patent Owner’s arguments in this regard.” slip op. at 14
Claim construction§ 103 obviousnesscites KSRPatents in suitUS 11,154,384 - PTAB · Nov 6, 2025 · IPR2025-00818 · APJ Kristina M Kalan · IPR · Institution
The Board instituted IPR on all challenged claims 1–22 based on all three asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority under 35 U.S.C. § 314(a), which provides that inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the briefing and cited evidence of record, we institute inter partes review because we find that Petitioner establishes a reasonable likelihood that it will prevail with respect to at least one of the claims challenged in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time the invention was made. See Graham, 383 U.S. at 17–18. Petitioner proposes that a person of ordinary skill in the art (sometimes referred to herein as a “POSITA”) would have had at least a four-year undergraduate degree in materials science, mechanical engineering, chemical engineering, or a related field and at least two years of experience in the field of polymer science, combined with at least two years of experience in the field of design, manufacture, and processing of thermoformable polymer sheets for use in various applications, such as in orthodontic and dental appliances. Additional education could substitute for professional experience and vice versa. Pet. 18 (citing Ex. 1007 ¶¶ 13–15). At this stage, Patent Owner does not dispute Petitioner’s proposal or offer an alternative proposal. See generally Prelim. Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner argues that no terms require construction, but that “Petitioner applies the prior art consistent with Patent Owner’s assertions in its Infringement Contentions (EX1014, 6-20.).” Pet. 26. Patent Owner does not propose any express claim constructions. Prelim. Resp. 5. Nor does Patent Owner allege that any of Petitioner’s claim interpretations contradict Petitioner’s position in the related district court litigation. Id. Only claim terms in controversy need be construed. Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”). For purposes of this Decision, we determine that no claim term requires express construction.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“that Petitioner has demonstrated a reasonable likelihood of showing that a person of ordinary skill in the art would have been motivated to combine the teachings of Tadros, Kalili, and Texin 990R to meet the limitations of the claims challenged under this ground. We disagree that Petitioner fails to meet its burden as to the motivation to combine arguments. Petitioner persuasively maps the limitations of the challenged claims to portions of the references relied upon. Pet. 27–36 (claim 1), 36–46. Petitioner also, on this record, provides adequate statements of motivation to combine with a reasonable expectation of success. See, e.g., id. at 32–35 (citing Ex. 1007 ¶¶ 31, 39–41, 57–87, 146–150, 171–172). The Petition’s reliance on supporting testimony and related corroborating evidence to support the combination does not amount to impermissible hindsight, as that testimony takes into account “knowledge which was within the level of ordinary skill in the art at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure.” In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971). Without further clarification or support from Patent Owner, and in the absence of testimony to support the assertion that a POSITA would not have combined the cited references in the manner proposed with a reasonable expectation of success, we are unpersuaded by Patent Owner’s arguments in this regard. We also disagree with Patent Owner’s arguments about “adhesive lamination” using “tie layers” at this point in the proceeding. Prelim. Resp. 15–18. On this record, we are persuaded that Petitioner has adequately supported its arguments that one of ordinary skill in the art would have been motivated to use adhesive lamination to achieve the proposed combination. See, e.g., Pet. 33–35; Ex. 1007 ¶¶ 39–42, 120, 45, 51, 116, 120. Petitioner relies on Kalili as disclosing a hard layer suitable for combination with Tadros’s soft layers (Pet. 32), and more particularly, doing so in the context of a laminated multilayer aligner (Reply 4). To create the laminated multilayer aligner proposed, Petitioner’s suggested use of a particular type of well-known lamination, i.e. adhesive lamination, is sufficiently developed and supported in the Petition. Pet. 32–35. Here, Patent Owner recognizes that Kalili teaches lamination, but suggests that it does not specifically teach using adhesive lamination. Prelim. Sur-reply 5. We note, however, that the parties have identified limited types of known lamination for aligners: coextrusion, extrusion lamination, and adhesive lamination. Prelim Sur-reply 4; Pet. 14–15 n.3, 33. In KSR, the Supreme Court explained that when “there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp.” KSR, 550 U.S. at 421. “If this leads to the anticipated success, it is likely the product not of innovation but of ordinary skill and common sense.” Id. Having reviewed Petitioner’s proffered arguments as to Tadros, Kalili, and Texin 990R, including motivation to combine the references asserted in this ground, with a reasonable expectation of success, we are persuaded on this record that Petitioner has met its burden for institution with respect to Ground 1.” slip op. at 14
Claim construction§ 103 obviousnesscites KSRPatents in suitUS 10,973,613 - PTAB · Jul 10, 2025 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board instituted review of claims 1–17 on all asserted grounds, finding a reasonable likelihood of unpatentability on at least one challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we determine that Petitioner establishes a reasonable likelihood of prevailing with respect to the patentability of at least one claim of the ’562 patent. Accordingly, we institute an inter partes review of claims 1–17 of the ’562 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Neither party proposes any explicit construction of any term. See Pet. 7 (“For the purposes of this IPR, the plain meaning of each term can be applied.”). We do not expressly construe any term for purposes of this Decision.” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“On this record, we are persuaded that Petitioner adequately establishes that Usui discloses all of the limitations of claim 1. Usui discloses that aluminum or aluminum alloy layer 15 is in electrical contact with titanium underlayer 13, and titanium nitride layer 14 is located “intermediate the [titanium underlayer] 13 and the aluminum or aluminum alloy layer 15” to prevent “reaction between the aluminum layer 15 and underlayer 13.” Ex. 1004, 3:27–29, 3:38–41, 3:58–63. Usui further discloses that “a capping layer is provided above layer 15,” and that “[p]referred capping layers are titanium nitride and combinations of as layer 18 of a group IVA metal, preferably titanium with a titanium nitride layer 19.” Id. at 3:67–4:6. Usui teaches that titanium nitride layer 19 is about 150 to 800 Å thick, and that the thickness of titanium underlayer 13 is between about 90 to 110 Å. Id. at 3:31–33, 4:6–8. Usui also teaches that the interconnect metallurgy structures described therein “exhibit[] enhanced electromigration characteristics” and “are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.” Id. at 1:8–14. Usui’s description of a plurality of metal layers (layers 13–18) and a capping layer formed over the plurality of metal layers (layer 19), along with its description of the structure’s usefulness for forming electrical connections in an integrated circuit structure, is sufficient, on this record, to establish that Usui discloses “an electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. Usui’s teaching that the capping layer is a refractory metal nitride (titanium nitride) that has a thickness (150–800 Å) greater than the bottommost layer of the plurality of metal layers (layer 13, 90–110 Å), sufficiently establishes, on this record, that Usui discloses the “said capping layer consisting only of a refractory metal nitride, said refractory metal nitride forming a top of said electrical contact and having a thickness greater than that of a bottommost layer of said plurality of metal layers” limitation of claim 1.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,686,562 - Apple Inc. v. THL Holding Company, LLCAll claims unpatentablePTAB · Jul 3, 2025 · IPR2024-00399 · APJ Christopher M Kaiser · IPR · Final written decision
Claims 11–19 are unpatentable as obvious: claims 11–14 over Kalliola, Turunen, Oswald, Vauclair, and Kalayjian; claims 15–18 with Thorn; and claim 19 with Thorn and Sharp.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that the level of ordinary skill in the art corresponds to “a bachelor’s degree in computer science, computer engineering, electrical engineering, or a similar technical field and 2-4 years of experience with wireless ranging and positioning systems, wireless communication devices, and associated computer programming.” Pet. 4 (citing Ex. 1003 ¶ 35). “Patent Owner agrees that this description reasonably represents the level of ordinary skill required to understand and implement the teachings of the ’246 Patent, as well as the prior art cited in the Petition.” PO Resp. 14 (citing Ex. 2002 ¶ 22). Accordingly, we adopt Petitioner’s proposed level of skill.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“device.” This term appears twice in claim 11, once in the phrase “an orientation sensor to detect rotation of the mobile communication device,” and once in the phrase “rotation of the mobile communication device detected by the orientation sensor.” Ex. 1001, 39:13–14, 39:36–38. Patent Owner argues that we should construe this term as limited to “detecting the rotation of the mobile communication device as a whole, not the movement of individual components.” PO Resp. 15–18. Petitioner disputes this, arguing that “rotation of the mobile communication device” should be construed not only to cover rotation of the device as a whole but also should “encompass[] any rotation of the mobile communication device relative to any object, including itself,” which would extend to rotation of “any component of the device.” Reply 4–5. We need not resolve this dispute to determine the outcome of Petitioner’s asserted challenges to the ’246 patent. As discussed more fully below, under either party’s proposed construction of “rotation of the mobile communication device,” Petitioner has shown by a preponderance of the evidence that the challenged claims are unpatentable. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyOther
“On the record developed during trial, we are persuaded that Petitioner has shown by a preponderance of the evidence that Kalliola teaches “an orientation sensor to detect rotation of the mobile communication device,” where “rotation of the mobile communication device” includes rotation of the device as a whole, regardless of whether it also includes rotation of one portion of the device relative to another. Kalliola teaches “motion sensors integrated in WCD 100” that are “used to detect when WCD 100 is being moved,” as well as to detect “when user 110 moves WCD 100 too quickly for an accurate DoA estimation.” Ex. 1004 ¶¶ 84, 86. Although Patent Owner argues that Kalliola’s motion sensors do not detect rotation of the device, this is incorrect on the record as developed at trial. Kalliola teaches that the motion sensor may take “the form of a semiconductor gyroscope chip.” Id. ¶ 84. There is ample evidence that gyroscopes detect rotation. Ex. 1013, 38 (identifying as an “orientation sensor” a “[t]hree-axis gyro” and a “[d]ynamic [h]igh [r]ange [gyro]”); Ex. 1046, 49:18–20 (Dr. Feuerstein testifying that gyroscopes “can be used to detect angular velocity”); Ex. 1047 ¶ 47 (citing Ex. 1051, 170; Ex. 1053, 9) (Dr. Buehrer testifying that a person of ordinary skill in the art “would understand that gyroscopes are well-known inertial sensors that specifically detect rotational motion”). Thus, by a preponderance of the evidence, Petitioner has shown that Kalliola teaches the “orientation sensor to detect rotation of the mobile communication device” of this limitation.” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“whether Kalliola’s teaching of pausing and resuming its DoA estimation based on detected rotational motion, or Kalliola’s teaching of speeding up its DoA estimation based on detected rotational motion, amounts to determining direction based on rotation. Pet. 63–64; PO Resp. 25–27; Reply 24–27; Sur-Reply 11–14. On the record developed during trial, we are persuaded that the preponderance of the evidence supports a finding that Kalliola teaches determining direction based on rotation. First, Kalliola discloses “pausing a DoA estimation until the motion of the WCD is detected by the motion sensors,” then resuming “the updating of the DoA estimation” when motion is detected. Ex. 1004 ¶¶ 14, 84. Second, Kalliola discloses a “correction or compensation mode” that is “employed when user 110 moves WCD 100 too quickly for an accurate DoA estimation,” with this “increase[d] speed of the DoA estimation” being triggered by the “[i]ncreased activity detected by motion sensors in WCD 100.” Id. ¶ 86. As discussed above with respect to limitation 11(d), the detected motion that triggers either of these modes can be rotational motion of the WCD detected by a gyroscope.” slip op. at 22
Patent outcomesUS 11,350,246 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,350,246 - PTAB · Jun 18, 2025 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Institution
The Board instituted IPR on claims 1, 2, 5–7, 9, 16, and 17, finding a reasonable likelihood that claim 1 is anticipated by Boyer.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“approximately two weeks before the statutory deadline for a final written decision, but the most recent median time-to-trial statistics for Judge Gilstrap in the Eastern District of Texas indicate that the actual trial date will likely be in July 2026, which is later than the statutory deadline to issue a final written decision in this proceeding in mid-June 2026. See Ex. 2001, 7 (median time from filing to trial of 23.2 months); Prelim. Resp. 10. Thus, we find this factor is neutral or weighs slightly against discretionary denial.” slip op. at 10
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears to be consistent with the ’713 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 16
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“We note that, as discussed below, we are able to determine whether to institute inter partes review of the ’713 patent without expressly construing the term “from multiple print heads or deposition lines.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). As for Patent Owner’s argument that Petitioner has failed to carry its burden to identify how the claims are to be construed, we disagree on the present record. Although Petitioner does not provide a preferred construction for the single term it proposes requires construction, Petitioner does identify which of its two alternative constructions applies to each of its asserted grounds of unpatentability. Pet. 6 (“Under the first construction, [the obviousness grounds] are applicable, and [the anticipation ground] would be excluded from the claim scope. Under the alternative construction, all of [the asserted grounds] are applicable.”). In our view, this approach does not fail to satisfy Petitioner’s burden under 37 U.S.C. § 42.104(b)(3).” slip op. at 17
Claim construction§ 102 anticipationDiscretionary denialcites PhillipsPatents in suitUS 9,421,713
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.