- Google LLC / Motorola Mobility LLC v. Multifold International Incorporated Pte. Ltd.All claims unpatentablePTAB · Apr 22, 2026 · IPR2025-00060 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1, 2, 4–9, 12–16, and 20 are unpatentable: claims 1, 2, 12, 13, and 20 as anticipated by Ogawa, and claims 4–9 and 14–16 as obvious over the stated combinations.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Claim 1 also recites “wherein the first and second states comprise an open application state.” Given the usage of “comprise” in this clause, we determine that the possible first and second states must include an open application state but the states are not limited to an open application state. Claim 12 similarly recites a processor that is operable to “displaying an icon associated with the application in at least one of the first display and the second display, wherein the icon indicates that the application is in one of two or more states associated with a display status of the application” and “wherein the first and second states comprise an open application state.” Ex. 1001, 16:12–19. Given the usage of “comprise” in these clauses, we determine that the first and second states must include an open application state but are not limited to an open application state that is being displayed in the corresponding display status as argued by Patent Owner. Patent Owner’s proposed construction, which requires the application to be “open and being displayed in the corresponding display condition/status,” further narrows the wherein clauses of claims 1 and 12 which do not require the application to be open and displayed. In fact, Patent Owner’s declarant, Dr. Surati, testified that the applications have multiple states and are not limited to open application states. Ex. 1016, 50:4–51:4. Patent Owner does not cite to an any portion of the Specification or prosecution history in support of its construction. PO Resp. 7–9.” slip op. at 13
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had an undergraduate degree in electrical engineering, computer engineering, computer science or a related field along with two years of work experience in the field of user interface technologies, including e.g., graphical interface technologies, or a related field. . . . More education can supplement practical experience and vice versa. Pet. 5–6 (citing Ex. 1002 ¶¶ 20–21). Patent Owner applies Petitioner’s definition of a person of ordinary skill in the art. PO Resp. 10. We apply Petitioner’s uncontested definition because it appears consistent with the problems addressed in the ’080 patent and the prior art.” slip op. at 10
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“For the following reasons, we find that Petitioner establishes that Ogawa discloses this limitation. Patent Owner’s contentions are not responsive to Petitioner’s mapping of Ogawa to claim limitation [1.f]. This claim limitation recites that “the morphing comprising changing the shape and size of the icon.” Ex. 1001, 15:4–7. Petitioner relies on the size and shape of access bar 42 changing as shown by a comparison of Ogawa’s Figure 4(B) and Figure 4(C). Pet. 24– 25. Patent Owner does not dispute that the size and shape of access bar 42 changes from Figure 4(B) to Figure 4(C). See PO Resp. 10–16. Patent Owner focuses on the color of access bar 42 shown as cross- hatching in Figure 4 to argue that the icon does not represent the state of the application. PO Resp. 12–14. However, the color of access bar 42 and the size and shape of access bar 42 are set independently of each other by different functions. Ogawa explains that: [t]he splitting position of the screen is indicated by a pointer 44. When the pointer 44 is designated with the pen 12 and the pen is moved left or right (along the access bar 42), the splitting ratio (horizontal size ratio) of the two screens 13A, 13B changes as depicted in FIG. 4(C). Ex. 1005 ¶ 19.” slip op. at 29
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Petitioner next contends that it would have been obvious to an ordinarily skilled artisan to modify “Ogawa’s display control method using Yook’s technique such that Ogawa’s method would have included first displaying a program across both logically divided displays of display input surface 13 . . . to increase the viewing area for the program as shown and described [in] Yook’s figures 4b and 4d.” Pet. 54–55 (citing Ex. 1002 ¶ 137). Petitioner further contends that the modification would “include[] minimizing the program to occupy only one of the first and second parts of display input surface 13 . . . as also shown and described with reference to Yook’s figures 4b and 4d.” Id. at 55. Petitioner then provides an example of the modification. Id. Namely, Ogawa’s operation would have been modified so that “when a user elects to split a screen in figure 4(A) using the split screen menu 41, the program is first displayed like in figure 4(C) . . . across two displays and then, based on user input to minimize the program size” resulting in the program displayed on one display. Id. (citing Ex. 1002 ¶ 137; Ex. 1005, Figs. 4(A)–4(C)). Petitioner next contends that the modification of Ogawa with Yook “would have involved the substitution of one known way of displaying a program” as shown in Ogawa “with another known display method” as shown in Yook, “and thus would yield a predictable result.” Pet. 56–57 (citing Ex. 1002 ¶ 139). Patent Owner does not address claim 4. See PO Resp. 10–18. We have reviewed Petitioner’s evidence and argument and find that Petitioner has shown that an ordinarily skilled artisan would have been motivated to combine Ogawa and Yook as a simple substitution of one known way of displaying a program for another with a predictable result. Ex. 1002 ¶ 139. Further, Petitioner has also shown that the combination of Ogawa and Yook teaches the limitations of claim 4. For the foregoing reasons, Petitioner establishes by a preponderance” slip op. at 43
Patent outcomesUS 8,842,080 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,842,080 - Apple Inc. / Samsung Electronics Co., Ltd. et al. v. Smart Mobile Technologies LLCAll claims unpatentablePTAB · Apr 22, 2026 · IPR2022-01002 · APJ Jameson Lee · IPR · Remand
On remand, claims 1–9 and 12–20 are unpatentable as obvious over Paulraj and Heath under § 103.
RulingsRemand decision- RemandOther
“determining no challenged claim had been proved unpatentable by Samsung Electronics Co., Ltd., Samsung Electronics America, Inc., and Apple Inc. (collectively, “Petitioner”). Paper 41. Petitioner appealed to the U.S. Court of Appeals for the Federal Circuit. Papers 43, 44. On January 13, 2026, the Federal Circuit vacated and remanded, on the basis that the Board erred by not considering certain alternative arguments presented in the Petitioner’s Reply (Paper 29), which were properly responsive to claim construction proposed in the Patent Owner Response and adopted by the Board.1 Paper 45. In its Reply, Petitioner alternatively argued that even under the Patent Owner’s claim construction relating to “the plurality of antennas,” the same prior art references nonetheless still rendered obvious the challenged claims. In this remand proceeding, neither party requested the filing of additional briefing, despite having been given an opportunity to make and explain such a request. Paper 51. We have authority to conduct this inter partes review under 35 U.S.C. § 6. This Final Written Decision on Remand is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73. Having considered all of the arguments presented in Petitioner’s Reply, we determine that Petitioner has proved by a preponderance of the evidence that claims 1–9 and 12–20 of U.S. Patent No. 9,191,083 B1 (Ex. 1001, “the ’083 patent”) are unpatentable. A.” slip op. at 2
- Skill levelSkill level board ownDecided for petitioner
“Bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and at least two years of experience related to the design or development of wireless communication systems, or the equivalent.” Pet. 2–3 (citing Ex. 1003 ¶¶ 27–28). Petitioner additionally states that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Pet. 3. Patent Owner does not in its Response address the level of ordinary skill. Patent Owner’s expert witness, Dr. Cooklev, testifies that he “will apply the same definition of the level of skill of a POSITA [as Petitioner].” Ex. 2004 ¶ 19. Based on the evidence of record, we determine a person of ordinary skill would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and two years of experience related to the design or development of wireless communication systems. This is consistent with Petitioner’s articulation of the level of ordinary skill, with the exception of Petitioner’s open-ended reference to “at least” two years of experience, because that would improperly encompass a level of experience only possessed by an expert. This articulation of the level of ordinary skill is also the same as what we determined in the Final Written decision issued on November 30, 2023. Paper 41, 6. C. slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Patent Owner contends: “The plain meaning of the claims requires that the same ‘plurality of antennas’ be used for transmitting and receiving the plurality of signal streams.” PO Resp. 5, 9–12. Citing Dr. Cooklev’s testimony, Patent Owner contends that the ’083 patent’s Specification describes embodiments that use the same antennas for both transmitting and receiving data streams. PO Resp. 7–9 (citing Ex. 2004 ¶¶ 34–35). In the Final Written Decision, we determined: Although we do not understand the claims to require both transmission and reception “via all antennas” all of the time, we determine the claims require a set of antennas in which at least some of the antennas are for both transmitting and receiving. We disagree with Petitioner that two separate sets of antennas— one set of transmitting antennas and a separate, nonoverlapping set of receiving antennas—fall within the scope of the challenged claims. Paper 41, 13 (emphasis added). The Federal Circuit agreed with our claim construction. Apple Inc. v. Smart Mobile Technologies LLC, U.S. Ct. App. Fed. Cir., slip op. 24-1419 (January 13, 2026) (2026 WL 91021) (Paper 45, 2–4). We continue to apply the same construction here that we adopted in the Final Written Decision.” slip op. at 9
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“legally sufficient motivation for modifying Paulraj, but only attempted to show that the modification “could” have been made by one of ordinary skill in the art which is not enough for a showing of obviousness. Sur-reply 8–9. We disagree with Patent Owner. Establishing that certain technique was well-known to one of ordinary skill in the art at the effective filing date of the challenged patent constitutes sufficient motivation to make a modification in accordance with what was well-known in the art to one of ordinary skill, absent factors not present here. Indeed, “if a technique has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way, using the technique is obvious unless its actual application is beyond his or her skill.” KSR, 550 U.S. at 417. That would be the situation where a technique was well-known to one of ordinary skill in the art, unless there is actual difficulty in making the application. The “improvement” here, although not articulated by Petitioner, is inherent with the technique, not requiring use of separate antennas for transmitting and receiving, i.e., eliminating the need for additional parts. Further, it is not necessary to show that a modification is the “best option,” because any “suitable option” would suffice. See Intel Corporation v. Qualcomm Incorporated, 21 F.4th 784, 800 (Fed. Cir. 2021). Here, Patent Owner does not assert that one of ordinary skill in the art would have had difficulty modifying Paulraj to use some of the same antennas both for transmitting and for receiving. Nor does Patent Owner dispute that it was well known to one of ordinary skill in the art to use the same antenna(s) for both transmitting and for receiving. We further note the following description in the Specification of the ’083 patent: “The typical CT/MD [cellular telephone/mobile device] has one transmitter and one receiver (T/R), with one antenna.” Ex. 1001, 1:47–48. That statement is fully consistent with Petitioner’s assertion that it was well-known to use the same antenna for transmitting and for receiving. For the foregoing reasons, notwithstanding Patent Owner’s arguments to the contrary, we determine that Petitioner sufficiently has shown that it would have been obvious to one of ordinary skill in the art to modify Paulraj such that some of the same antennas would be used both for transmitting and for receiving, according to limitations 1[b], 1[d], and 1[e].” slip op. at 36
Patent outcomesUS 9,191,083 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,191,083 - CMS Cepcor Ltd. / CMS Cepcor Americas LLC v. Sandvik Intellectual Property ABNo claims unpatentablePTAB · Apr 16, 2026 · IPR2024-01381 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1–14 were not shown unpatentable because Polinski and Piepho do not teach the claimed tapered region extending from the shaft’s second end, and Petitioner did not establish adequate motivation to combine.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for patent owner
“Petitioner argues that a person of ordinary skill in the art (“POSITA”) relating to the ’090 patent would have had “a bachelor’s degree in mechanical engineering or a related field, and at least 2 years of experience with industrial equipment design and development.” Pet. 3 (citing Ex. 1002 ¶ 29). Petitioner further contends that one of ordinary skill “may also have a combination of more formal education and less work experience or a combination of less/different formal education and more work experience.” Id. In the Patent Owner Response, Patent Owner states that it “does not object to the defined level of skill in the art.” PO Resp. 12 (citing Pet. 3). appears consistent with the problems addressed in the ’090 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“challenge, the crux of the parties’ dispute revolves around the limitation in claim 1 of “an axial region of the shaft body extending from the second end and being tapered relative to a longitudinal axis of the shaft.” We agree with for the tapered axial region and that starting point would be the extremity of the shaft not an undefined point in the “end region.” Because Patent Owner proposes a construction of “end” that would have general application to all claim terms including the first end of the shaft, the second end of the shaft, and the sleeve end, and that construction has no bearing on the issues we address below, we do not reach Patent Owner’s proposed general construction of “end” by itself. We determine that no other claim terms require express construction for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 17
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“As discussed above in our claim construction analysis, apart from the issue of the general construction of “end,” we determine that this limitation uppermost extremity of the shaft. Because neither Polinski nor Piepho disclose a tapered axial region starting at the uppermost extremity of the shaft, we find that Petitioner has not shown that the combination of Polinksi and Piepho discloses this limitation.” slip op. at 25
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundDecided for patent owner
“This paragraph discusses “accurate alignment” in connection with joint 21, not tapered end 25. Ex. 1018, 3:23–35. The paragraph subsequently states that both joint 21 and end 25 are tapered but that shaft end 25 may alternatively be cylindrical. Id. We also find nothing in this paragraph supporting Petitioner’s assertion that alignment “is notoriously more difficult with purely cylindrical shafting” (Pet. 16–17). In order to support its position, Petitioner improperly conflates separate statements in this paragraph of Piepho, i.e., joint 21 provides accurate alignment, joint 21 is tapered, and end 25 is tapered. Petitioner makes an unsupported logical leap that the result of these three statements is that tapered end 25 provides accurate alignment. However, Petitioner fails to reconcile this argument with the final sentence in this paragraph that shaft end 25 may also be cylindrical as shown in Figure 4. Figure 4 “is an external view of another embodiment of” Piepho’s shaft. Ex. 1018, 2:49–50. In Figure 4, joint 21 has the same tapered configuration as shown in Figure 3 but end 25 is not tapered. Based on our review of Piepho’s Figures 3 and 4, we find that Piepho’s reference to “accurate alignment” refers to joint 21 and not to tapered end 25 as Petitioner alleges. Because Mr. Smith’s testimony (Ex. 1002, 59) essentially parrots the Petition on this point and is inconsistent with our finding, his testimony is entitled to little, if any, weight. For the foregoing reasons, we find that Petitioner has not established that a person of ordinary skill in the art would have been motivated to would teach this claim limitation.8 Because Petitioner has not shown that the combination of Polinski and Piepho teaches limitation 1b or an adequate motivation to combine, Petitioner has not shown by a preponderance of the evidence that claim 1 is obvious over Polinski, Piepho, and Harless.” slip op. at 27
Patent outcomesUS 11,014,090 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,014,090 - PTAB · Apr 15, 2026 · IPR2025-00102 · APJ Cynthia M Hardman · IPR · Institution
The Board instituted review of claims 1–10 on both obviousness grounds, finding a reasonable likelihood that Petitioners would prevail.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have authority under 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons explained below, we institute an inter partes review of claims 1–10 of the ’121 patent on all challenges in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time the invention was made. See Graham, 383 U.S. at 17–18. Petitioners contend that a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”) would have had: at least a bachelor’s degree in electrical engineering, computer engineering, or computer science, and two years of experience in the field consumer electronics, with exposure to digital camera technology and wireless communications. Superior education could compensate for a deficiency in work experience, and vice-versa. Pet. 6 (citations omitted) (citing Ex. 1030 (Lett Decl.) ¶¶ 94–95). Because Petitioners’ proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioners assert that no express constructions are required to institute review and find the challenged claims unpatentable. See Pet. 7. We find it unnecessary to construe any claim term to decide whether Petitioners satisfy the “reasonable likelihood” standard for instituting trial. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Any final written decision entered in this case may include express claim constructions, or may include discussion of claim scope that differs from that provided in our analysis in this Decision. Any final claim constructions will be based on the full trial record.” slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“E. Ground 1 – Alleged Obviousness Over Hiroishi, Kahn, Endsley, and Bluetooth Petitioners assert that claims 1–10 are unpatentable as obvious over the combination of Hiroishi, Kahn, Endsley, and Bluetooth. Pet. 16–65. After considering Petitioners’ arguments and cited evidence, we find that for purposes of institution, Petitioners have shown a reasonable likelihood of establishing that claims 1–10 are unpatentable as obvious over the combination of Hiroishi, Kahn, Endsley, and Bluetooth.” slip op. at 21
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,234,121 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Expert testimonyPatent owner expert creditedDecided for patent owner
“gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00006 · APJ Debra L Dennett · IPR · Final written decision
Claims 1–17 are unpatentable under § 103, principally over Chang and Jin; the Board rejected the Jin and Feldmann combinations for lack of a reason to combine.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 26. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 116 with Pet. 26). Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” See Magnum, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32
Patent outcomesUS 10,230,009 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,230,009 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00918 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under § 103 over Chang and Jin; the Board rejected the Jin and Feldmann based grounds for lack of a reason to combine without hindsight.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable
“base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” PO Resp. 42–43 (citing Ex. 1013 ¶ 76). But, in so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Ex. 1013 ¶ 62; Tr. 15:20– 17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 70–81, 91–96, 200 (citing Ex. 1026 § 1 and stating that “[b]oth Chang and Jin likewise teach backside isolation regions”). Chang also discloses that the emitter area may be formed by “thermal diffusion, ion implantation or the like.” Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Pet. Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding the second tunneling layer and a base surface field area from periphery region and isolation portion. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art “reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” Ex. 1003 ¶ 201.” slip op. at 33
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentablePTAB · Apr 15, 2026 · IPR2025-00007 · APJ Avelyn M Ross · IPR · Final written decision
Claims 1–11 are unpatentable under §103 over Chang and Jin because the combination teaches the claimed isolation portion and the claimed tapering.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49). Patent Owner does not address the level of ordinary skill in the art. See generally PO Resp; Sur-reply. In light of the complete trial record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’104 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’104 patent and the prior art.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 23. And, Patent Owner does not address claim construction. See generally PO Resp. As neither party proposes an express construction for our consideration and because we determine that an express claim construction is not necessary for us to render a decision in this matter, we do not construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightTeaching away not foundNot shown unpatentable
“On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 16
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 25. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 113, with Pet. 25. Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” Magnum Oil, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 113 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide.” slip op. at 18
Patent outcomesUS 9,722,104 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,722,104 - PTAB · Apr 15, 2026 · IPR2025-00104 · APJ Michael A Valek · IPR · Institution
The Board instituted IPR on claims 1, 2, 4–7, and 9–18 based on all presented grounds, finding a reasonable likelihood of success on obviousness grounds 1A and 1B.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). The petitioner ultimately bears the burden of persuasion to prove unpatentability of each challenged claim by a preponderance of the evidence. 35 U.S.C. § 316(e). This burden never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). The Board may authorize an inter partes review if we determine that the information presented in the Petition shows a reasonable likelihood that the petitioner will prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314(a).” slip op. at 9
- Skill levelSkill level petitioner adoptedDecided for petitioner
“(“POSITA”) would have “had at least a bachelor’s degree in electrical engineering, computer engineering, or computer science, and two years of experience in the field [of] consumer electronics, with exposure to digital camera technology and wireless communications.” Pet. 5 (citing Ex. 1030 ¶¶ 94–95).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We find it unnecessary to construe any claim term to decide whether Petitioners satisfy the “reasonable likelihood” standard for instituting trial. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains. 35 U.S.C. § 103; see also KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) when in evidence, objective evidence of nonobviousness.10 Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966). An obviousness determination requires finding a reason to combine accompanied by a reasonable expectation of achieving what is claimed in the challenged patent. See Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). “[A]ny need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed.” KSR, 550 U.S. at 419–20.” slip op. at 10
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 8,904,030 - Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentablePTAB · Apr 7, 2026 · IPR2025-00156 · APJ Timothy G Majors · IPR · Final written decision
Claims 1–9 are unpatentable as obvious over Schaffer combined with Hartley or Eller, with or without Garrison; anticipation by Schaffer and obviousness over Schaffer alone were not shown.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“The parties propose essentially the same formal educational background for the POSA, but we agree with Patent Owner that Petitioner’s proposed POSA definition lacks some specificity concerning the POSA’s work experience. That definition, if interpreted generically, could mean that a person qualifies as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience with any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2008 ¶ 76. 10 Although unspecified in this proceeding, in the related 1157 IPR, Patent Owner stated that the field of the invention is “hemostasis valves for use during intravascular procedures.” IPR2024-01157, Paper 13 at 22. engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:24–60 (background of the invention). Such devices include, but are not necessarily limited to, hemostasis valves and catheters for minimally-invasive vascular surgeries. Id. Furthermore, as pointed out by Petitioner and consistent with the testimony of the parties’ experts, the POSA need not have had firsthand experience designing relevant medical devices, including hemostasis valves. Pet. Reply 28; see, e.g., Ex. 1019 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required); Ex. 2006 (Thornton Tr.), 180:13–19. As Dr. Zalesky testified, the POSA’s experience related to such devices “could be as simple as bench testing and looking at clinical data.” Ex. 1019, 74:5–75:1; see also id. at 82:3–6 (testifying a POSA need not “have specific experience with different methodologies of hemostasis”). Lastly, a POSA would have had an understanding of such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience and/or study. Ex. 2006, 24:5–21.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“1. “aspiration catheter” Claim 1’s preamble recites “[a]n aspiration catheter.” Ex. 1001, 22:10. Petitioner contends that, as a general rule, a preamble does not limit the scope of a claim, and that the term “aspiration” here merely describes a non-limiting “intended use” of an otherwise structurally-complete invention defined by the body of the claim. Pet. 18–19. Patent Owner responds that 11 In the related 1157 IPR, Patent Owner moved to exclude Mr. Thornton’s testimony, which motion we denied. IPR2024-01157, Paper 35 at 70–72. Patent Owner filed no motion to exclude here. Owner’s arguments here.” PO Resp. 30. We need not further construe “aspiration catheter” as no dispute turns on that term’s meaning or whether it is limiting. Realtime Data, 912 F.3d at 1375 (explaining that claims need only be construed to the extent necessary to resolve matters in dispute).” slip op. at 15
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“That does not, however, resolve the dispute about “flexibility.” On that issue, after considering the full record developed through trial, we agree with Patent Owner that a “filament” as claimed is flexible. The claims support Patent Owner’s interpretation. Patent Owner cites the claim language, including the recitation that “the first filament [is] formed into a loop around the collapsible tubular sidewall defining a valve lumen” and that “a diameter of the valve lumen decreases in response to reducing a diameter of the loop.” As Patent Owner argues, and as we recognized at the institution stage, the claimed filament “must be flexible to constrict the valve lumen.” PO Resp. 23; Inst. Dec. 15–16; Ex. 2008 ¶ 68 (testifying that a POSA would understand this property of flexibility is essential to achieving the claimed loop formation and function). The Specification supports this understanding. Consider the “loop” embodiments as illustrated in Figures 6 or 7. Ex. 1001, Figs. 6–7. If the filament forming each depicted loop was somehow rigid, applying a force that seeks to pull the respective ends of the filament in opposing directions would not decrease the size of the loop—the loop would stay the same size and the filament would not circumferentially constrict and seal the elongate member’s lumen as described in the patent. Ex. 1001, 13:18–29.” slip op. at 18
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Petitioner’s argument is unavailing. A steel beam or a plastic broom handle are longer than they are wide and yet conventionally rigid. And, specific to the subject matter here, as Mr. Thornton admits, machining the valve’s actuating members from plastic or metal, which Schaffer actually describes, would produce rigid members. Ex. 2005, 168:2–6; see also Ex. 2006, 152:8–10 (testifying a flexible aluminum wire would not be made from machining aluminum). Moreover, considering Schaffer’s cited drawings— Figure 32, in particular—does not show the actuating members changing shape or dynamically conforming to the outer surface of the seal module that those members are compressing, which, had that been shown, might indicate flexibility. Maybe the absence of any dynamic conformance of the surface of the actuating members is an unintended limitation or artifact of the drawing. Or maybe not, and what is shown is a rigid structure consistent with Schaffer’s other disclosures as already explained. We decline to find anticipation where Schaffer does not, with sufficient clarity and detail, describe a valve with a “filament” as claimed.21 Ultimately, on whether Schaffer describes rigid or flexible U-shaped actuating members, Dr. Zalesky’s interpretation of the reference is more plausible and we find greater evidentiary support for Patent Owner’s position on this issue. Notwithstanding Mr. Thornton’s testimony in his rebuttal declaration that a POSA reading Schaffer would have understood 21 Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1284 (Fed. Cir. 2017) (“Anticipation requires that a single reference describe the claimed invention with sufficient precision and detail to establish that the subject matter existed in the prior art.”) (emphasis added and internal quotation marks omitted). testimony on cross-examination was equivocal—he admitted “[i]t’s not clear” whether Schaffer’s U-shaped actuating members are flexible or rigid. Ex. 2006, 115:16–23 (testifying “[t]he material properties of the U-shaped actuating members are not clearly defined in the Shafer [sic] application”). Dr. Zalesky, in contrast, has consistently testified that a POSA would have understood that Schaffer describes rigid actuating members. See, e.g., Ex. 2008 ¶¶ 66–74 (citing, inter alia, Schaffer’s illustrations of the valve in operation, and the disclosed manufacturing and assembly methods as indicating that “the actuating members 55 are rigid rather than flexible”).” slip op. at 40
Patent outcomesUS 11,697,012 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,697,012
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.