• Rocket Media, LLC D/B/A Launch Labs v. Fullthrottle Technologies, LLCInstitution denied
  PTAB · Jun 2, 2025 · IPR2025-00149 · APJ Arthur M Peslak · IPR · Institution

  The Board denied institution on claims 1–36 because Petitioner did not show a reasonable likelihood that either asserted obviousness combination rendered them unpatentable.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Conclusion – Claim 1 For the foregoing reasons, Petitioner does not establish a reasonable likelihood that claim 1 would have been obvious over Doughty, van Boucq, and Smith.” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “column 3, lines 40–45 and column 4, lines 32–43. Pet. 34. At column 3, Smith discusses in general terms that a roadside billboard “may be viewed as effective (or at least more effective) where analytics data indicates a large number [of] user[] visits to a website advertised by the billboard, and the users are in close proximity to the billboard at or near the time of initiating the website visit.” Ex. 1032, 3:40–45. Likewise, at column 4, Smith further discloses using analytics data to assess the effectiveness of a promotion at a geographic location. Id. at 4:32–43. The cited portions of Smith, thus, disclose processing data from a large number of users to judge the effectiveness of the overall campaign. Petitioner does not direct us to any disclosure in Smith that the effectiveness processing module uses a specific action taken by a specific user, as taught by the ’219 patent, in determining that a particular browser session was initiated by a user with an intent to visit the URL.” slip op. at 19

  • Expert testimonyPetitioner expert discountedOther

    “is my opinion that Smith discloses determining whether the user initiated a browser session with an intent to visit the website based upon how close the user’s location is to an ad,” and “[i]n my opinion a [person of ordinary skill in the art] would have understood that Smith discloses determining that a URL, such as a URL on the billboard.” Ex. 1007 ¶ 265. Mr. Williams’s opinion testimony that Smith discloses “determining” the intent of a specific user is conclusory because it is not supported by the cited disclosure of Smith or any other evidence. See id. His testimony on this point is, thus, entitled to little, if any, weight. Xerox Corp. v. Bytemark, Inc., IPR2022- 00624, Paper 9, 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 19

  • Skill levelSkill level petitioner adoptedOther

    “Petitioner asserts a person having ordinary skill in the art on the priority date of the ’219 patent: would have been an individual with either (1) at least a bachelor’s degree in computer science, computer engineering, electrical engineering, or an equivalent field plus at least one year of experience working on computer networking, or (2) at least 3 without a formal degree. Pet. 13. Patent Owner does not contest Petitioner’s definition. See Prelim. Resp. 21. For the purposes of this Decision, we apply Petitioner’s uncontested” slip op. at 9

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,823,219
• DBR Finance, Inc. v. Rugged Cross Hunting Blinds, LLCNo claims unpatentable
  PTAB · May 29, 2025 · IPR2024-00291 · APJ Cynthia L Murphy · IPR · Final written decision

  The Board held claims 1–19 not unpatentable because Petitioner did not prove the proposed Whybrew–Strength combinations disclosed the claimed mesh panels with spaced holes.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We question, therefore, whether someone having an education in textile engineering or physics, but no experience in the field of hunting blinds, would be consistent with the level of skill portrayed by the ’535 Patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note that Petitioner’s expert’s experience, education, and qualifications are rooted in textiles, fibers and physics, and sophisticated subjects related thereto. See Ex. 1007 ¶¶ 14–20. But his deposition revealed that he has little or no experience in the field of hunting blinds. See Ex. 2038, 8–14.5 5 The same might be said of Patent Owner’s expert. See Ex. 2031, ¶¶ 6–7; Ex. 1023, 16. However, our obviousness analysis leaned lightly, if at all, on her declarations and testimony.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “1. Mesh Material In the Petition, Petitioner asks that “the term ‘mesh material’” be interpreted in accordance with “a plain and ordinary usage.” Pet. 25. Per Petitioner, the “plain and ordinary” meaning of the term “mesh material” is “a woven material of open texture with spaced holes therein.” Id. Per Petitioner, “[o]ther typical terms used to describe a mesh-like material” are “a screen material, or a netting material, which are believed to be synonyms.” Id. Patent Owner does not dispute that a mesh material would have an open texture with spaced holes therein. See PO Resp. 18. We find that Petitioner’s proposed construction aligns with the ’535 Patent’s specification. See Ex. 1001. The drawings in the ’535 Patent depict the mesh material 26 as having an array of uniformly spaced circular holes forming a net-like structure (see id., Fig. 1A, 1B, 4, 9) or an array of uniformly spaced rectangular openings (see id. Fig. 8) forming a screen-like structure. The embodiments of the mesh material 26 listed in the ’535 Patent (e.g., a mesh banner material, scrims, a network of fibers, etc.) are materials having net-like or screen-like structures. See id. at 6:47–7:28.6” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Our construction aligns with the claim language; Petitioner’s proposed construction does not. See Ex. 1001, 10:4–19. The independent challenged claims set forth “one or more panels of mesh material” and then set forth “said one or more panels comprising: a first side with a camouflage pattern; and a second side with a dark color coating.” Id. at 10:4–11. The recited “said one or more panels” corresponds to the previously recited “one or more panels of mesh material,” not panels comprising a material that was only a “mesh” prior to printing/coating. See id. Also, the independent challenged claims set forth that “the one or more panels of the mesh material define an outer surface of the camouflage structure.” See id. at 10:18–19, 1:23–24 (emphasis added). And the panel(s) defining a hunting blind’s outer surface would include the dark color coating. Our construction aligns with the ’535 Patent’s specification; Petitioner’s proposed construction does not. See Ex. 1001. The ’535 Patent repeatedly describes the relevant panel material in the hunting blind (i.e., post printing/coating) as a mesh material. See id., Abst., 1:19–5:34, 6:47–7:28, 9:16–54, Figs. 1A, 1B, 9. The ’535 Patent expressly describes and depicts the mesh material 26 as including the camouflage pattern and the dark-color coating. See id. at 1:52–56, 3:24–25, 3:31–33, Figs. 1A, 1B. The ’535 Patent says that “panels” of this coated mesh material 26 “are used to form” a hunting blind. Id. at 3:22–26. The ’535 Patent says that “[m]esh material is presented for a hunting blind with a camouflage pattern printed on a first side and a second side with a color coating.” Id. at Abst. The ’535 Patent says that “mesh material of interwoven fabric is provided for a hunting blind including a camouflage pattern printed on a first side and a second side with a dark color coating.” Id. at 1:19–22; see also id. at 1:44–49. Our construction aligns with the ’535 Patent’s prosecution history; Petitioner’s proposed construction does not. See Ex. 1006. As mentioned above, throughout prosecution of the ’535 Patent, the same prior art material was mapped to the claimed panel(s) of mesh material. See Ex. 1006, 64–72, 122–106. The mapped-to prior art mesh material was described during prosecution as an “interwoven fabric” with “a pattern” printed on a first side and “a dark color coating” on a second side. Ex. 1006, 64; see also id. at 122. And the mapped-to prior art mesh material (i.e., which included not only the interwoven fabric but also the printed pattern and the dark color coating) had a “net-like structure” with an array of uniformly spaced “net holes” that are “not closed.” Ex. 2021, 4:1–5, see also id. at 2:58–3:6, 4:34–45, Figs. 1, 2a. Thus, we understand that claimed panel(s) of mesh material must have” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “However, Patent Owner does not bear the burden of proving Strength’s camouflage material 10 does not have holes. Rather, Petitioner bears the burden of proving that Strength’s camouflage material 10 does have holes. And Petitioner’s arguments that undermine Patent Owner’s position that Strength’s camouflage material 10 does not have holes, concurrently undermine Petitioner’s position that Strength’s camouflage material 10 does have holes. Per Petitioner, “Strength is silent on whether visible holes exist in the fabric” (Pet. Reply 8) and “the Strength reference doesn’t discuss anything about holes” (Tr. 14). Petitioner’s expert testified that it was his “understanding that Strength is silent” on “whether or not there are holes.” Ex. 2038, 44. Petitioner contends that Strength’s silence about the presence/ absence of holes hinders Patent Owner from proving that Strength’s camouflage material 10 does not have holes. See Pet. Reply 8. We agree. But this same silence likewise hinders Petitioner from proving that Strength’s camouflage material 10 does have holes.” slip op. at 35

  Patent outcomesUS 11,399,535 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,399,535
• Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentable
  PTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9

  • Strike new argumentNew argument consideredDecided for patent owner

    “argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12

  Patent outcomesUS 8,529,321 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 8,529,321
• Cooler Master Co., Ltd. v. Asetek Danmark A/SInstitution denied
  PTAB · May 8, 2025 · IPR2024-01497 · APJ Kevin W Cherry · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–7 would have been obvious over Duan and Duan-I.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “A patent claim is unpatentable under 35 U.S.C. § 103(a) if the differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) when in evidence, objective evidence of nonobviousness.3 Graham v. John Deere Co., 383 U.S. 1, 17– 18 (1966). “In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is 2 The Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), amended 35 U.S.C. § 103. The ’681 patent claims benefit of a May 6, 2005, filing date, which is before the effective date of the applicable AIA amendments. Ex. 1001, Code [63]. 3 Patent Owner does not present arguments or evidence of secondary considerations in its Preliminary Response. Therefore, secondary considerations do not constitute part of our analysis herein. unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review).” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Relying on the declaration testimony of Dr. Abraham, Petitioner contends that an ordinarily skilled artisan for the ’681 patent “would have been knowledgeable regarding liquid cooling systems for computer systems, would have earned at least a bachelor’s degree, such as an B.S. (bachelor of science), or equivalent thereof, in electrical or mechanical engineering or a closely-related field, and would have possessed at least two or three years of experience in liquid cooling systems for computer systems, or in similar systems.” Pet. 17. Petitioner additionally contends a “person with less education but more relevant practical experience, depending on the nature of that experience and degree of exposure to liquid cooling systems for computer systems, could also qualify as a POSITA in the field of the ’681 patent.” Id. (citing Ex. 1005 ¶ 42). Patent Owner does not address the level of skill of the ordinary artisan. See generally Prelim. Resp. Based on this record, we adopt Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the ’681 patent and the asserted prior art, and we apply it in our obviousness evaluations below. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art, itself, can reflect appropriate level of ordinary skill in art).” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner “does not believe any specific terms require construction and applies the plain meaning of all claim terms herein.” Pet. 18. Patent Owner does not address claim construction. See generally Prelim. Resp. Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “motivated to combine Duan and Duan-I in this manner, Petitioner argues that “given the known ‘compact trend of computer[s]’ recognized by Duan [], a POSITA would have been motivated to rotate Duan’s liquid driving module 2 (pump) counterclockwise by 90 degrees in Figure 7 to reduce the systems overall height in view of Duan-I.” Pet. 26 (citing Ex. 1007 ¶ 6; Ex. 1005 ¶ 57). Petitioner asserts that “[a]lthough modifying Duan in this fashion would require some minor reconstruction, doing so would reasonably be expected to result in success.” Id. Petitioner contends that “[t]he modification is well within a POSITA’s technical grasp, and would have predictably resulted in a modified system like the one [reproduced] below (double-sided chassis outlined in red).” Id. at 26–27. Petitioner provides the following graphical explanation, reproduced below, of how it arrives at this modified figure.” slip op. at 23

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,733,681
• Bombardier Recreational Products Inc. v. MHL Custom, Inc.Instituted
  PTAB · Apr 28, 2025 · IPR2024-01391 · APJ Barry L Grossman · IPR · Institution

  The Board instituted review of claims 16–23 and 26–28 on all asserted grounds, finding a reasonable likelihood that Petitioner would prevail on at least one challenged claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). The Board determines whether to institute a trial on behalf of the Director. 37 C.F.R. § 42.4(a). Petitioner has the burden of proof. Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (“In an IPR, the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.”). A decision to institute is “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition.” PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018). After considering the Petition and the evidence of record, and further based on the analysis in this Decision, we determine that Petitioner has demonstrated that there is a reasonable likelihood that at least one of the challenged claims is unpatentable. Accordingly, we institute an inter partes review of all challenged claims and on all grounds asserted in the Petition.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that a person of ordinary skill in the art “at the time of the alleged invention would have had a master’s degree in Aerospace or Naval Engineering, or equivalent experience, and one to two years of experience in the field of watercraft design and construction.” Pet. 24–25 (citing Ex. 1002 ¶ 20). Dr. Brizzolara’s cited testimony is somewhat different than what is asserted by Petitioner. Dr. Brizzolara’s testimony adds that the “one or two years of experience in watercraft design and construction” would have been “particularly as that design and construction is related to personal watercraft design and construction and/or hydrofoil design and construction.” Ex. 1002 ¶ 20. Dr. Brizzolara also testifies: This level of skill in the art is appropriate because concepts of hydrofoil design and construction along with appropriate fluid dynamics to teach the skills necessary to design and construct hydrofoil-based watercraft are taught in master’s level courses. These concepts that would be understood would include academic teaching of flight dynamics utilizing well known texts (such as Etkin, B., & Reid, L. D. (1995) Dynamics of Flight: Stability and Control. John Wiley & Sons). Moreover, an additional one to two years of experience in the industry would give one o[f] ordinary skill in the art experience with how such systems are implemented in the real world.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner states “that no terms need to be construed to resolve the issues raised in this Petition because the prior art discloses all limitations under any plausible construction. Pet. 16. At this initial stage of the proceeding, we do not perceive the need to construe any claim limitation. Claims must be construed “only to the extent necessary to resolve the controversy.” AstraZeneca AB v. Mylan Pharms. Inc., 19 F.4th 1325, 1345 (Fed. Cir. 2021) (quoting Vivid Techs., Inc. v. American Science & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe the claim preambles here where the construction is not ‘material to the [obviousness] dispute.’” (citations omitted)).” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “stage, the petition must identify, with particularity, evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent and therefore that there is a reasonable likelihood that it qualifies as a printed publication.” Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29 at 13 (PTAB Dec. 20, 2019) (precedential). Thus, we address this issue presented by Petitioner. The determination of whether a document is a “printed publication” under 35 U.S.C. § 102 “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). “Because there are many ways in which a reference may be disseminated to the interested public, ‘public accessibility’ has been called the touchstone in determining whether a reference constitutes a ‘printed publication.’” Jazz Pharm., Inc. v. Amneal Pharm., LLC, 895 F.3d 1347, 1355 (Fed. Cir. 2018) (quoting In re Hall, 781 F.2d 897, 898–99 (Fed. Cir. 1986)). The Federal Circuit has “interpreted § 102 broadly, finding that even relatively obscure documents qualify as prior art so long as the relevant public has a means of accessing them.” GoPro, Inc. v. Contour IP Holding LLC, 908 F.3d 690, 693 (Fed. Cir. 2018). Moreover, “[i]f accessibility is proved, there is no requirement to show that particular members of the public actually received the information.” Constant v. Advanced Micro-Devices, Inc., 848 F.2d 1560, 1569 (Fed. Cir. 1988); see also In re Lister, 583 F.3d 1307, 1313–14 (Fed. Cir. 2009) (“[O]nce accessibility is shown, it is unnecessary to show that anyone actually inspected the reference.”).” slip op. at 20

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,586,659
• Babybjörn AB v. The Ergo Baby Carrier, Inc.Institution denied
  PTAB · Apr 22, 2025 · IPR2025-00111 · APJ Eric C Jeschke · IPR · Institution

  The Board denied institution of IPR on all challenged claims under § 314(a), finding the reasons offered for a second parallel petition unpersuasive.

  RulingsInstitution decision

  • Parallel petitionsInstitution denied discretionary otherDenied

    “petitioner files two or more petitions challenging the same patent, we consider guidance in the Consolidated Trial Practice Guide, which provides that “one petition should be sufficient to challenge the claims of a patent in most situations” and that “multiple petitions by a petitioner are not necessary in the vast majority of cases.” Trial Practice Guide 59 (Nov. 2019), available at https://www.uspto.gov/TrialPracticeGuideConsolidated (“TPG”). In such circumstances, a petitioner should provide: (1) a ranking of the petitions in the order in which it wishes the Board to consider the merits, if the Board uses its discretion to institute any of the petitions, and (2) a succinct explanation of the differences between the petitions, why the issues addressed by the differences are material, and why the Board should exercise its discretion to institute additional petitions if it identifies one petition that satisfies petitioner’s burden under 35 U.S.C. § 314(a). TPG 59–60. The Trial Practice Guide provides that “the Board recognizes that there may be circumstances in which more than one petition may be necessary” and that “two petitions by a petitioner may be needed, although this should be rare.” Id. at 59.” slip op. at 9

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner

    “We disagree with Petitioner that the still-open outcome of Lynk Labs in any way impacts the availability of Lundh in either the 110 IPR or this proceeding.10 Critically, in Lynk Labs, the Federal Circuit examined the prior art date of a U.S. patent application publication under pre-AIA § 102(e)(1) because the challenged patent in that case had a priority date in February 2004—well before the 2013 effective date of the AIA’s revisions to §§ 102, 103—such that the pre-AIA versions of § 102 determined the” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Decided for patent owner

    “We are not persuaded that this assertion supports the argument for a second petition. As argued by Patent Owner, Petitioner’s alleged need is undermined by the distribution of its arguments across the 110 IPR and this proceeding. As discussed above, for the “at least one thigh support adjusters” in the 110 IPR, Petitioner relies on one prior art structure from the first category and two prior art structures from the second category; and for the “at least one thigh support adjusters” in this proceeding, Petitioner relies on two prior art structures from the first category and one prior art structure from the second category. Id. In other words, as stated by Patent Owner, “Petitioner was able to address both its constructions in both of its Petitions.” Resp. 3–411; see also Medacta USA, Inc. v. RSB Spine, LLC, IPR2020-00275, Paper 22 at 10–11 (PTAB May 22, 2020) (denying institution of a second-ranked parallel petition challenging the same claims of the same patent and stating, “Because Petitioner was able to present an alternative challenge contingent upon [the] alternative claim construction” in the first-ranked petition, “we fail to see how uncertainty regarding claim construction justifies two petitions.”). In contrast, in the SolarEdge decision cited by Petitioner, the first-ranked petition presented one approach as to the prior art and the second-ranked petition was permitted because it presented a different approach, such that the two petitions “do not overlap in any meaningful way.” SolarEdge v. SMA Solar Techs., IPR2019-01224, Paper 10 at 10 (PTAB Jan. 23, 2020), cited at Expl. 4. Turning to the discovery issue, we determine that the alleged failure of Patent Owner to answer adequately an interrogatory in the Texas Litigation seeking information on “all corresponding disclosures and written 11 Petitioner highlights the two categories of prior art structures identified across the six grounds in these two proceedings rather than the two different constructions for “at least one thigh support adjuster” proposed. Looking at the distributions of the constructions presented, however, the same reasoning above applies as Petitioner relied on each construction at least twice to address the “one thigh support adjuster” in each proceeding. See 110 Petition 27 (relying on both constructions for Ground 1), 53–57 (relying on only a § 112(f) construction for Ground 2), 86–90 (relying on both constructions for Ground 3); Pet. 29–34 (relying on only a § 112(f) construction for Ground 4), 61–63 (relying on both constructions for Ground 5), 88–90 (relying on both constructions for Ground 6). description support for the ‘at least one thigh support adjuster’ limitation” (Ex. 1029 at 5) does not warrant a second petition here. The challenged patent was clearly available to Petitioner, and Petitioner was—even with Patent Owner’s non-substantive answer to the interrogatory (id. at 6)—able to propose a construction of “at least one thigh support adjuster” under § 112(f). See Pet. 7–12. For these reasons, the two different constructions presented do not warrant a second petition in this proceeding.” slip op. at 12

  Claim construction§ 102 anticipationDiscretionary denial
  Patents in suitUS 11,786,055
• Babybjörn AB v. The Ergo Baby Carrier, Inc.Institution denied
  PTAB · Apr 22, 2025 · IPR2025-00110 · APJ Eric C Jeschke · IPR · Institution

  The Board denied institution because the petition did not show a reasonable likelihood of proving any challenged claim unpatentable over the asserted prior art.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2024) (“The Board institutes the trial on behalf of the Director.”). Inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314. Upon consideration of the evidence and arguments in the record, for the reasons below, we determine that the information presented does not show a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. We thus deny institution of inter partes review. See 37 C.F.R. § 42.108(b) (“At any time prior to a decision on institution of inter partes review, the Board may deny all grounds for unpatentability for all of the challenged claims. Denial of all grounds is a Board decision not to institute inter partes review.”).” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “person having ordinary skill in the art “would have had at least a four-year degree in a design-based field, which may include fashion design, industrial design, mechanical engineering, or another technical field, or equivalent experience, and familiarity working with child products and/or adjustable products.” Pet. 6–7 (citing Smith Decl. ¶¶ 32–38). Patent Owner does not address Petitioner’s proposed definition, which appears consistent with the record in this proceeding, including the prior art. See GPAC Inc., 57 F.3d at 1579. Furthermore, Patent Owner does not argue that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would understand either the challenged patent or the prior art. For purposes of this Decision, we adopt the definition of the level of ordinary skill in the art proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Based on the current record, we need not construe explicitly the term “at least one thigh support adjuster” because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). More particularly, and as discussed below, Petitioner does not show sufficiently how the prior art teaches the structure identified as corresponding to the alleged claimed function. Further, because we deny on the merits (as discussed below), we do not address Patent Owner’s alternative argument that we should deny institution because “Petitioner fails to construe th[is] limitation and otherwise argues for an advisory opinion from the Board on indefiniteness.” Prelim. Resp. 1; see id. at 1–6 (entire argument). 2. “defined by” Limitations 1j and 11l each recite “a first setting, a second setting, and a third setting defined by the adjustable child carrier.” Ex. 1001, 17:38–39 (emphasis added), 19:43–44 (emphasis added). Limitation 6k recites “a first position, a second position, and a third position defined by the adjustable child carrier.” Id. at 18:36–37 (emphasis added). Patent Owner proposes a construction for “defined by” in these limitations. See Prelim. Resp. 12–15. At this stage of the proceeding and based on the current record, we need not construe explicitly “defined by”” slip op. at 11

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “Public accessibility “has been called the touchstone in determining whether a reference constitutes a ‘printed publication’ . . . .” Blue Calypso, LLC v. Groupon, Inc., 815 F.3d 1331, 1348 (Fed. Cir. 2016) (quoting In re Hall, 781 F.2d 897, 898–99 (Fed. Cir. 1986)). In Hulu, the Precedential Opinion Panel (“POP”) rejected a petitioner’s argument that a reference necessarily meets “the reasonable likelihood standard for institution where the reference bears conventional markers of publication, such as a copyright date, edition identifiers, publication by a commercial publisher, and the assignment of an ISBN number.” Hulu, Paper 29 at 17. The POP stated: “We do not hold that any particular indicia per se is sufficient at the institution stage. Rather, the indicia on the face of a reference, such as printed dates and stamps, are considered as part of the totality of the evidence.” Id. at 17–18 (citing Nobel Biocare Servs. AG v. Instradent USA, Inc., 903 F.3d 1365, 1377 (Fed. Cir. 2018)). Here, Petitioner provides no citation, no discussion, and no support for its assertion that the Synergy Manual was “published” in “2007.” See Pet. 2. Instead, we are left to assume that Petitioner relies on the text “© BabyBjörn AB, Stockholm, 2007” at the bottom of page 6 of the Synergy Manual. More to the point, Petitioner does not discuss in the Petition any evidence supporting the implicit position that the Synergy Manual was publicly accessible prior to the critical date of the claimed invention.” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 11,786,055
• Mobileye Global, Inc. v. Facet Technology Corp.Rehearing denied
  PTAB · Apr 22, 2025 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Rehearing

  The Board denied Patent Owner’s rehearing request, leaving institution in place on claim 15 based on the Gallagher–Lumia obviousness challenge.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “II. STANDARD OF REVIEW A party requesting rehearing bears the burden of showing that the decision should be modified. 37 C.F.R. § 42.71(d). The party must identify specifically all matters we misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply. Id. When reconsidering a decision on institution, we review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors. Star Fruits S.N.C. v. United States, 393 F.3d 1277, 1281 (Fed. Cir. 2005); Arnold P’ship v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004).” slip op. at 2

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “or overlooked any matter. As we explained in the Institution Decision, the ’255 patent discloses that the recited characterization profile allows the system to convert the intensity values measured by the intensity sensor into luminance values based on the sensor’s ability to sense the particular color of the measured light. Inst. Dec. 21; Ex. 1001, 11:41–48. The ’255 patent states that “the light intensity sensor’s 280 ability to sense . . . a particular color” is the “the light intensity sensor’s 280 profile for [that] particular color.” Ex. 1001, 11:45–47. The ’255 patent further states that this “[l]ight intensity sensor 280 characterization is essential for high precision computations.” Id. at 11:48–49. Thus, as we stated in the Institution Decision, the recited “characterization profile” refers to a conversion factor used to convert the measured light intensity into luminance. As this conversion factor is based on the light intensity sensor’s ability to sense the particular color of light reflected by the road sign, we agree that it is empirical information. Patent Owner fails to explain adequately how the fact that the ’255 patent discloses storing multiple conversion factors for multiple colors of measured light in a digital look-up-table (see id. at 11:56–59 (“The light intensity sensor characterization 275 is empirical information about the light intensity sensor 280 that is used to create the [look-up table] 475.”)) has any bearing on our interpretation.” slip op. at 4

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

    “Owner to the Institution Decision where we fully addressed Patent Owner’s contentions. See Inst. Dec. 29–31. As we explained, “Petitioner proposes to incorporate Lumia’s teaching of measuring luminance values into Gallagher’s system, and argues that an ordinarily skilled artisan would have had a reasonable expectation of success given Gallagher’s disclosure of determining calibration factors for each individual sensor in the array of sensors.” Id. at 30. In other words, Petitioner proposes to use Gallagher’s array of sensors to measure luminance in the manner taught by Lumia. We also explained in the Institution Decision how Lumia discloses using a video camera to measure the luminance of a road sign. Id. at 27–29. We further explained that, in the Petition, “Petitioner sets forth reasoning with rational underpinning to support its contentions that it would have been obvious to combine the teachings of Gallagher and Lumia” by, for example, “argu[ing] that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels.” Id. at 30–30 (citing Pet. 46). We further explained that Petitioner’s arguments were supported by the testimony of it witness, Dr. Thorpe. Id. at 31 (citing Ex. 1003 ¶ 116).” slip op. at 7

  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 9,335,255
• Deere & Company v. David’S Dozer V-Loc System, Inc.Institution denied
  PTAB · Mar 18, 2025 · IPR2024-01442 · APJ Robert J Silverman · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–4 unpatentable under any asserted obviousness ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the Petition and the Preliminary Response (including any other authorized submissions) “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.”” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner’s proposal for the level of ordinary skill in the art differs from that of Petitioner, primarily because Patent Owner contends that such a person of ordinary skill would have a certain degree of experience relating specifically to skid steers, or similar machinery, and their hydraulic systems. See Prelim. Resp. 8–10 (citing Ex. 2001 ¶ 31). Insofar as we understand the significance of Patent Owner’s concerns about the differences between the parties’ proposals, these differences do not bear upon the issues addressed herein. Accordingly, for the purposes of the present Decision, we adopt Petitioner’s proposed definition of the relevant level of ordinary skill in the art. Further, with regard to the issues addressed in this Decision, Petitioner’s proposed description of the level of ordinary skill in the art appears to be consistent with the level of skill indicated by the ’300 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner. Petitioner argues that “Patent Owner made the deliberate choice to claim broadly,” eschewing “structural limitations that would have expressly or implicitly required the hydraulic of Element [1.4] to differ from the hydraulic of Element [1.5].” Reply 7. Further, Petitioner argues that “Patent Owner chose to generically recite ‘a hydraulic’ in each of Elements [1.4] and [1.5] without distinguishing labels, identifiers, or qualifiers.” Id. To the contrary, the two recited “hydraulic[s]” are distinguished by the language surrounding and modifying each instance in the method of claim 1. Indeed, the recitations of distinct operations performed by each “hydraulic,” in the claimed method, further support the understanding these are distinct and different structures. Additionally, as Patent Owner contends (see Prelim. Resp. 16), each instance of “hydraulic” is introduced with the indefinite article “a” — a signal that the two instances of “a hydraulic” do not refer to the same structure. See Becton, Dickinson and Co. v. Tyco Healthcare Group, LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (“Where a claim lists elements separately, ‘the clear implication of the claim language’ is that those elements are ‘distinct components’ of the patented invention.”) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004)); see also CAE Screenplates, Inc. v. Heinrich Fiedler GmbH & Co., 224 F.3d 1308, 1317 (Fed. Cir. 2000) (“In the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings.”); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996) (concluding that where a claim provides for two separate elements, a “second portion” and a “return portion,” these two elements “logically cannot be one and the same”).” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundNot shown unpatentableNot shown unpatentable

    “As Patent Owner argues, Petitioner’s proposed combination of Funk and Lewis “would interfere with the intended operation of the Funk control system to move the lift arms up and down in response to inter alia changes in the height signal.” Prelim. Resp. 20. This scenario is similar to that in Tec Air, 192 F.3d at 1356, which involved a claimed injection-molding technique that used screw-threaded adjustable plugs accessed from the inner, cavity-facing, side of the mold. The proposed combination included a prior art reference disclosing adjustment members accessed from the opposite, outer, side of the mold, and having a non-threaded smooth tip that extended through the mold and into the cavity. Id. at 1360. The Federal Circuit held that the prior art reference was properly determined to teach away from the claimed invention, because “no screw driver would be able to turn the smooth-headed screws from the cavity-side of the mold,” hence the proposed “combination would be inoperable for its intended purpose.” Id. Likewise, the proposed combination in the present matter teaches away from the subject matter of claim 1, because it would “immobilize [Funk’s] main arm,” and its associated hydraulic cylinder 18, “leaving just ‘one’ of Funk’s two adjustment mechanisms — blade tilt — available for grade control” (Pet. 10), thereby decreasing the system’s accuracy (see Ex. 2001 ¶¶ 113– 14) and negating the very technique that Funk relies upon to achieve its stated goal. See Ex. 1004 ¶ 7 (“[O]ne object of the present invention is to provide an automatic leveling control system that is sufficiently accurate for preparing the ground prior to the construction of concrete floors and foundations.”)” slip op. at 28

  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · Markman · KSR · Graham
  Patents in suitUS 10,533,300
• Hesai Technology Co., Ltd. v. Ouster, Inc.All claims unpatentable
  PTAB · Mar 17, 2025 · IPR2023-01456 · APJ Kevin W Cherry · IPR · Final written decision

  Claims 1–3, 5–8, and 10–17 are unpatentable as obvious over Imai and Higashi, with Grzesik or Pacala for dependent claims; remaining grounds were not reached.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Petitioner asserts that a person of ordinary skill in the art would have had an undergraduate degree in mechanical or electrical engineering or physics, plus 2–3 years of experience in LiDAR design. Pet. 3 (citing Ex. 1003 ¶¶ 72–77). Patent Owner argues that a POSITA would have had an undergraduate degree in mechanical or electrical engineering and two to three years of work experience with electro-optical and electro-mechanical devices or systems, with, at a minimum, at least one year of work experience was with LIDAR designs, where less work experience may be compensated by a higher level of education or vice versa. PO Resp. 4 (citing Ex. 2009 ¶ 60). We agree with and will apply Patent Owner’s statement of the level of ordinary skill in the art. This level of ordinary skill is reflective of the education and experience that would have been required to understand the problems and solutions identified in the ’381 patent and the prior art. Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “The term “coincident with” as used in the ’381 patent does not require perfect coincidence. To explain why, we provide an annotated version of Figure 2 of the ’381 patent below. In Figure 2 above, the rays of electromagnetic radiation indicated in red originate from illumination source 111, but they are not coincident with the corresponding aperture’s field of view, and instead they are absorbed or blocked by the aperture layer’s stop region. Ex. 1001, 3:61–4:5. As Figure 2 shows, out of five ray lines emitted by illumination source 111, only three are within its corresponding aperture’s field of view. This conveys an understanding that “coincident with” does not require perfect matching of the discrete spot of radiation from the illumination source and the aperture’s field of view.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We begin with the language of the claims. The claims merely require that the “plurality of pixels are arranged in a second arrangement, proportional to the first arrangement.” Ex. 1001, 17:30–31. There are no other specific requirements about “first arrangement” or the “second arrangement” and no specific requirement about what kind of “proportional[ity]” is required. Thus, the language of the claims does not provide a basis for Patent Owner’s narrow reading, nor does it necessarily preclude it.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Petitioner identifies multiple reasons to make this combination. First, with respect to Higashi’s bandpass filter, Petitioner argues that “a POSITA would have been prompted to implement Imai’s system to include a bandpass filter for the received light (as suggested by Higashi) so as to advantageously pass through only light of the operational wavelength of the corresponding laser emitter and ‘eliminate the effect of background light.’” Id. at 60 (citing Ex. 1011 ¶ 86; Ex. 1003 ¶ 256). Petitioner contends that “the resulting combination would advantageously filter out interfering light sources along the optical path of each of the detector pixels, thereby improving accuracy, improving the signal-to-noise ratio, and reducing the likelihood of false detections at the detector pixel.” Id. at 61. Second, Petitioner argues that “a POSITA would have been motivated to arrange multiple SPADs in each of Imai’s detector pixels (e.g., pixels 1- 16 in Imai’s FIG. 11) so that “erroneous detection of pixels[] can be reduced” and improved accuracy is achieved.” Id. (citing Ex. 1011 ¶ 71–72; Ex. 1003 ¶ 257; Ex. 1009 ¶ 48). Third, Petitioner contends that using Higashi’s multi-SPADs in Imai’s detector pixels would have led to uninterrupted performance when an individual diode is quenched, and would have furthered Imai’s objective of “inhibiting the increase of detection obtaining time” because multi-SPADs facilitate high speed data processing as they can take turns to receive the incoming photons. Id. (Ex. 1009 ¶¶ 6–7; Ex. 1011 ¶¶ 71, 72; Ex. 1027 ¶¶ 3– 4; Ex. 1003 ¶ 258). Fourth, Petitioner asserts that the combination “was simply the” slip op. at 45

  Patent outcomesUS 11,178,381 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,178,381

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.