• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.Some claims unpatentable
  PTAB · Jan 23, 2026 · IPR2024-01111 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claims 1–4 and 8–13 are unpatentable as obvious over Gallagher and Schofield; claims 5–7 and 14–16 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANo construction needed

    “As a general rule, unless the steps of a method claim actually recite an order, the steps are not ordinarily construed to require one.” Mformation Techs., Inc. v. Rsch. in Motion Ltd., 764 F.3d 1392, 1398 (Fed. Cir. 2014) (citation modified). “However, a claim requires an ordering of steps when the claim language, as a matter of logic or grammar, requires that the steps be performed in the order written, or the specification directly or implicitly requires an order of steps.” Id. (cleaned up). “[O]rdinarily in process claims steps taken concurrently are the equivalent of steps taken successively.” In re White, 39 F.2d 974, 975 (CCPA 1930); see also Cybersettle, 243 F. App’x. at 609 (finding “the step of calculating the differences between demands and offers can occur concurrently with the [next enumerated step of] receipt of multiple demands and offers” and “the testing step of ‘determining whether any of the differences fall within the predetermined settlement range’ may occur concurrently with the receipt and comparison of the bids” (citation modified)). This is especially true here, given that the recitations at issue are functional language in an apparatus (system) claim. We further agree with Petitioner that the ’328 patent discloses such concurrent performance of these steps: Either concurrent with or subsequent to the identification of road signs 30 and generation of asset management database 24, the computer processor 22 evaluates that portion 32 of each video frame or image that depicts a road sign 30 to determine a set of color values 40, 42 for each of a plurality of colors on the road sign 32. A retroreflectivity value is generated for each color portion 34, 36 on each frame of the tagged videostream 20 containing the road sign 30 that represents a different color value 40, 42. Ex. 1001, 5:52–60. Thus, the ’328 patent discloses concurrently detecting objects of interest (road signs) and determining whether the object of interest has a particular color value. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Petitioner is correct to the extent that it need not show that “the features of [Schofield] may be bodily incorporated into the structure of [Gallagher],” but Petitioner must prove that “a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention.” Allied Erecting, 825 F.3d at 1381. For claim 9, Petitioner proposes to modify Gallagher’s system to use “Schofield’s determination of a light source’s location within a field of view” in Gallagher’s system. Pet. 23. Thus, Petitioner’s combination does not require the combination of Gallagher’s and Schofield’s sensors into a single system, and Patent Owner’s “sensor fusion” argument is inapposite. See Tr. 48:8–49:6 (Patent Owner’s counsel confirming that the problem of “sensor fusion” stems from combining disparate sensors in a single system). As noted above, Schofield teaches considering the relative location of the light source in determining whether the light source is from headlights or taillights (that is, an object of interest). See Ex. 1006, 9:26–35. We are persuaded that an ordinarily skilled artisan would be motivated to use this teaching in Gallagher’s device to help distinguish between road markers that are arranged side-by-side and have a reasonable expectation of success in doing so. See Ex. 1005 ¶ 40; Ex. 1003 ¶¶ 77 (“[An ordinarily skilled artisan] would have seen Schofield’s determination of a light source’s location within the field of view as advantageous because it would have allowed Gallagher’s computer to associate the measured reflectance level with the appropriate road marker.”), 79 (“[I]mplementing this determination would have required [an ordinarily skilled artisan] to implement only conventional techniques of image processing (identifying a location of a particular pixel within an array), which was well known by [an ordinarily skilled artisan], to predictably yield the result of the location within a field of view indicating an intensity value associated with a road marker. Given that Schofield and Gallagher disclose similar types of arrays, this combination would have merely required the use of Schofield’s known technique to improve Gallagher’s similar device in the same way.”).” slip op. at 30

  • Expert testimonyPatent owner expert discountedOther

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11

  Patent outcomesUS 9,671,328 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,671,328
• Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.No claims unpatentable
  PTAB · Jan 23, 2026 · IPR2024-01110 · APJ Sean P O’Hanlon · IPR · Final written decision

  Claim 15 was not shown unpatentable under § 103 over Gallagher and Lumia because Petitioner did not persuasively explain why a skilled artisan would combine their teachings.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties disagree only on the length of experience an ordinarily skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. As noted by Petitioner, Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 23. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (alteration in original) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For purposes of this Decision, we determine that no construction of any term is necessary. slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not articulated persuasive reasoning for combining the teachings of Gallagher and Lumia. Petitioner argues that implementing Lumia’s teaching of determining the luminance of traffic signs in Gallagher’s system would allow Gallagher’s system to calculate the retroreflectivity of road markers as a means of identifying any markers that do not meet minimum acceptable reflectance levels for countries that require a minimum retroreflectivity level for road markers. Pet. 46 (citing Ex. 1003 ¶ 116; Ex. 1005 ¶¶ 49, 77; Ex. 1019, 6, 8–11).7 However, Gallagher already discloses determining whether the 7 Petitioner and Dr. Thorpe cite to the original pagination of Exhibit 1019 rather than the added exhibit pagination. reflectance level of each road marker meets a predetermined minimum acceptable reflectance level and tagging those road markers that do not meet the minimum acceptable reflectance level to identify them for replacement. See, e.g., Ex. 1005 ¶¶ 3, 67–68; see also id. ¶¶ 12–13, 18, 21, 49, 51, 76, 79, Fig. 5. Indeed, both Petitioner and Dr. Thorpe describe Gallagher’s system as ensuring that road markers meet minimum retroreflectivity standards: “Gallagher’s apparatus tests ‘road markings and road markers such as, for example, road signs and posts, reflective painted lines whether continuous or broken, and . . . raised pavement markers’ ‘to ensure they continue to meet minimum standards of reflectivity/retroreflectivity.’” Pet. 9 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33); Ex. 1003 ¶ 55 (alteration in original) (emphasis added) (citing Ex. 1005 ¶¶ 3, 6, 31–33). Thus, we agree with Patent Owner that Petitioner has not identified persuasively why an ordinarily skilled artisan would have modified Gallagher’s system to include Lumia’s process for measuring retroreflectivity of traffic signs.” slip op. at 19

  • Strike new argumentNew argument disregardedDecided for patent owner

    “coefficient of luminous intensity rather than the coefficient of retroreflectivity, and Lumia teaches how to calculate retroreflectivity based on the coefficient of luminance intensity. Pet. Reply 20–21. During the hearing, counsel for Petitioner clarified that this reliance on Lumia entails using the equations disclosed in Lumia without altering Gallagher’s hardware. Tr. 27:18–29:24. During his deposition , Dr. Thorpe confirmed that this obviousness theory relies only on Lumia’s equations. See Ex. 2025, 60:5–65:2. This is an improper new argument. See, e.g., Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1330–31 (Fed. Cir. 2019) (“[A]n IPR petitioner may not raise in reply ‘an entirely new rationale’ for why a claim would have been obvious.”). Notably, this new obviousness theory appears to stem from Patent Owner’s witness, Dr. Papanikolopoulos, noting differences in Gallagher’s and Lumia’s disclosures. See Pet. Reply 21 (citing Ex. 2023 ¶¶ 71 n.2, 89).” slip op. at 20

  Patent outcomesUS 9,335,255 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,335,255
• Deere & Company v. David’S Dozer V-Loc System, Inc.Institution denied
  PTAB · Mar 18, 2025 · IPR2024-01442 · APJ Robert J Silverman · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–4 unpatentable under any asserted obviousness ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the Petition and the Preliminary Response (including any other authorized submissions) “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.”” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner’s proposal for the level of ordinary skill in the art differs from that of Petitioner, primarily because Patent Owner contends that such a person of ordinary skill would have a certain degree of experience relating specifically to skid steers, or similar machinery, and their hydraulic systems. See Prelim. Resp. 8–10 (citing Ex. 2001 ¶ 31). Insofar as we understand the significance of Patent Owner’s concerns about the differences between the parties’ proposals, these differences do not bear upon the issues addressed herein. Accordingly, for the purposes of the present Decision, we adopt Petitioner’s proposed definition of the relevant level of ordinary skill in the art. Further, with regard to the issues addressed in this Decision, Petitioner’s proposed description of the level of ordinary skill in the art appears to be consistent with the level of skill indicated by the ’300 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner. Petitioner argues that “Patent Owner made the deliberate choice to claim broadly,” eschewing “structural limitations that would have expressly or implicitly required the hydraulic of Element [1.4] to differ from the hydraulic of Element [1.5].” Reply 7. Further, Petitioner argues that “Patent Owner chose to generically recite ‘a hydraulic’ in each of Elements [1.4] and [1.5] without distinguishing labels, identifiers, or qualifiers.” Id. To the contrary, the two recited “hydraulic[s]” are distinguished by the language surrounding and modifying each instance in the method of claim 1. Indeed, the recitations of distinct operations performed by each “hydraulic,” in the claimed method, further support the understanding these are distinct and different structures. Additionally, as Patent Owner contends (see Prelim. Resp. 16), each instance of “hydraulic” is introduced with the indefinite article “a” — a signal that the two instances of “a hydraulic” do not refer to the same structure. See Becton, Dickinson and Co. v. Tyco Healthcare Group, LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (“Where a claim lists elements separately, ‘the clear implication of the claim language’ is that those elements are ‘distinct components’ of the patented invention.”) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004)); see also CAE Screenplates, Inc. v. Heinrich Fiedler GmbH & Co., 224 F.3d 1308, 1317 (Fed. Cir. 2000) (“In the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings.”); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996) (concluding that where a claim provides for two separate elements, a “second portion” and a “return portion,” these two elements “logically cannot be one and the same”).” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundNot shown unpatentableNot shown unpatentable

    “As Patent Owner argues, Petitioner’s proposed combination of Funk and Lewis “would interfere with the intended operation of the Funk control system to move the lift arms up and down in response to inter alia changes in the height signal.” Prelim. Resp. 20. This scenario is similar to that in Tec Air, 192 F.3d at 1356, which involved a claimed injection-molding technique that used screw-threaded adjustable plugs accessed from the inner, cavity-facing, side of the mold. The proposed combination included a prior art reference disclosing adjustment members accessed from the opposite, outer, side of the mold, and having a non-threaded smooth tip that extended through the mold and into the cavity. Id. at 1360. The Federal Circuit held that the prior art reference was properly determined to teach away from the claimed invention, because “no screw driver would be able to turn the smooth-headed screws from the cavity-side of the mold,” hence the proposed “combination would be inoperable for its intended purpose.” Id. Likewise, the proposed combination in the present matter teaches away from the subject matter of claim 1, because it would “immobilize [Funk’s] main arm,” and its associated hydraulic cylinder 18, “leaving just ‘one’ of Funk’s two adjustment mechanisms — blade tilt — available for grade control” (Pet. 10), thereby decreasing the system’s accuracy (see Ex. 2001 ¶¶ 113– 14) and negating the very technique that Funk relies upon to achieve its stated goal. See Ex. 1004 ¶ 7 (“[O]ne object of the present invention is to provide an automatic leveling control system that is sufficiently accurate for preparing the ground prior to the construction of concrete floors and foundations.”)” slip op. at 28

  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · Markman · KSR · Graham
  Patents in suitUS 10,533,300
• Head Sport GmbH v. Vermont Safety Developments LLCInstitution denied
  PTAB · Jan 15, 2025 · IPR2024-01099 · APJ Barry L Grossman · IPR · Institution

  The Board denied institution on all challenged claims because Petitioner did not show that the prior art met the claims under the Board’s construction of “release logic.”

  RulingsInstitution decision

  • Other 314aNot reached

    “Thus, based in part on the “relatively minimal proceedings” in the District Court, and the “[t]he possibility of significant simplification” for the District Court from our claim construction of the term “release logic,” we decline Patent Owner’s invitation to discretionarily deny the petition. Moreover, we need not address Patent Owner’s contentions concerning discretionary denial because, as discussed below, Petitioner has not established a reasonable likelihood of prevailing on the merits in demonstrating unpatentability of any challenged claim of the ’953 patent. See MillerKnoll, Inc. v. Aaron DeJule, IPR2023-01428, Paper 8, 10 (PTAB March 22, 2024).” slip op. at 20

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “We now turn to the merits of Petitioner’s asserted Grounds of unpatentability. Analysis of Claims We focus our analysis on the term “release logic,” which appears in all the challenged claims. As we explained above, we determined that the term “release logic” along with its recited functions should be construed under Section 112 ¶ 6 to cover “corresponding structure, material, or acts described in the specification and equivalents thereof,” that perform the recited functions. Petitioner did not identify how the asserted prior art described those structures or their equivalents. Instead, as discussed above, Petitioner relied on Patent Owner’s preliminary construction in the District Court, which Patent Owner identified in wholly functional terms as a “specific sequence of actions.” Pet. 6 (citing Ex. 1010; Ex. 1002 ¶¶ 52–53); Prelim. CC Reply 1 (citing Ex. 1010, 5). Thus, Petitioner’s analysis fails to address how the prior art meets the limitations set forth in the claims as we have interpreted those claims. Accordingly, we find that Petitioner has failed to meet its burden to establish a reasonable likelihood that it would prevail with respect to at least one of the claims challenged in the petition. Thus we deny institution of an inter partes review. See Samsung Elecs. Am., Inc. v. Cobblestone Wireless, LLC, IPR2024-00319, Paper 16, slip op. 16–23 (PTAB Jun. 24, 2024) (holding that because Petitioner’s obviousness showing was based on an incorrect claim construction, Petitioner did not demonstrate a reasonable likelihood that a claim limitation was disclosed by, or would have been obvious over, the cited reference).” slip op. at 49

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner

    “be persuasive, we conclude that an ordinarily skilled artisan would not have understood “release logic” to refer to, or to have a definite meaning as the name for structure. Accordingly, we find that any presumption that the claims at issue do not invoke § 112, ¶ 6 is overcome, and we conclude that “release logic” introduces claim language that is properly interpreted under § 112, ¶ 6. Dr. Hull’s testimony in the District Court appears to address only the embodiment disclosed in Figures 9–11 of the ’953 patent. He did not opine on the other embodiments disclosed in the patent, such as the embodiment in Figures 22–24 disclosing electronic third-quadrant release-logic binding system 2204. However, his testimony that the words of the claim would not be understood by an ordinarily skilled artisan to have definite meaning as the name for structure remains persuasive.” slip op. at 48

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “sophistication of the technology; and (5) educational level of active workers in the field.” Id. ¶ 30. Dr. Hull fails to state whether these factors were relied upon in forming his opinion, and if so, he also fails to state the underlying facts or data relating to these factors on which the opinion is based. There is no evidence to support why an “advanced degree” in mechanical engineering and five years of relevant experience is required. His opinion is supported only by his statement that he is “familiar with the technology at issue here and the state of the art at the time the application leading to the ’953 patent was filed.” Ex. 1002 ¶ 31. Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight. 37 C.F.R. § 42.65(a). Here, based on Dr. Hull’s extensive experience, we give his testimony some, but little, weight. Patent Owner states that “for purposes of this Preliminary Response only, VSD does not now dispute the definition of the POSITA as set forth by Dr. Hull.” Prelim. Resp. 7. We note that Patent Owner’s position is based on Dr. Hull’s full testimony, not the excerpt asserted by Petitioner. Accordingly, for purposes of this Decision, and based on the limited record before us, we determine, based on Dr. Hull’s testimony, the cited prior art, and Patent Owner’s qualified agreement with Dr. Hull’s testimony, that a person of ordinary skill in the relevant technology would have had an advanced degree in mechanical engineering or a related discipline and five years of experience in either ski binding design, manufacture, or testing; research concerning ski bindings and related equipment; or the development of standards concerning ski bindings or related equipment. This level of skill is approximate, and more experience would compensate for less formal education, and vice versa.” slip op. at 25

  Claim constructionDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 7,523,953
• Fluidmaster, Inc. v. Danco, Inc.Instituted
  PTAB · Sep 9, 2024 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Institution

  Instituted IPR of claims 1–20 on all asserted grounds; the Board found a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’993 patent. Accordingly, we institute an inter partes review of claims 1–20 of the ’993 patent on the grounds asserted in the Petition.” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied

    “presented to the Office.” Prelim. Resp. 31– 36. In determining whether to deny institution under § 325(d) we use a two-part framework, as follows: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-01586, Paper 8 at 17–18 (PTAB Dec. 15, 2017) (precedential as to § III.C.5, first paragraph)).” slip op. at 8

  • BurdenDecided for petitioner

    “At this stage of the proceeding, Patent Owner provides no sufficient evidence to rebut Dr. Cameron’s testimony as to what a POSITA would have known from Guoxin and Ho’s drawings and as to the alleged motivations to combine Guoxin and Ho. Based on Petitioner’s evidence and analysis, and taking into account the Preliminary Response, at this stage of the proceeding, we determine that the information in the Petition shows a reasonable likelihood that claim 1 is unpatentable over Guoxin and Ho.” slip op. at 24

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’993 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. Prelim. Resp. 16. Petitioner’s declarant Dr. Cameron asserts that: A [POSITA] with respect to the subject matter of the ’993 patent at the time of the priority date, January 27, 2014, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. Ex. 1004 ¶ 29. For purposes of this Decision, we adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’993 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Dr. Cameron.” slip op. at 12

  Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 9,139,993
• Fluidmaster, Inc. v. Danco, Inc.Instituted
  PTAB · Sep 9, 2024 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Institution

  The Board instituted IPR of claims 1–24 on all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’105 patent. Accordingly, we institute an inter partes review of claims 1–24 of the ’105 patent on the grounds asserted in the Petition.” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied

    “Previously presented art includes art made of record by the Examiner, and art provided to the Office by an applicant, such as on an Information Disclosure Statement (“IDS”), in the prosecution history of the challenged patent. Id. at 7–8. Here, it is not disputed that Brown and Bjerke were listed on an IDS and, thus, were previously presented to the Office. Pet. 12, n.4; Prelim. Resp. 33. It is also not disputed that Guoxin, Ho, Calmettes, Hall, Kimber, and Schuster were not previously presented to the Office. See Prelim. Resp. 33. Patent Owner argues that Guoxin, Brown, and Ho are cumulative of a reference, DeMarco9, that was previously presented to the Office and relied upon to reject the claims. Prelim. Resp. 33 Patent Owner argues that Guoxin, Brown, and Ho are cumulative to DeMarco because all of the “references are completely silent as to whether the purported ‘extended portion’ is integrally molded with the purported body of the toiled fill valve.” Id. at 33–36. Patent Owner’s arguments are unpersuasive. As can be seen from our discussion of Ho in our analysis below, on this record, we are persuaded that Petitioner has sufficiently shown for purposes of institution how Ho allegedly teaches the claimed integrally molded extended portion. We, thus, are not persuaded that at least Ho is cumulative of DeMarco. Grounds 1–4 rely upon combinations of prior art that include Ho. Ground 5 is based upon Schuster, which was not previously presented to the 9 U.S. Patent No. 5,708,991 (Ex. 1024). Office. Accordingly, we determine that discretionary denial is not warranted. Because we determine that part one of the framework is not satisfied, we need not turn to part two to determine whether Petitioner demonstrates that the Office erred in a manner material to the patentability of the challenged claims. For the reasons discussed above, we decline to exercise our discretion under § 325(d) to deny the Petition.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “On this record, we are persuaded by Patent Owner that the claim phrase “integrally molded with” should be construed to mean “molded together as a single structure” and to exclude items created as separate pieces and attached together later. Patent Owner’s construction is consistent with the plain language of the claims, which requires the extended portion be “integrally molded with” the body and not just the extended portion be integral with the body. Further, we determine that Patent Owner’s construction is consistent with the ’105 patent, which discloses that “the bowl fill valve 109 may be molded as a portion of the toilet fill valve 100 or it may be snapped or clamped into place, or it may be attached to the toilet fill valve 100 in some other manner, etc.” Id. at 2:23–26 (emphasis added). At this stage of the proceeding, we construe “integrally molded with” to mean molded together as a single structure.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “Patent Owner next disputes that a POSITA would have combined Guoxin and Ho and argues that Petitioner’s alleged rationale to combine Guoxin and Ho as conclusory and lacks sufficient support. Prelim. Resp. 40–42. We determine that Petitioner has sufficiently articulated a motivation to combine Guoxin and Ho to support institution. Petitioner asserted motivation to combine — improved strength and integrity of connection — is supported by the testimony of Dr. Cameron. Dr. Cameron testifies: “Integrally molding the extended portion of Guoxin with the inlet device as taught by Ho would be advantageous in improving the strength and integrity of the connection, and to make it easier to manufacture and assemble.” Ex. 1004 ¶ 125. Based on the record at this stage of the proceeding, we determine that Petitioner has sufficiently shown that the combination of Guoxin and Ho teaches element 1B.” slip op. at 20

  Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 9,103,105
• Provisur Technologies, Inc. v. Weber Food Technology GmbHInstituted
  PTAB · May 31, 2024 · IPR2024-00235 · APJ Carl M Defranco · IPR · Institution

  The Board instituted IPR on claims 1–6, 8, 10, and 14–16 based on a reasonable likelihood that claims 1 and 14 are anticipated by Young and obvious over Young and Norrie.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Provisur proposes that one of ordinary skill in the art typically would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. Because Provisur’s proposed definition is consistent with the level of skill described in the ’321 patent and the prior art of record, we adopt it here for purposes of institution.” slip op. at 5

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Provisur asserts that the claim terms should be construed “according to their plain and ordinary meanings as understood by [one of ordinary skill in the art] in view of the specification and prosecution history” and that “[n]o terms require an explicit construction to resolve the unpatentability 4 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 5 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 6 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 7 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). controversy between the parties here.” Pet. 13. Weber appears to agree, its counsel stating in the parallel Missouri action that “most of [Weber’s] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 1028, 5. There being no dispute, we need not expressly construe any claim terms at this stage, because we can decide the threshold question of institution without further construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (approving Board decision not to construe claim language where the construction is not material to the dispute).” slip op. at 5

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “Weber requests that we deny institution under 35 U.S.C. § 314(a) due to the advanced state of the parallel Missouri action. See Prelim. Resp. 6– 17. Provisur disputes that discretionary denial is warranted (Pet. 73–77), but nonetheless submits a Sotera stipulation (Ex. 1029) in an effort to resolve the issue.8 In light of Provisur’s Sotera stipulation, we will not discretionarily deny institution under § 314(a). See Director Memorandum, Interim Procedure for Discretionary Denials in AIA-Post Grant Proceedings With Parallel District Court Litigation, U.S. PATENT AND TRADEMARK OFFICE (June 21, 2022), at 3, 7.” slip op. at 6

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted

    “We disagree with Weber’s position, at least on the current record. Instead, we find that Provisur presents sufficient evidence that Young anticipates all elements of independent claims 1 and 14, including the disputed limitation requiring “automatic determination of the thickness of the fat cover.” In particular, Young’s imaging system 190 includes multiple cameras, including top plan camera 196, end view camera 197, and fat line camera 198, as well as controller 172 and real-time image processor 194. Ex. 1004, 17:34–59, 18:46–56, Figs. 2, 13. As described by Young, top plan camera 196 is primarily used to obtain “physical dimensions and characteristics” of the meat product, end view camera 197 is primarily used to determine the “height” of meat product and “to create a clear delineation along the top edge of the end” of the meat product, whereas fat line camera 198 is primarily used to determine the fat/lean separation line of the meat product. See id. at 17:59–18:39. Those disclosures by Young clearly contemplate determining specific dimensions of the meat product, and not simply identifying the fat/lean separation line, as Weber suggests. See Prelim. Resp. 19. To determine the “thickness” of the fat cover, Young’s imaging system has image processing routine 240, which “generates a fat/lean separation line and an edge line . . . representing the outer surface of the pork side proximate the fat/lean line” and uses those lines to calculate “the height, width, and length of the [meat product].” Ex. 1004, 23:12–25, 24:10–22. As part of routine 240, controller 172 uses that information to set the cutting profile of knife assembly 100 “so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Id. at 18:35–39 (emphasis added). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the meat, after cutting, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphasis added)). Young’s disclosure that image processing routine 240 determines a “fixed distance” from the loin/fat separation line at which to cut the meat product undoubtedly corresponds to the claimed “determination of the thickness of the fat cover . . . in a contactless manner.” See Ex. 1003 ¶¶ 104–112. Indeed, Young discloses specific dimensions for the desired optimum fat cover to remain on the meat—“a fixed distance (preferably 0.1 inch) from the fat/lean separation line 6.” Ex. 1004, 20:55–63.” slip op. at 8

  Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denial
  Patents in suitUS 8,529,321
• Oracle Corporation v. Parking World Wide LLCInstituted
  PTAB · Jul 19, 2023 · IPR2023-00385 · APJ Benjamin D M Wood · IPR · Institution

  The Board instituted IPR of claims 1–7 on all asserted grounds, finding a reasonable likelihood that Oracle would prevail on at least one challenged claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon considering the Petition and the Preliminary Response, we determine that Petitioner has satisfied this threshold requirement, and therefore we institute inter partes review of claims 1–7 of the ’421 patent.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at least a Bachelor’s Degree in computer science, electrical engineering, or a related subject, and two years of experience working with augmented reality, portable electronic devices, mobile computing, databases, computer networks, or related technologies. A more advanced degree can substitute for work experience. This POSITA would be aware of and generally knowledgeable about the structure and operation of augmented reality devices as well as different databases and computer networks. Paradiso Decl., ¶¶ 40–43.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner “submit[s] that the terms of the 421 Patent’s claims do not require further construction and can be afforded their plain and ordinary meaning.” Pet. 14–15 (citing Paradiso Decl. ¶ 78). Petitioner submits that the Petition’s “sections comparing the claims to the prior art include further” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “have displayed Ivey’s parking-space-payment information on a real-time camera view, as taught by Matsumoto, to “more efficiently streamline parking enforcement.” Pet. 47–48. Regarding the modified Ivey with Tillotson, Petitioner asserts: A POSITA would have recognized that adapting Ivey in view of Tillotson’s teachings would have been advantageous to both Ivey and Matsumoto and would make the parking management system more efficient and easier to use—a result that would have been highly desirable to a POSITA during the relevant time period, particularly in settings with high usage or limited resources. Id. at 48. Petitioner supports these contentions with Dr. Paradiso’s testimony. Id. at 47–48 (citing Ex. 1003 ¶¶ 279–282). At this stage of the proceeding, and based on the current record, Petitioner’s articulated reasons to combine Ivey, Matsumoto, and Tillotson are supported by rational underpinning.” slip op. at 14

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,438,421

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.