- Fluidmaster, Inc. v. Danco, Inc.InstitutedPTAB · Sep 9, 2024 · IPR2024-00633 · APJ Meredith C Petravick · IPR · Institution
Instituted IPR of claims 1–20 on all asserted grounds; the Board found a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’993 patent. Accordingly, we institute an inter partes review of claims 1–20 of the ’993 patent on the grounds asserted in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDenied
“presented to the Office.” Prelim. Resp. 31– 36. In determining whether to deny institution under § 325(d) we use a two-part framework, as follows: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of [the] first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential). The Becton, Dickinson factors provide useful insight into how to apply the framework under 35 U.S.C. § 325(d). Id. at 9 (referencing Becton, Dickinson & Co. v. B. Braun Melsungen AG, IPR2017-01586, Paper 8 at 17–18 (PTAB Dec. 15, 2017) (precedential as to § III.C.5, first paragraph)).” slip op. at 8
- BurdenDecided for petitioner
“At this stage of the proceeding, Patent Owner provides no sufficient evidence to rebut Dr. Cameron’s testimony as to what a POSITA would have known from Guoxin and Ho’s drawings and as to the alleged motivations to combine Guoxin and Ho. Based on Petitioner’s evidence and analysis, and taking into account the Preliminary Response, at this stage of the proceeding, we determine that the information in the Petition shows a reasonable likelihood that claim 1 is unpatentable over Guoxin and Ho.” slip op. at 24
- Skill levelSkill level patent owner adoptedDecided for patent owner
“A [person of ordinary skill in the art (“POSITA”)] in the field to which the ’993 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. Prelim. Resp. 16. Petitioner’s declarant Dr. Cameron asserts that: A [POSITA] with respect to the subject matter of the ’993 patent at the time of the priority date, January 27, 2014, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. Ex. 1004 ¶ 29. For purposes of this Decision, we adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’993 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Dr. Cameron.” slip op. at 12
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,139,993 - Fluidmaster, Inc. v. Danco, Inc.InstitutedPTAB · Sep 9, 2024 · IPR2024-00634 · APJ Meredith C Petravick · IPR · Institution
The Board instituted IPR of claims 1–24 on all asserted grounds, finding a reasonable likelihood that claim 1 is unpatentable over Brown and Ho.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’105 patent. Accordingly, we institute an inter partes review of claims 1–24 of the ’105 patent on the grounds asserted in the Petition.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“Previously presented art includes art made of record by the Examiner, and art provided to the Office by an applicant, such as on an Information Disclosure Statement (“IDS”), in the prosecution history of the challenged patent. Id. at 7–8. Here, it is not disputed that Brown and Bjerke were listed on an IDS and, thus, were previously presented to the Office. Pet. 12, n.4; Prelim. Resp. 33. It is also not disputed that Guoxin, Ho, Calmettes, Hall, Kimber, and Schuster were not previously presented to the Office. See Prelim. Resp. 33. Patent Owner argues that Guoxin, Brown, and Ho are cumulative of a reference, DeMarco9, that was previously presented to the Office and relied upon to reject the claims. Prelim. Resp. 33 Patent Owner argues that Guoxin, Brown, and Ho are cumulative to DeMarco because all of the “references are completely silent as to whether the purported ‘extended portion’ is integrally molded with the purported body of the toiled fill valve.” Id. at 33–36. Patent Owner’s arguments are unpersuasive. As can be seen from our discussion of Ho in our analysis below, on this record, we are persuaded that Petitioner has sufficiently shown for purposes of institution how Ho allegedly teaches the claimed integrally molded extended portion. We, thus, are not persuaded that at least Ho is cumulative of DeMarco. Grounds 1–4 rely upon combinations of prior art that include Ho. Ground 5 is based upon Schuster, which was not previously presented to the 9 U.S. Patent No. 5,708,991 (Ex. 1024). Office. Accordingly, we determine that discretionary denial is not warranted. Because we determine that part one of the framework is not satisfied, we need not turn to part two to determine whether Petitioner demonstrates that the Office erred in a manner material to the patentability of the challenged claims. For the reasons discussed above, we decline to exercise our discretion under § 325(d) to deny the Petition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“On this record, we are persuaded by Patent Owner that the claim phrase “integrally molded with” should be construed to mean “molded together as a single structure” and to exclude items created as separate pieces and attached together later. Patent Owner’s construction is consistent with the plain language of the claims, which requires the extended portion be “integrally molded with” the body and not just the extended portion be integral with the body. Further, we determine that Patent Owner’s construction is consistent with the ’105 patent, which discloses that “the bowl fill valve 109 may be molded as a portion of the toilet fill valve 100 or it may be snapped or clamped into place, or it may be attached to the toilet fill valve 100 in some other manner, etc.” Id. at 2:23–26 (emphasis added). At this stage of the proceeding, we construe “integrally molded with” to mean molded together as a single structure.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Patent Owner next disputes that a POSITA would have combined Guoxin and Ho and argues that Petitioner’s alleged rationale to combine Guoxin and Ho as conclusory and lacks sufficient support. Prelim. Resp. 40–42. We determine that Petitioner has sufficiently articulated a motivation to combine Guoxin and Ho to support institution. Petitioner asserted motivation to combine — improved strength and integrity of connection — is supported by the testimony of Dr. Cameron. Dr. Cameron testifies: “Integrally molding the extended portion of Guoxin with the inlet device as taught by Ho would be advantageous in improving the strength and integrity of the connection, and to make it easier to manufacture and assemble.” Ex. 1004 ¶ 125. Based on the record at this stage of the proceeding, we determine that Petitioner has sufficiently shown that the combination of Guoxin and Ho teaches element 1B.” slip op. at 20
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,103,105 - Oracle Corporation v. Parking World Wide LLCAll claims unpatentablePTAB · Jul 11, 2024 · IPR2023-00385 · APJ Benjamin D M Wood · IPR · Final written decision
Claims 1–7 are unpatentable as obvious under §103 over Ivey, Matsumoto, and Tillotson, with Slemmer added for claims 4 and 7; Ward, Haynes, and Tillotson provide an alternative ground.
RulingsFinal written decision- Expert testimonyPetitioner expert creditedDecided for petitioner
“improved “efficiency” would have been a sufficient reason for one of ordinary skill in the art to combine Ivey, Matsumoto, and Tillotson, Patent Owner does not expressly dispute Dr. Paradiso’s testimony that the combination of Ivey and Matsumoto “would more efficiently streamline parking enforcement.” Pet. 48. Based on Dr. Paradiso’s undisputed testimony, we find that one of ordinary skill in the art would have been motivated to combine Ivey and Matsumoto in the proposed manner “to more efficiently streamline parking enforcement.” Id. Patent Owner also does not expressly dispute Dr. Paradiso’s testimony that incorporating Tillotson’s reservation and subscription systems into Ivey/Matsumoto would have simplified the payment process and saved motorists’ time. Based on Dr. Paradiso’s testimony, we find that one of ordinary skill in the art would have been motivated to combine Ivey and Matsumoto with Tillotson in the proposed manner to “make the parking management system more efficient and easier to use,” to simplify the process by which parking spaces are paid for, and to save motorists’ time. Id. Finally, Patent Owner does not dispute Petitioner’s contention that one of ordinary skill in the art would have had a reasonable expectation of success in combining the teachings of Ivey, Matsumoto, and Tillotson, or Dr. Paradiso’s testimony in support of that contention. Therefore, based on Dr. Paradiso’s undisputed testimony, we find that one of ordinary skill in the art would have had a reasonable expectation of success in combining these teachings.” slip op. at 27
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner concurs with Petitioner’s definition. See PO Resp. 6 (“Patent Owner concurs with the Board in adopting Petitioner’s definition of a POSITA” for the Decision on Institution). As we did in our Decision on Institution, we adopt Petitioner’s unopposed definition of a person of ordinary skill. See Dec. 9. 8 Patent Owner has not presented any evidence of secondary considerations. 9 We find (and Patent Owner does not dispute) that Dr. Paradiso is qualified to offer expert testimony from the perspective of a skilled artisan. See, e.g., Ex. 1003 ¶¶ 7, 13.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As the parties do not expressly dispute the construction of any particular term, we determine that no express construction of any term is necessary. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (approving Board decision not to construe claim language where the construction is not material to the dispute). Several of Patent Owner’s arguments, however, imply that the claims are limited in particular ways. For example, Patent Owner suggests” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“We disagree that the claims are limited to parking spaces along a street. First, neither independent claim includes any such limitation; instead, the claims are directed to methods “for representing the parking status of a plurality of parking spaces,” without indicating where the plurality of parking spaces are located. Ex. 1001, claims 1, 5. Second, the Specification teaches that the parking spaces that may be represented can be in a lot or garage, not only on a street. See, e.g., id., Abstr. (“A parking status system overlays upon images of a street, a lot, or a garage with representations of parking vehicles the status of any parking space shown in the image.”); id. at 5:4–7 (“The present invention overlays the parking status of vehicles upon a visual image of a street or lot as it matches the GPS coordinates of the parking control officer, the vehicle, and the street scene.”). Patent Owner also suggests that the claims are limited to images obtained from a camera that is part of the user’s portable electronic device. Patent Owner asserts, for example, that Haynes obtains video images from “a camera upon a pole” that is “in a fixed position at a fixed elevation,” whereas “the ’421 patent receives imagery from a mobile device camera held by an officer at his height,” which is “movable.” PO Resp. 24. Again, we disagree that the claims are so limited. The independent claims recite a method for “representing the parking status of a plurality of parking spaces to a screen of a user’s portable electronic device upon a real time camera view.” Ex. 1001, claims 1, 5. “Represent[ing] . . . to a screen” means that the real time camera view of the parking spaces is displayed on the portable electronic device, but does not require the real time camera view to be obtained from the portable electronic device.” slip op. at 11
Patent outcomesUS 10,438,421 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,438,421 - Hunter’S Manufacturing Company, Inc. D/B/A Tenpoint Crossbow Technologies v. Ravin Crossbows, LLCAll claims unpatentablePTAB · Jul 9, 2024 · IPR2023-00407 · APJ Robert J Silverman · IPR · Final written decision
Claim 1 is unpatentable as anticipated by Stanziale ’771; the Board did not reach the alternative grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“As an initial matter, the recited expression “mounted to” is broad. The Federal Circuit has explained that words in a claim “will ordinarily be given their full meaning,” without imposing narrowing modifications on the claim language. Johnson Worldwide, 175 F.3d at 989, see also Virginia Panel, 133 F.3d at 865–66. As to whether the “mounted to” connection may be an indirect connection, the parties agree that an indirect connection is permitted — a view that is amply supported by the intrinsic record, as discussed above. With regard to the types of movement that may occur between a “string guide” and a corresponding “limb,” the intrinsic record shows that that various types of movements (including no movement at all) are characterized as “mounted to.” Slight variations of “mounted to,” occurring in the intrinsic record, are helpful in understanding the claim language — particularly because the ’015 patent itself uses such a variant (“mounted . . . on”) to describe the very connection (between a “string guide” and a “limb”) that is elsewhere, and in claim 1, is described as “mounted to.” See Ex. 1001, 5:23–26.” slip op. at 22
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“Patent Owner’ sole argument — i.e., that Stanziale ’771 fails to teach the “mounted to” limitation — is based upon its construction of the “mounted to” limitation, which permits the “string guide” to be rotatable relative the corresponding “limb,” but permits no other type of relative motion. See PO Resp. 4, 13–14. As discussed above, we do not accept Patent Owner’s construction of the “mounted to” limitation. In Stanziale ’771, first and second pulleys 145, 146, and interconnecting pivot 147 (all three of which Petitioner maps to claim 1’s “string guide[s]”) are pivotally connected to a number of intermediate members (e.g., lever arms or pushing arms 32, connecting elements 27, and constraining member 29) which are, in turn, pivotally connected to elastic members 10 (which Petitioner maps to claim 1’s “limb[s]”). See Pet. 41–42 (citing Ex. 1012 7:9–17, 8:26–8:13, 11:8–9, 14:18–15:22, 16:24–25, 16:29, 17:2, 17:15–17, 17:24–27, 19:12–30, 20:32–21:16, Figs. 1–7; Ex. 1016 ¶¶ 177–179); see also Ex. 1012 11:3–7, 11:34–12:4, 12:10–17, 16:29–18:3, 18:22–19:30, Figs. 8, 9, 10a, 10b. Therefore, Stanziale ’771, in Petitioner’s mapping, teaches the “string guide[s]” connected indirectly to the “limb[s].” Per the construction of the “mounted to” limitation employed herein (“connected to, either directly or indirectly”), Petitioner establishes, by a preponderance of the evidence, that Stanziale ’771 teaches the “string guide[s]” “mounted to” the “limb[s],” as recited in claim 1 of the ’015 patent. Contrary to Patent Owner’s concerns (see Paper 47, 1), the indirect connection between Stanziale ’771’s “string guide[s]” and “limb[s]” is not “unbounded.” Rather, the connection disclosed by Stanziale ’771 is the type of indirect connection supported by the intrinsic record. See supra § II.B. Patent Owner’s contention that “a POSA would be disinclined to rely on [Stanziale ’771] as a reference for the improved crossbow design disclosed in Claim 1” is not persuasive. See PO Resp. 38 (citing Ex. 2029 ¶ 46). The test for anticipation is whether a prior art reference discloses each and every element recited in the claim, not whether one of ordinary skill in the art would have been inclined to rely on the reference. See Net MoneyIN, Inc., 545 F.3d at 1369.” slip op. at 32
- ExcludeMotion to exclude, deniedMixed
“Motions to exclude evidence are authorized under 35 C.F.R. § 42.64. Rule 42.64(b)(1) states: “Once a trial has been instituted, any objection [to evidence] must be filed within five business days of service of evidence to which the objection is directed.” Further, “[t]he objection must identify the grounds for the objection with sufficient particularity to allow correction in the form of supplemental evidence.” 35 C.F.R. § 42.64(b)(1). “A motion to exclude evidence must be filed to preserve any objection.” 35 C.F.R. § 42.64(c).” slip op. at 40
- Expert testimonyPatent owner expert creditedDecided for patent owner
“In the present proceeding, Petitioner proposed — and Patent Owner does not dispute (see PO Resp. 3) — the following definition of a person of ordinary skill in the art: A hypothetical POSA to which the ’015 Patent pertains would be a technical person who has at least some experience working in the field of archery, reviewing crossbows or engineering related to bows and/or crossbows, and is generally familiar with prior art crossbows. (Ex. 1016 ¶17.) Such a person would likely have at least a bachelor’s degree in mechanical engineering or, alternatively, would have several years of experience in the field of archery or engineering related to bows and/or crossbows. (Id.) Pet. 28. As discussed above, we adopt Petitioner’s description of a person of ordinary skill for the purposes of this Decision. See supra § II.A. Petitioner alleges various deficiencies in Mr. Teater’s background, education, and knowledge. Paper 39, 4–8. Nevertheless, Mr. Teater satisfies the definition, of a person of ordinary skill in the art, that Petitioner advanced. Specifically, Mr. Teater has reviewed crossbows for 14 years, encompassing the relevant priority date for the ’015 patent, during which time he wrote evaluations of various bows and crossbows, developed and published testing standards for crossbows, and served on the Archery Trade Association’s technical committee for standards and guidelines. Paper 41, 4 (citing Ex. 2029 ¶¶ 3, 4, 7). Accordingly, Mr. Teater satisfies Petitioner’s definition of “a technical person who has at least some experience working in the field of archery, reviewing crossbows or engineering related to bows and/or crossbows, and is generally familiar with prior art crossbows.” Pet. 28. Petitioner emphasizes that Mr. Teater “does not have a degree in mechanical engineering.” Paper 39, 4 (citing Ex. 2034, 1; Ex. 1034, 43:20–44:5). However, no degree of any kind is mandatory for satisfying Petitioner’s definition of a person of ordinary skill in the art. Indeed, Petitioner’s definition states that “[s]uch a person would likely have at least a bachelor’s degree in mechanical engineering or, alternatively, would have several years of experience in the field of archery or engineering related to bows and/or crossbows.” Pet. 28 (emphasis added). There is no dispute that Mr. Teater meets this standard. Petitioner raises various other issues that form no part of the definition that Petitioner advanced — for example, whether Mr. Teater has taught courses related to crossbows, whether he is named as an inventor on a” slip op. at 36
Patent outcomesUS 9,354,015 unpatentableClaim construction§ 102 anticipationcites PhillipsPatents in suitUS 9,354,015 - PTAB · Jun 13, 2024 · IPR2024-00269 · APJ Robert J Silverman · IPR · Institution
The Board instituted IPR on claims 1, 2, 4, 5, 7, 8, 10, 12, 17, and 18 based on both § 103 grounds, finding a reasonable likelihood of success.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes, and Weber does not dispute, that a person of ordinary skill in the art of the ’823 patent, at the time relevant for the analysis herein, would have possessed the following background and qualifications: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 13–14. Provisur’s proposed definition appears to be consistent with the problems and solutions addressed in the ’823 patent and the prior art of 3 US 2016/0023370 A1, pub. Jan. 28, 2016 (Ex. 1004, “Müller”). 4 US 2019/0329438 A1, pub. Oct. 31, 2019 (Ex. 1005, “GEA438”). 5 US 2009/0159631 A1, pub. June 25, 2009 (Ex. 1006, “DePoi”). record. Therefore, for the purposes of this Decision, we adopt Provisur’s characterization of the level of ordinary skill in the art.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Weber’s Preliminary Response does not manifest any claim construction dispute that would bear upon this Decision. Therefore, we need not expressly construe any claim terms at this preliminary stage. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)” slip op. at 7
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“[I]n evaluating the factors,” set forth in Fintiv, “the Board takes a holistic view of whether efficiency and integrity of the system are best served by denying or instituting review.” Fintiv 6 (emphasis added). In view of the following discussion of these factors, under the circumstances as they appear from the present record, the efficiency and integrity concerns, referenced in Fintiv, are best served by not exercising our discretion to deny the Petition without considering the merits. slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the petition and the preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons that follow, and solely for the purposes of this Decision, we determine that Grounds 1 and 2 of the Petition (as identified below) satisfy this standard.” slip op. at 15
Claim construction§ 103 obviousnessDiscretionary denialcites KSR · GrahamPatents in suitUS 11,331,823 - PTAB · Jun 13, 2024 · IPR2024-00258 · APJ Carl M Defranco · IPR · Institution
The Board instituted IPR on claims 2, 3, 9, 10, 12, 13, and 16–20, finding a reasonable likelihood that claims 2, 17, and 19 are obvious over Müller and Waffner.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Aside from operability, Weber does not further dispute Provisur’s showing as to how the asserted combination of Müller and Waffner renders obvious the subject matter of independent claims 2, 17, and 19. See Prelim. Resp. 14–24. After analyzing Provisur’s showing, including Provisur’s mapping of the claim elements to Müller and/or Waffner and its reasoning for why one of ordinary skill in the art would have been led to combine their respective teachings (as discussed above), we find that Provisur demonstrates a reasonable likelihood that at least independent claims 2, 17, and 19 are unpatentable as obvious over the combined teachings of Müller and Waffner. See Pet. 28–38 (claim 2), 38–42 (reason to combine), 47–52 (claim 17), 53 (claim 19). Thus, Provisur meets the threshold for institution. At this stage, Weber offers no response to Provisur’s challenge of dependent claims 3, 9, 10, 12, 13, 16, 18, and 20, except presumably to rely on its argument against Provisur’s challenge of their respective base claims 2, 17, and 19. See Prelim. Resp. 14–24. Because Provisur provides an obviousness challenge that satisfies the “reasonable likelihood” threshold with respect to at least the independent claims, we do not address the dependent claims in the absence of any rebuttal from Weber. Further analysis is best left for trial after full development of the record.” slip op. at 11
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied
“C. Discretionary Denial Under 35 U.S.C. § 314(a) Weber requests that we exercise our discretion under 35 U.S.C. § 314(a) to deny institution due to the advanced state of the parallel Missouri action. See Prelim. Resp. 3–13. Although Provisur argues that discretionary denial is not warranted (Pet. 73–77), it nonetheless submits a Sotera style stipulation (Ex. 1029) in an effort to resolve the issue.8 In light of Provisur’s Sotera stipulation, we will not discretionarily deny institution under § 314(a). See Director Memorandum, Interim Procedure for Discretionary Denials in AIA-Post Grant Proceedings With Parallel District Court Litigation, U.S. PATENT AND TRADEMARK OFFICE (June 21, 2022), at 3, 7.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“the art reasonably would have understood the advantage of incorporating Waffner’s air-permeable contact surface and vacuum chamber into Müller’s downstream buffer 12, as opposed to its upstream buffer 8, given that both prior art references emphasize the importance of controlling the infeed speed and tension of the interleaver material adjacent the cutting region where rapid acceleration and braking of the interleaver material may result in tearing and wrinkling. See Ex. 1004 ¶¶ 26, 48; Ex. 1006, 2:58–3:4, 6:50–56; see also Ex. 1003 ¶¶ 200–210 (addressing the teachings of Müller and Waffner in view of the existing knowledge in the art). Indeed, Provisur’s expert confirms that “[l]ike many interleaver devices known in the art, Müller discloses creating a buffer loop of web material upstream of the rollers that insert the web material into the cutting area,” and that “[i]t was known in the food slicing and interleaving industry that the tension of interleaver material fed to the cutting region from a loose loop must be controlled.” Ex. 1003 ¶¶ 199, 220. And, like Waffner, Müller describes buffer 12 in terms of being a “loop” buffer for controlling the infeed speed of the interleaver material into the cutting region. See Ex. 1004 ¶ 48 (“Provided downstream of the first buffer 8 is a further buffer 12, a loop here, which . . . preferably buffers only as much interleaver material as is needed for the ejection of an interleaver.”). In contrast, Müller’s buffer 8 is used only “in the event of a[n] emergency stop” for buffering “overrun of the reel.” Id. ¶ 33. Thus, based on the current record, we reject the notion that Provisur’s proposed modification of Müller’s buffer 12, which continuously controls the length of the loop near the cutting region, would have any effect on Müller’s buffer 8, which merely stops unraveling near the reel. Aside from operability, Weber does not further dispute Provisur’s showing as to how the asserted combination of Müller and Waffner renders obvious the subject matter of independent claims 2, 17, and 19. See Prelim. Resp. 14–24. After analyzing Provisur’s showing, including Provisur’s mapping of the claim elements to Müller and/or Waffner and its reasoning for why one of ordinary skill in the art would have been led to combine their respective teachings (as discussed above), we find that Provisur demonstrates a reasonable likelihood that at least independent claims 2, 17, and 19 are unpatentable as obvious over the combined teachings of Müller and Waffner. See Pet. 28–38 (claim 2), 38–42 (reason to combine), 47–52 (claim 17), 53 (claim 19). Thus, Provisur meets the threshold for institution.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur asserts that the claim terms should be construed “according to their plain and ordinary meanings as understood by [one of ordinary skill in the art] in view of the specification and prosecution history” and that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 18. Weber appears to agree, stating in the parallel Missouri action that “most of [Weber’s] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 1028, 5. There being no dispute, we need not expressly construe any claim terms at this stage of the proceeding, because we can decide the threshold question of institution without further construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (approving Board decision not to construe claim language where the construction is not material to the dispute).” slip op. at 6
Claim construction§ 103 obviousnessDiscretionary denialPatents in suitUS 10,647,013 - PTAB · May 31, 2024 · IPR2024-00235 · APJ Carl M Defranco · IPR · Institution
The Board instituted IPR on claims 1–6, 8, 10, and 14–16 based on a reasonable likelihood that claims 1 and 14 are anticipated by Young and obvious over Young and Norrie.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art typically would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. Because Provisur’s proposed definition is consistent with the level of skill described in the ’321 patent and the prior art of record, we adopt it here for purposes of institution.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Provisur asserts that the claim terms should be construed “according to their plain and ordinary meanings as understood by [one of ordinary skill in the art] in view of the specification and prosecution history” and that “[n]o terms require an explicit construction to resolve the unpatentability 4 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 5 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 6 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 7 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). controversy between the parties here.” Pet. 13. Weber appears to agree, its counsel stating in the parallel Missouri action that “most of [Weber’s] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 1028, 5. There being no dispute, we need not expressly construe any claim terms at this stage, because we can decide the threshold question of institution without further construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (approving Board decision not to construe claim language where the construction is not material to the dispute).” slip op. at 5
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“Weber requests that we deny institution under 35 U.S.C. § 314(a) due to the advanced state of the parallel Missouri action. See Prelim. Resp. 6– 17. Provisur disputes that discretionary denial is warranted (Pet. 73–77), but nonetheless submits a Sotera stipulation (Ex. 1029) in an effort to resolve the issue.8 In light of Provisur’s Sotera stipulation, we will not discretionarily deny institution under § 314(a). See Director Memorandum, Interim Procedure for Discretionary Denials in AIA-Post Grant Proceedings With Parallel District Court Litigation, U.S. PATENT AND TRADEMARK OFFICE (June 21, 2022), at 3, 7.” slip op. at 6
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“We disagree with Weber’s position, at least on the current record. Instead, we find that Provisur presents sufficient evidence that Young anticipates all elements of independent claims 1 and 14, including the disputed limitation requiring “automatic determination of the thickness of the fat cover.” In particular, Young’s imaging system 190 includes multiple cameras, including top plan camera 196, end view camera 197, and fat line camera 198, as well as controller 172 and real-time image processor 194. Ex. 1004, 17:34–59, 18:46–56, Figs. 2, 13. As described by Young, top plan camera 196 is primarily used to obtain “physical dimensions and characteristics” of the meat product, end view camera 197 is primarily used to determine the “height” of meat product and “to create a clear delineation along the top edge of the end” of the meat product, whereas fat line camera 198 is primarily used to determine the fat/lean separation line of the meat product. See id. at 17:59–18:39. Those disclosures by Young clearly contemplate determining specific dimensions of the meat product, and not simply identifying the fat/lean separation line, as Weber suggests. See Prelim. Resp. 19. To determine the “thickness” of the fat cover, Young’s imaging system has image processing routine 240, which “generates a fat/lean separation line and an edge line . . . representing the outer surface of the pork side proximate the fat/lean line” and uses those lines to calculate “the height, width, and length of the [meat product].” Ex. 1004, 23:12–25, 24:10–22. As part of routine 240, controller 172 uses that information to set the cutting profile of knife assembly 100 “so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Id. at 18:35–39 (emphasis added). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the meat, after cutting, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphasis added)). Young’s disclosure that image processing routine 240 determines a “fixed distance” from the loin/fat separation line at which to cut the meat product undoubtedly corresponds to the claimed “determination of the thickness of the fat cover . . . in a contactless manner.” See Ex. 1003 ¶¶ 104–112. Indeed, Young discloses specific dimensions for the desired optimum fat cover to remain on the meat—“a fixed distance (preferably 0.1 inch) from the fat/lean separation line 6.” Ex. 1004, 20:55–63.” slip op. at 8
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialPatents in suitUS 8,529,321 - Millerknoll, Inc. v. Aaron DejuleInstitution deniedPTAB · Mar 22, 2024 · IPR2023-01428 · APJ Robert J Silverman · IPR · Institution
The Board denied institution for claims 1–10, 14, 15, and 18–22 because Petitioner did not identify corresponding structure for the § 112(f) adjusting assembly limitation.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“Under these circumstances, the Petition does not establish a reasonable likelihood of unpatentability for claim 1. See Samsung Elecs. Co., Ltd. v Power2B Inc., IPR2022-01378, Paper 12 at 15, 17 (PTAB March 15, 2023) (“Because Petitioner has not identified structure corresponding to the functions recited in claims 1 and 5, we cannot ascertain the differences between the claimed invention and the asserted prior art, as required [to evaluate obviousness]. . . . Accordingly, we conclude that Petitioner has not demonstrated a reasonable likelihood that it would prevail in showing claims 1 and 5 are unpatentable under 35 U.S.C. § 103(a) as obvious over Bird and Ishii.”); HTC Corp. v Lemaire Illumination Techs., LLC, IPR2019-00092, Paper 7 at 20 (PTAB Apr. 29, 2019) (“Petitioner . . . fails to identify structure described in the Specification of the ’266 patent that corresponds to the claimed function as is required by 37 C.F.R. § 42.104(b)(3) . . . . Consequently, Petitioner also fails to explain how that corresponding structure or an equivalent thereof is met by its proposed combination of [prior art references].”); ZTE Corp. v. Maxell, Ltd., IPR2018-00235, Paper 9 at 11 (PTAB June 1, 2018) (“Petitioner has not satisfied the claim construction requirement set forth in 37 C.F.R. § 42.104(b)(3) with respect to certain limitations in independent claims 1, 6, and 10. Based on this deficiency in the Petition, which affects all of the challenged claims, we deny institution of inter partes review.”); Unified Patents Inc. v. Blackbird Tech LLC, IPR2017-01525, Paper 11 at 14 (PTAB Dec. 1, 2017) (“Petitioner does not ‘identify the specific portions of the specification that describe the structure, material, or acts corresponding to each claimed function,’ as required by our Rules (37 C.F.R. § 42.104(b)(3)), to enable us to determine if the asserted prior art teaches such structure. Thus, Petitioner fails to demonstrate a reasonable likelihood of prevailing in its challenge to independent claims 2, 7, and 10 as well as its challenge to claims 11, 13, 16, and 19.”); Panel Claw, Inc. v. SunPower Corp., IPR2014-00386, Paper 7 at 9–10 (PTAB June 30, 2014) (Petitioner’s failure to identify corresponding structure for a means-plus-function limitation warranted denial of institution for all claims that included that limitation). Because the claims 2–10, 14, 15, and 18–22 depend, directly or indirectly, from claim 1, Petitioner’s challenge to these claims fails for the same reasons.” slip op. at 27
- Skill levelSkill level petitioner adoptedDecided for petitioner
“person of ordinary skill in the art. See Phillips, 415 F.3d at 1313. Petitioner contends that person of ordinary skill in the art to which the ’498 patent pertains “would have had a bachelor’s degree in industrial design, mechanical engineering, and/or a related field, and at least 2–3 years of experience designing furniture.” Pet. 8 (citing Ex. 1108 ¶ 29). Patent Owner “forgoes offering a competing definition of the level of ordinary skill,” at the current stage of this proceeding, stating that “under Petitioner’s definition of the level of ordinary skill in the art, Petitioner’s challenges fail to establish a reasonable likelihood of prevailing as to any claim of the ’498 Patent.” Prelim. Resp. 7. Accordingly, for the purposes of this Decision, and in view of the parties’ representations, we adopt Petitioner’s description of the relevant level of skill in the art, which appears to be consistent with the level of skill reflected in the ’498 patent and the asserted prior art. See Okajima, 261 F.3d at 1355.” slip op. at 18
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“‘[a]djusting assembly’ is not a recognized term of art in the field of the ’498 Patent” and “[a]s used in the claims of the ’498 Patent, it should be construed as a means-plus-function (‘MPF’) claim element under 35 U.S.C. § 112(f).” Pet. 9 (citing Ex. 1108 ¶ 47). Petitioner bases this assertion on its expert’s opinions that “claim 1 does not recite sufficient structure for performing th[e] function” recited in the “adjusting assembly” limitation and that a person of ordinary skill in the art “would not consider ‘adjusting assembly’ to refer to any specific structure.” Id. (citing Ex. 1108 ¶ 52); see also id. at 10 (citing Ex. 1108 ¶¶ 54–59) (“Nor do the claims otherwise recite sufficient structure for providing the claimed function.”) Further, Petitioner contends that “[c]laim 1 uses ‘adjusting assembly’ as a ‘nonce’ term that operates as a substitute for ‘means’ to claim a function.” Id. at 10 (citing MTD Prods. Inc. v. Iancu, 933 F.3d 1336, 1341–45 (Fed. Cir. 2019) (holding “mechanical control assembly” operated as nonce term)). For its part, “Patent Owner agrees that means-plus-function treatment is appropriate for the ‘adjusting assembly,’” although taking this position “[f]or purposes of this proceeding only.” Prelim. Resp. 8 n.5. Based on the current record, we agree with the parties’ positions that the “adjusting assembly” limitation of the ’498 patent should be construed according to 35 U.S.C. § 112(f). Although the word “means” does not appear in the limitation, the claim language itself does not recite structure that, per the recited function, “cooperat[es] between the first component and the at least second component” and “changes [the] magnitude” of “the force required to be applied in the second manner to reconfigure the apparatus and move the second component relative to the first component,” “as an incident of the force being applied in the first manner changing in magnitude.” In other words, claim 1 appears to lack sufficient structure for performing the stated function of the “adjusting assembly.” See Williamson, 792 F.3d at 1348. Mr. Koepke’s opinion, which is unrebutted at this point, that the term “adjusting assembly” would not connote any specific structure, to a person of ordinary skill in the art, at the relevant time (see Ex. 1108 ¶ 52), supports our conclusion that 35 U.S.C. § 112(f) applies to the “adjusting assembly” limitation. slip op. at 19
- BurdenDenied
“As to the purportedly corresponding structure, in the ’498 patent Specification, Petitioner identifies only two structures for performing the recited function of the “adjusting assembly”: a “tilting spring” and a “weighing spring.” See Pet. 10–14. Petitioner characterizes a “tilting spring” as “a spring structure that” slip op. at 21
Claim constructioncites Phillips · KSR · GrahamPatents in suitUS 10,292,498 - Millerknoll, Inc. v. Aaron DejuleInstitution deniedPTAB · Mar 22, 2024 · IPR2023-01427 · APJ Richard H Marschall · IPR · Institution
Institution was denied because the petition did not show a reasonable likelihood that Schmitz or Takamatsu anticipates any challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a) (2022). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the petition and the preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons that follow, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing with respect to any of the challenges in the Petition. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesOther
“may be expressed as a means or step for performing a specified function . . . and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.” 35 U.S.C. § 112(f). The use of the term “means” creates a rebuttable presumption that 35 U.S.C. § 112(f) applies and, conversely, the absence of the term “means” creates a rebuttable presumption that this statutory mandate does not apply. Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (en banc, in relevant part). These presumptions can be overcome, however, if the claim limitation “fails to ‘recite sufficiently definite structure’ or else recites ‘function without reciting sufficient structure for performing that function.’” Id. (citing Watts v. XL Sys., Inc., 232 F.3d 877, 880 (Fed. Cir. 2000). Indeed, as the Federal Circuit has emphasized, the essential inquiry is not merely the presence or absence of the word “means” but whether the words of the claim are understood by persons of ordinary skill in the art to have a sufficiently definite meaning as the name for structure.” slip op. at 12
- Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownOther
“on incorrect aspects of Petitioner’s proposed construction because Petitioner’s faulty construction fatally undermines Petitioner’s anticipation challenges. We agree with Patent Owner that Petitioner’s construction fails to give adequate weight, or any weight, to the “plurality of gears” aspect of the “adjusting assembly” limitation. Petitioner acknowledges the “plurality of gears” language when arguing that the presence of this structure in the claim does not prevent that the “adjusting assembly” limitation from being construed as a means-plus-function limitation, but Petitioner does not include the functional requirements of the gears in its identification of the claimed function or identify the gears as part of the structure in the Specification that performs the claimed function. See Pet. 13–17. Both of these approaches are erroneous and lead to an incorrect construction of the “adjusting assembly” limitation. The adjusting assembly limitation requires “an adjusting assembly comprising a plurality of gears that cooperate and move relative to each other as an incident of the seat moving from the first position into the loaded position configured to thereby increase a resistance to changing of the angular orientation of the back rest from the starting angular position.” Ex. 1001, claim 1 (emphasis added). Accordingly, the plain language of the claim requires an adjusting assembly that includes gears that perform a certain function (“cooperate and move relative to each other . . .”). Petitioner’s identified function focuses on the “increase a resistance” functional language and improperly omits the functional language associated” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The level of skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). “This reference point prevents . . . factfinders from using their own insight or, worse yet, hindsight, to gauge obviousness.” Id. Factors pertinent to a determination of the level of ordinary skill in the art include: (1) educational level of the inventor; (2) type of problems encountered in the art; (3) prior art solutions to those problems; (4) rapidity with which innovations are made; (5) sophistication of the technology; and (6) educational level of workers active in the field. Env’t Designs, Ltd. v. Union Oil Co., 713 F.2d 693, 696–697 (Fed. Cir. 1983) (citing Orthopedic Equip. Co. v. All Orthopedic Appliances, Inc., 707 F.2d 1376, 1381–82 (Fed. Cir. 1983)). Not all such factors may be present in every case, and one or more of these or other factors may predominate in a particular case. Id. Moreover, these factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art. Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). In determining a level of ordinary skill, we also may look to the prior art, which may reflect an appropriate skill level. Okajima, 261 F.3d at 1355. Petitioner contends that one of ordinary skill in the art “would have had a bachelor’s degree in industrial design, mechanical engineering, and/or a related field, and at least 2–3 years of experience designing furniture.” Pet. 12 (citing Ex. 1012 ¶¶ 22–23). Patent Owner states that “for the purposes of this Preliminary Response only, Patent Owner forgoes offering a competing definition of the level of ordinary skill.” Prelim. Resp. 7. For purposes of this Decision, we adopt and apply Petitioner’s proposed level of ordinary skill in the art, which we view as consistent with the level of skill reflected in the ’753 patent and the asserted prior art.” slip op. at 10
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 10,893,753 - PTAB · Nov 29, 2023 · IPR2023-00918 · APJ Robert J Silverman · IPR · Institution
The Board instituted IPR on claims 1–29 and all asserted grounds, finding at least Grounds 7–13 met the reasonable-likelihood threshold.
RulingsInstitution decision- Other 314aDenied
“The present Petition identifies thirteen Grounds, which employ a total of seven prior art references. See Pet. 1–2. Patent Owner contends that the Petition’s use of alternative combinations, within particular Grounds, results in “over twenty (20)” distinct bases for the invalidity of one or more claims. Prelim. Resp. 6. As Patent Owner concedes (id.), this is a far cry from the situation in Adaptics, where the Board confronted “hundreds of possible combinations.” Adaptics, 2019 Pat. App. LEXIS 4775, *25–*26. In addition, although the use of alternative prior art bases and string citations, in a petition, may present various challenges, we do not regard the present Petition as exceeding reasonable limits of particularity and specificity. Further, the alleged discrepancies in how the Petition “pars[es] the elements” of claim 28 (Prelim Resp. 7) do not appear to have impaired Patent Owner’s analysis thereof. See id. at 19–26, 39–43.” slip op. at 11
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“For the reasons provided below, we determine that Petitioner demonstrates a reasonable likelihood that it would prevail with respect to at least one claim of the ’620 patent challenged in the Petition. Specifically, at least Grounds 7–13 of the Petition satisfy this standard for instituting inter partes review.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“However, Petitioner, with reference to the Goldberg Declaration (Ex. 1002), argues that a sufficient reason exists, for combining Felt (Verizon) with Kerr, because “Kerr’s interfacing allows registration of the assets, and provides ease and control in human-machine interfacing,” which would have supported the distribution of targeted content. Pet. 14–15 (citing Ex. 1005 ¶ 96, Ex. 1002 ¶¶ 107–109). At the present stage of the proceeding, it appears that Petitioner has identified a sufficient reason to combine Felt (Verizon) with Kerr.” slip op. at 26
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“As to the issue of whether Muhire constitutes non-analogous art, Patent Owner identifies the proper inquiries, either of which would establish a reference as analogous art: (1) whether the reference is from the same field of endeavor as the claimed invention; and (2) whether the reference is reasonably pertinent to the problem faced by the inventor. Prelim. Resp. 33–34 (citing Bigio, 381 F.3d at 1325). However, Patent Owner does not analyze either inquiry, but merely states: “The Petition provides no evidence why a POSITA would look to making such a combination with the location tracking of Verizon; rather only a discussion of using separate layers is provided.” Id. at 34 (citing Pet. 35, Ex. 1002 ¶ 163). By contrast, Dr. Goldberg regards Muhire as being “focused in [sic] similar sector of technology” as the ’620 patent. Ex. 1002 ¶ 163. Further, Muhire addresses the delivery of customized advertising media content to online electronic devices (see Muhire ¶¶ 32–46) — a subject that could be regarded as the field of endeavor of the ’620 patent, which “relates to an online platform . . . for managing and/or delivering location and time based advertisements” (Ex. 1001, 1:20–24). Therefore, at this stage of the proceeding, we are not persuaded on the current record that Muhire constitutes non-analogous art.” slip op. at 30
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 10,621,620
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.