• CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentable
  PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

  Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

    “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

  Patent outcomesUS 10,647,861 not shown unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 10,647,861
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Instituted
  PTAB · Apr 25, 2025 · IPR2024-01463 · APJ David Cotta · IPR · Institution

  The Board instituted inter partes review of claims 1–10 on all asserted grounds, finding a reasonable likelihood of success on at least one claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “predict how the district court in the related district court litigation will proceed because the court may determine whether or not to stay any individual case . . . based on a variety of circumstances and facts beyond our control and to which the Board is not privy.” Sand Revolution II LLC v. Cont’l Intermodal Grp., IPR2019-01393, Paper 24, 7 (PTAB June 16, 2020) (informative). We decline to speculate on how the court may rule on the pending motion to stay. Accordingly, this factor is neutral.” slip op. at 13

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Under 35 U.S.C. § 314(a), inter partes review may not be instituted unless the Petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Petitioner has established a reasonable likelihood of prevailing on its assertion that at least one of the challenged claims is unpatentable based on the grounds advanced here. We decline to deny the Petition on a discretionary basis as requested by Patent Owner. Thus, for reasons explained below, we institute inter partes review of claims 1–10 of the ’706 patent.” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted

    “TC(220), and ΔRz/Ra are result effective variables and that copper foils having ΔPD, TC(220), and ΔRz/Ra values that meet the values recited in claim 1 have advantageous properties. See, e.g., Ex. 1005 ¶ 45 (Kim ’761, disclosing that preferably the “difference in peak count roughness Rpc between the shiny surface . . . and the matte surface . . . of the electrolytic copper foil . . . is preferably 60 or less” because “when the difference in the peak count roughness Rpc exceeds 60 capacity maintenance of the secondary battery is deteriorated.”);15 Ex. 1007, 3:16–23, 4:14–23 (Cheng, disclosing that the foils of Cheng’s invention have (220) and (311) surfaces that provide increased elongation and that solve a high roughness problem that rendered traditional products unsuitable for use in a lithium ion secondary battery), 10:27–34 (Cheng, disclosing that in the foils of Cheng’s invention “the roughness difference between both sides was extremely small” and thus “it was . . . not easy for the electrolytic copper foil to break or fracture during the charging-discharging cycles and the life of a battery is thus increased”), Tables 3 & 4 (Cheng, disclosing embodiments and comparative examples with TC(220) values meeting the requirements of claim 1); Ex. 1008, 6:36–44 (Wolski, disclosing that “the surface roughness Rz at the matte side of the untreated copper foil of the present invention is the same or smaller than the surface roughness Rz at the shiny side . . . so that the surface treated copper foil . . . becomes more low-profiled . . . whereby it becomes a foil having a large etching factor”), 9:1–29 & Table 2 (Wolski, disclosing 15 Dr. Randall testifies that “Kim ’761’s peak count roughness Rpc corresponds to the peak density PD of the ’706 patent.” Ex. 1003 ¶ 52. At this stage in the proceeding, this testimony is unrebutted. 38 embodiments meeting the ΔRz/Ra of claim 1, describing them as having “matte side roughnesses” that are “sufficiently small,” and as having “excellent” “high temperature elongation characteristics”), 11:37–41 (Wolski, describing comparative examples as having “large” matte side roughnesses “whereby etching factors are not good”), 12:12–27 (Wolski, teaching that “as compared with a conventional untreated copper foil, both surfaces of the untreated copper foil obtained by [Wolski’s] invention are flat” resulting in a low profile foil that has “excellent elongations at room temperature and high temperature and also high tensile strength”). The teachings in the prior art support the presently unrebutted testimony of Dr. Randall explaining why the POSA would have been motivated to modify Kim ’761’s copper foil to have the claimed TC(220) and ΔRz/Ra. Ex. 1003 ¶¶ 66–68, 71–74; Pfizer Inc., v. Sanofi Pasteur Inc., 94 F.4th 1341, 1348 (Fed. Cir. 2024) (“Where [a gap in prior art] includes a parameter not necessarily disclosed in the prior art, it is not improper to consider whether or not it would have been recognized as result-effective. If so, then the optimization of that parameter is ‘normally obvious.’”). Accordingly, we are not persuaded by Patent Owner’s argument that Petitioner failed to articulate a sufficient motivation to combine the references. To the contrary, the preliminary record presents a strong showing that the POSA would have been motivated to combine the references in the manner described in the Petition.” slip op. at 38

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “At this stage of the proceeding, Patent Owner does not contest Petitioner’s definition of the level of skill in the art. Prelim. Resp. 4 (“For purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art”). Petitioner’s definition appears to be consistent with the field of the invention reflected in the prior art of record and the disclosure of the ’706 patent. Accordingly, for purposes of this Decision, we adopt Petitioner’s proposed definition of the person of ordinary skill in the art.” slip op. at 21

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,591,706
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14

  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 11,346,014
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentable
  PTAB · Mar 25, 2025 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Final written decision

  Claims 1–7 are unpatentable as obvious over Yoshida and Saxler; the Board did not reach the alternative grounds.

  RulingsFinal written decision

  • Skill levelOther

    “In light of the record before us, we determine that we do not need to reach a specific finding regarding the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “In the Institution Decision, we declined to adopt Petitioner’s proposed construction of the “side surfaces” limitation and determined that it was not necessary to further construe this term because “[t]he parties do not dispute that the language ‘side surfaces extending horizontally’ encompasses a gate material with sloped side surfaces as depicted in Figure 5 of the ’335 patent.” Inst. Dec. 11–16 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We invited the parties to address this limitation further during the course of this trial, but neither party provided additional evidence or argument regarding the “side surfaces” limitation. Inst. Dec. 16; see generally PO Resp.; Reply; Sur-reply. Accordingly, we maintain our determination from the Institution Decision that we do not need to construe the “side surfaces” limitation. Inst. Dec. 15– 16.” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “This evidence, particularly the language in the ’335 patent itself, undermines Patent Owner’s argument that “[t]he process for forming gate ledges using separate masks instead of the self-aligned process disclosed in the ’335 patent cannot produce ledges that are ‘substantially symmetric.’” PO Resp. 39 (emphasis added); see also PO Resp. 42–43 (arguing that a gate structure with ledges having substantially equal widths is “not achievable” without using a single photo-mask process). We have considered the evidence presented by Patent Owner and Dr. Schubert in support of Patent Owner’s arguments. PO Resp. 38–43; Ex. 2005 ¶¶ 49–51. We, however, are unable to discern sufficient evidence supporting a conclusion that using separate masks cannot produce ledges that are substantially symmetric, particularly when the ’335 patent suggests otherwise. See Ex. 1001, 4:60– 63 (referring only to the “possibility of misalignment”). Even if, as Patent Owner and Dr. Schubert contend, misalignment “naturally” occurs when using a two-mask process, that does not foreclose the possibility that the” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “It is well settled that “[a] reference does not teach away . . . if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit or otherwise discourage’ investigation into the invention claimed.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Furthermore, “teaching that a composition may be optimal or standard does not criticize, discredit, or otherwise discourage” slip op. at 31

  Patent outcomesUS 10,312,335 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,312,335
• Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• LG Energy Solution, Ltd. v. Molecular Rebar Design, LLCInstituted
  PTAB · Dec 16, 2024 · IPR2024-01012 · APJ Julia Heaney · IPR · Institution

  The Board instituted IPR on claims 1–16 and all asserted grounds, finding a reasonable likelihood of unpatentability and declining Fintiv discretionary denial.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition in view of the record at this stage, we determine that Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one claim challenged in the Petition. We also determine that the arguments and evidence of record do not support discretionary denial of the Petition under 35 U.S.C. § 314(a). Accordingly, we grant institution of an inter partes review of all claims and all grounds asserted in the Petition.1” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted

    “parties on the present record, we are persuaded Petitioner sufficiently shows the combination of Bosnyak-392 and Son teaches or suggests all of the limitations of claim 1, and sufficiently explains how a person of ordinary skill in the art would have used Bosnyak-392’s teaching of using exfoliated, open-ended carbon nanotube fibers having two different aspect ratios in a composition with improved electrical and mechanical properties, with Son’s implementation of a specific bimodal distribution of aspect ratios, to arrive at the composition of claim 1 with a reasonable expectation of success. We do not find persuasive Patent Owner’s arguments that Bosnyak- 392 teaches away from using nanotubes with a lower aspect ratio, or that Bosnyak-392 has an objective of maintaining longer nanotubes. See Prelim. Resp. 5–9. Patent Owner’s arguments appear to be based on a mischaracterization of Bosnyak-392, which read as a whole, discusses methods for exfoliating carbon nanotubes and physical properties of exfoliated nanotubes, such as length and diameter, that are not apparent when the nanotubes are aggregated. E.g., Ex. 1005 ¶ 37. Although Bosnyak-392 recognizes that nanotube exfoliating techniques tend to reduce nanotube length (see Ex. 1003 ¶ 28), it does not discourage the use of shorter nanotubes. Rather, it recognizes that using short and long nanotubes together can produce a composite with improved electrical and mechanical properties. See id. (citing Ex. 1005 ¶ 73). See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (a reference does not teach away from a claimed invention unless it “criticizes, discredits, or otherwise discourages” the claimed solution).” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We do not find persuasive Patent Owner’s arguments that Bosnyak- 392 teaches away from using nanotubes with a lower aspect ratio, or that Bosnyak-392 has an objective of maintaining longer nanotubes. See Prelim. Resp. 5–9. Patent Owner’s arguments appear to be based on a mischaracterization of Bosnyak-392, which read as a whole, discusses methods for exfoliating carbon nanotubes and physical properties of exfoliated nanotubes, such as length and diameter, that are not apparent when the nanotubes are aggregated. E.g., Ex. 1005 ¶ 37. Although Bosnyak-392 recognizes that nanotube exfoliating techniques tend to reduce nanotube length (see Ex. 1003 ¶ 28), it does not discourage the use of shorter nanotubes. Rather, it recognizes that using short and long nanotubes together can produce a composite with improved electrical and mechanical properties. See id. (citing Ex. 1005 ¶ 73). See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (a reference does not teach away from a claimed invention unless it “criticizes, discredits, or otherwise discourages” the claimed solution).” slip op. at 18

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “Having considered both sides’ arguments as to Fintiv factors 2 and 3, we determine that the considerations of these factors weigh against exercising discretionary denial. Neither party directs us to any substantive order issued by the district court in the parallel litigation, which indicates the court has not yet considered claim construction or potential invalidity of the ’282 patent. The Markman hearing will not occur until June 2025, and the expert discovery cutoff is not until August 2025. Ex. 2002. Thus, although the parties have begun discovery as to invalidity issues, much further work remains in the parallel district court litigation. We also take into account Petitioner’s prompt filing of the Petition, as weighing against exercising discretionary denial. See Fintiv 11 (“If the evidence shows that the petitioner filed the petition expeditiously, such as promptly after becoming aware of the claims being asserted, this fact has weighed against exercising the authority to deny institution . . . .”).” slip op. at 34

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 10,608,282
• LG Energy Solution, Ltd. v. Molecular Rebar Design, LLCInstituted
  PTAB · Dec 16, 2024 · IPR2024-01011 · APJ Jeffrey W Abraham · IPR · Institution

  The Board instituted IPR on claims 1–5 under all asserted grounds, finding a reasonable likelihood of prevailing on at least one claim and no basis for discretionary denial.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Having considered the arguments and evidence set forth by Petitioner and Patent Owner, we determine that the information presented in the Petition demonstrates a reasonable likelihood that Petitioner would prevail on at least one of the challenged claims of the ’924 patent. We also determine that the arguments and evidence of record do not support discretionary denial of the Petition under 35 U.S.C. § 314(a). Accordingly, we institute an inter partes review as to all of the challenged claims of the ’924 patent on all of the grounds of unpatentability set forth therein.” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner

    “Although the parties appear to agree that this factor is neutral, we note that a district court denial of a motion to stay without prejudice, accompanied by an indication that the district court would consider a renewed motion, “suggests the district court may be willing to avoid duplicative efforts and await the PTAB’s final resolution of the patentability issues raised in the petition before proceeding with the parallel litigation.” Fintiv at 6–7. “This fact has usually weighed against exercising authority to deny institution.” Id. (also noting that factors 2 and 3 are relevant to how much weight to give to the court’s willingness to reconsider a stay); see also T-Mobile, Paper 16 at 12 (noting that a stay was unlikely in that case given the proximity of the trial date to the entry of the institution decision). In view of the forgoing, we determine that Fintiv factor 1 weighs against exercising our authority to deny institution.” slip op. at 39

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had at least a Master’s degree in materials science, chemistry, chemical engineering, a field relevant to polymer science and engineering, or the equivalent, and at least three years of experience in nanomaterials, electrochemistry, batteries, or polymer related activities” and that “[a]dditional work experience can compensate for less formal education, and vice versa.” Pet. 8 (citing Ex. 1003 ¶ 11). For purposes of its Preliminary Response, Patent Owner “does not dispute the Petition’s definition of [the] level of ordinary skill in the art.” Prelim. Resp. 2. On this record, we preliminarily adopt Petitioner’s definition of the person of ordinary skill in the art because it appears consistent with the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner argues that “no formal claim constructions are necessary.” Pet. 9. Patent Owner contends that all claim terms should be interpreted “in accordance with their ordinary and customary meaning.” Prelim. Resp. 2. Upon review of the record, we determine that no claim terms require express construction for purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 8,968,924
• Intel Corporation v. Besang Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

  The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Micron Technology, Inc. / Micron Semiconductor Products, Inc. et al. v. Besang Inc.No claims unpatentable
  PTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40

  • Expert testimonyPatent owner expert creditedOther

    “We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Nespresso USA, Inc. v. K-Fee System GmbHAll claims unpatentable
  PTAB · Sep 10, 2024 · IPR2023-00502 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1–16 are unpatentable as obvious over the combined disclosures of Yoakim, Jarisch, and Rapparini.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner

    “To obtain the benefit of the filing date of an earlier application, Patent Owner bears the burden of producing evidence to establish where each limitation of the challenged claims is disclosed in a single priority application. Studiengesellschaft Kohle, 112 F.3d at 1564; NTP, 654 F.3d at 1276. Petitioner identifies limitations of the challenged claims that are missing from each individual German priority application. Pet. 39–42. Patent Owner responds with no evidence or arguments suggesting that the identified limitations are disclosed in a single application. Resp. 10–12. On this record, no challenged claim is entitled to the benefit of the filing date of any of the three German priority applications; therefore, Jarisch qualifies as prior art under at least 35 U.S.C. § 102(e).” slip op. at 19

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “In other words, even if we accept that Dr. Howle has some experience designing medical devices and components, and that those experiences represent work designing products similar to mechanical beverage systems, Patent Owner fails to direct the Board to evidence sufficient to establish that this experience, in the aggregate, amounts to “at least five years” or involved “experience with sensors for recognizing identifiers.” Dec. 8 (adopting Patent Owner’s own proposed definition of ordinary skill in the art); see Sur-reply 3 (citing Ex. 1066, 34:16–35:9; Ex. 1067, 101:3–12, 102:30– 104:9; Ex. 2017 ¶¶ 3, 4) (failing to establish adequately, if at all, how Dr. Howle’s qualifications include the requisite minimum five-year period of relevant design experience). Accordingly, we determine that Dr. Howle is not qualified to offer expert testimony from the perspective of a person having ordinary skill in the art in this proceeding.12 Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1376–78 (Fed. Cir. 2022). The Federal Circuit has made plain that, “[t]o offer expert testimony from the perspective of a skilled artisan in a patent case,” including the issue of patent “validity,” the “witness must at least have ordinary skill in the art.” 12 To be clear, we are not saying that a witness supplying expert opinions must have satisfied the requirements of the level of ordinary skill in the art on or before the priority date of the challenged patent, which Patent Owner seems to understand. See Sur-reply 4–5. Instead, we evaluate whether Dr. Howle had at least the requisite qualifications of a person having ordinary skill in the art by the time he rendered his opinions. Osseo Imaging, LLC v. Planmeca USA, Inc., Appeal No. 2023-1627, slip op. at 7 (Fed. Cir. Sept. 4, 2024) (“[A]n expert can acquire the necessary skill later and develop an understanding of what a person of ordinary skill knew at the time of the invention,” however, where “the expert was not a person of ordinary skill at the time of the invention may well be used during cross-examination to undermine the credibility of the expert.”); see id., slip op. at 5–6 (affirmatively quoting Kyocera). Id. (Board’s emphasis). “Without that skill, the witness’[s] opinions are neither relevant nor reliable.” Id. at 1377. “‘Admitting testimony from a person . . . with no skill in the pertinent art serves only to cause mischief and confuse the factfinder.’” That testimony would ‘amount[ ] to nothing more than advocacy from the witness stand.’” Id. (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1362, 1364–65 (Fed. Cir. 2008)). Alternatively, even if we accept that Dr. Howle possesses “at least five years” of relevant design experience, on this record, we agree with Petitioner that his opinions are entitled to less weight than those of Petitioner’s witness, Mr. Jobin. Reply 27. Unlike Dr. Howle, Mr. Jobin is a designer by profession, with more than 30 years of industry experience. Reply 27 (citing Ex. 1003 ¶¶ 5–30). For example, Mr. Jobin designed a home-based beer dispensing system utilizing cartridge identification technologies. Id. (citing Ex. 1003 ¶ 24). Mr. Jobin also “has substantial experience with sensors for recognizing identifiers.” Id. (citing Ex. 1003 ¶ 19; Ex. 1072, 3712–19, 67:22–70:19). Dr. Howle, by contrast, “has never designed a beverage machine.” Reply 22; see generally Sur-reply (declining to contest that assertion).13” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “In Petitioner’s contrary view, Jarisch teaches how to move a code in a centrifugal brewing system to the bottom of the flange and how to configure a light-conductive material so that the detector’s light source will reach the bottom of the flange. Pet. 45–46; Reply 21–22 (Ex. 1003 ¶¶ 194–195; Ex. 1005 ¶¶ 82–84, Fig. 5). Although Figure 61 of Yoakim discloses a flare in its brewing chamber, bodily incorporation is not required, and we are directed to no persuasive argument or evidence that Yoakim could not be configured with a straight chamber, as depicted in Figure 5 of Jarisch. We credit the testimony of Mr. Jobin that a person of ordinary skill in the art would have sought to place the code at the bottom of the flange and would have had a reasonable expectation of success in so doing. Ex. 1003 ¶ 184. For reasons explained above, we assign little or no weight to Dr. Howle’s conflicting testimony because he has little or no experience designing a mechanical beverage system or similar product. See supra 10– 16. Petitioner lays out persuasive reasons why Dr. Howle’s testimony, on this particular point, is “conclusory” and rests on “bodily incorporation” of the references. Reply 24; see id. at 22–24 (pointing out with particularity fundamental flaws in Dr. Howle’s opinions); In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“It is well-established that a determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.”); In re Nievelt, 482 F.2d 965, 968 (CCPA 1973) (“Combining the teachings of references does not involve an ability to combine their specific structures.”). In addition, Patent Owner contends that Yoakim requires that the capsule holder be capable of receiving a set of multiple volume capsules and that there is a “snug fit” to avoid “unbalances.” Sur-reply 8 (citing Ex. 1004 ¶¶ 205, 479, 484, 507, 512). According to Patent Owner, Petitioner does not explain adequately how the use of Jarisch’s “straight chamber” with a capsule holder that does not engage with the side wall of the capsule would allow insertion of multiple volume capsules or permit a “snug fit” in the modified device of Yoakim. Id. at 8–9. Patent Owner’s view that Yoakim discloses the use of certain capsules which might not fit into a device with Jarisch’s non-flared structure is ineffective to undercut the sufficiency of Petitioner’s showing on this point. Petitioner is not seeking a bodily incorporation of Yoakim and Jarisch and, in any event, other embodiments of Yoakim do not require the type of flared capsule identified by Patent Owner. Ex. 1004, Fig. 63. Furthermore, we credit the testimony of Mr. Jobin that one of ordinary skill in the art would have understood how to design the chamber of Yoakim to allow reading of a barcode on the underside of the flange. Ex. 1003 ¶¶ 187–195. With respect to the argument that the use of Jarisch’s design would not allow a snug fit, we are directed to no persuasive evidence that Jarisch’s lack of contact between the capsule side wall and the holder would render the device inoperable or less effective. Resp. 39–40; see Reply 22 (citing Ex. 2019, 36:18–37:6). Indeed, as Petitioner points out, Jarisch indicates that its device, including its capsule holding means, allows the capsule to be successfully driven in rotation. Reply 22 (citing Ex. 1005 ¶ 23).” slip op. at 49

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “That argument is not persuasive. A reference need not identify or discuss another prior art patent or application in order for that reference to be deemed relevant or analogous art. Nor do we endeavor to determine why, or why not, a particular reference is discussed in a prior art reference. The analogous art inquiry focuses on reasonable pertinence and involves assessing the similarities between the claimed invention and the prior art, including the problems addressed and the closeness of the subject matter, as viewed by an ordinarily skilled artisan. Donner Tech., LLC v. Pro Stage Gear, LLC, 979 F.3d 1353, 1360 (Fed. Cir. 2020); see Airbus S.A.S. v. Firepass Corp., 941 F.3d 1374, 1380-81 (Fed. Cir. 2019) (relevant analysis focuses on comparing the disclosed embodiments, function, and structure of the claimed invention to the disclosures of the prior art). Against that backdrop, we reject Patent Owner’s suggestion that the inquiry involves whether the inventors of Jarisch saw a need to discuss Yoakim’s disclosure in Jarisch’s priority document.” slip op. at 45

  Patent outcomesUS 10,994,923 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,994,923

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.