• Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision

  Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12

  • BurdenNot shown unpatentable

    “referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22

  Patent outcomesUS 10,092,918 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 10,092,918
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

  Patent outcomesUS 11,844,921 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,921
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13

  • Expert testimonyPatent owner expert discountedMixed

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32

  Patent outcomesUS 10,583,449 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 10,583,449
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 7–9 and 11 are unpatentable as obvious over Goubet; proposed substitute claim 21 is denied as indefinite.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 5. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “The record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration, as asserted in Petitioner’s overall argument. See Pet. Reply 1–2. Contrary to Petitioner’s argument, in the cited general discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 2 (arguing that “Dr. Micklow’s declaration is premised on understandings of claim scope that are inconsistent with the constructions advanced by both of the parties” (emphasis added)). Instead, we read the cited portions of Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also Pet. Reply 1 (citing Ex. 1046, 112:4–12, 113:13–20, 115:15–18). Next, we turn to each of the four specific claim terms that Petitioner highlights in its further arguments.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 10–11; PO Resp. 5. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Florida Litigation a Joint Claim Construction statement that included stipulated claim constructions and disputed claim constructions for terms in the challenged patent as well as the ’449 patent and the ’918 patent. See Ex. 1018, Exhibit A (Stipulated Claim Constructions), Exhibit B (Disputed Claim Constructions). The parties stipulated to the construction of the terms “fluid dispersion” and “baffle” as recited in the challenged claim. See id., Exhibit A.10 10 When staying the Florida Litigation, the District Court cancelled the scheduled claim construction hearing. See ECF No. 67 (April 8, 2025) (granting joint motion to stay); ECF No. 68 (April 8, 2025) (cancelling the The stipulated construction of “fluid dispersion” merely restates the express definition of “fluid dispersion” from the challenged patent (although the definition is not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 3:8–20. Similarly, the stipulated construction of “baffle” essentially parrots one sentence in the challenged patent (again, not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 7:57–59. To the extent necessary, we determine that the complete record supports the parties’ stipulated constructions of “fluid dispersion” and “baffle,” and we apply those constructions below.” slip op. at 10

  Patent outcomesUS 9,527,094 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 9,527,094
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–5, 7, and 9 are unpatentable under §103 over Moskowitz and Steffee; the Board did not reach the Moskowitz-only ground and rejected the Hess ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical or metals and materials engineering), and at least five years of experience consisting of (a) designing, developing, evaluating and/or using spine devices, (b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and (c) biomechanical and functional loading of orthopedic implants. Pet. 17 (citing Ex. 1002 ¶ 49). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 49). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 9. Based on the full record, we determine that Petitioner’s undisputed proposed level of skill is reasonable and consistent with the ’385 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1. “channel” Throughout the challenged claims, “channel” appears together with “curved” in the term “curved channel.” For example, claim 1 recites “the fusion member comprising a first curved channel and a second curved channel,” “a first anchoring member configured to insert through the first curved channel,” and “second anchoring member configured to insert through the second curved channel.” Ex. 1001, 26:58–59, 26:60–61, 26:65– 66. Prior to institution, Petitioner asserted that one of ordinary skill in the art would “understand the claim term ‘channel’ to refer to a passage through which something moves or is conveyed.” Pet. 18 (citing Ex. 1002 ¶ 54). And, for purposes of our Decision on Institution, we adopted Petitioner’s proposed construction as being “consistent with the intrinsic record.” Institution Dec. 10. the ’385 [p]atent is readily understood by a POSA in context without needing explicit construction” and the plain and ordinary meaning should apply. PO Resp. 9–10. According to Patent Owner, the ’385 patent “consistently uses ‘channel’ to refer to a pathway within the fusion member through which an anchoring member traverses” and “explicitly states that channels may have different shapes and sizes and need not have a constant diameter, indicating the patentee did not intend to narrow the term beyond its common understanding.” Id. Petitioner replies noting that Patent Owner’s understanding “is substantively identical to Petitioner’s construction (‘a passage through which something moves or is conveyed’), specifically applied to an anchoring member.” Pet. Reply 6 (Pet. 18; PO Resp. 9–10). Thus, Petitioner concludes that “[t]he parties thus agree with the Board’s construction.” Id. Based on the full record, we agree with Petitioner that the parties’ positions on the meaning of the term “channel” are “substantively identical.” Because we see no difference between the parties’ position on the meaning of “channel,” we continue to adopt Petitioner’s proposed construction as it is consistent with the plain language of the claims and Specification. See Pet. 18 (citing Ex. 1001, 9:42–44, 9:53–55, 10:63–66, 11:47–63, 14:25–31, 14:65–67, 16:32–35, 22:51–57, 24:55–67) (The Specification uniformly refers to a “channel” as “a passage through which something (e.g., an anchoring member) traverses.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “between the spinous processes in order to decompress the spinal canal, and thus, “relieve pressure on the spinal cord and nerves by increasing the area of the spinal canal.” Ex. 1006, 1:32–34, 1:50–52, 2:1–6. In contrast, the ’385 patent identifies that “the goal is to achieve solid bony fusion between the involved endplates and eliminate the symptoms caused by motion and associated degenerative and other reactive changes between these unstable vertebral segments.” Ex. 1001, 1:53–57. Thus, Hess’s disclosed implant is designed to distract and stabilize the spinous processes, not to promote solid bony fusion between adjacent vertebral bodies. Consequently, we agree with Patent Owner that “converting Hess for intervertebral fusion would require eliminating its core dynamic stabilization functionality—directly contradicting Hess’s stated design objectives.” PO Resp. 42 (citing Ex. 1006, 2:5–26, 7:43–45). We also are not persuaded that Petitioner adequately explains why a person of ordinary skill would have modified Hess’s implant in the manner proposed. Petitioner contends that only “minimal modifications” to Hess’s shell dimension and shape would be required for intervertebral use. Pet. 61–67; Ex. 1002 ¶¶ 122–128. However, simply modifying the shape and size of Hess’s shell does not, without more, support a motivation to redesign Hess’s device from a posterior interspinous implant engaging spinous processes to an interbody implant positioned between vertebral bodies and anchored into vertebral bodies. Here, Hess discloses that modifying its dimensions serves to “preserv[e] mobility and alignment.” Ex. 1006, 7:5–7. Conversely, the ’385 patent’s fusion implant serves to limit mobility between vertebrae by achieving “solid bony fusion between the fusion member and the adjacent vertebral bodies.” Ex. 1001, 24:67–25:3. spinal fusion procedures” (id. at 6:49–52), we do not find that statement, without more, to disclose or suggest reconfiguring Hess’s interspinous implant as an “a fusion member configured to position between first and second vertebral bodies,” as required by limitation [1.1]. At most, Hess’s “adjunct to” statement suggests that the interspinous implant may be used in connection with, or in support of, a fusion procedure. It does not explain how or why Hess’s implant would be redesigned for placement between two adjacent vertebral bodies, nor does it teach that Hess’s locking wings would be reoriented or adapted to anchor into vertebral bodies rather than spinous processes. On this point, Mr. Culbert states that “[t]he only changes required to modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success.” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success. Hess’s disclosure that its shell may have shape variations to match adjacent bone (Ex. 1006, 7:7–13) also does not adequately explain why a person of ordinary skill would have had a reason to redesign Hess’s device for a different intervertebral environment, or why such a redesign would and “anchoring members,” i.e., locking wings. And, to the extent Hess discloses matching the shell to “the profile of the adjacent bone when deployed” (Ex. 1006, 7:11–13), Hess never suggests adapting the shell for placement between two adjacent vertebral bodies or for use as a fusion cage, it discloses that the “shell 12 is dimensioned and configured for placement between the spinous processes of symptomatic disc levels” (id. at 7:2–4). Thus, we agree with Patent Owner that the proposed modification “minimizes the structural differences and conflicting functional objectives inherent in modifying a device intended for the posterior elements of the spine for use in the anterior load-bearing column” (emphasis omitted). PO Resp. 41. For the reasons discussed above, we determine that Petitioner’s reliance on Mr. Culbert’s testimony amounts to more than just providing a motivation to modify Hess. Here, it amounts to relying on expert testimony to supply a missing limitation. As such, Petitioner’s arguments are not persuasive to demonstrate that the prior art teaches the limitations of the claim by a preponderance of the evidence. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 16 (PTAB Aug. 24, 2022) (precedential) (explaining that relying on expert testimony “is particularly problematic in cases where, like here, expert testimony is offered not simply to provide a motivation to combine prior-art teachings, but rather to supply a limitation missing from the prior art.”).” slip op. at 18

  Patent outcomesUS 8,460,385 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,460,385
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00225 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–6, 11, 12, and 15–17 are unpatentable: claims 1–4, 6, 11, 12, 15, and 17 over Blain; claims 5 and 16 over Blain, Bray, and Steffee.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical engineering, metals and materials engineering), and at least five years of experience with a) designing, developing, evaluating and/or using spine devices, b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and c) biomechanical and functional loading of orthopedic implants. Pet. 18–19 (citing Ex. 1002 ¶¶ 77–78). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 78). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 10. proposed level of skill is reasonable and consistent with the ’805 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner

    “Based on the full record, we determine that “housing,” as it appears in the context of the term “delivery housing” is a component that is a part of the delivery mechanism (see Ex. 1001, 11:27–31) and that simply contains and guides another component during delivery. See Ex. 1001, 13:25–27, 21:30–50. Thus, we apply the ordinary meaning of “housing,” as it appears in the context of the term “delivery housing,” and address in the context of “delivery housing,” as recited by claims 2 and 4.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “understanding of plain and ordinary meaning as set forth in the litigation.” Pet. Reply 13 (citing Ex. 1022, 2 (“channel . . . [that] has a curved path”)). Thus, Petitioner concludes that the parties agree on construction of “curved channel.” Id. at 13–14.10 9 Although the parties refer to “curved” alone or to a “curved channel,” we understand the parties to be referring to a “channel of the fusion member [that] is curved,” as recited in claims 5 and 16. 10 At oral argument, the parties confirmed that there was no dispute as to the meaning of “curved channel.” See Tr. 15:12–14 (Petitioner stating that “the term “curved channel” appears consistent with the plain language of the claims and Specification. Thus, we adopt the parties’ agreed-upon construction and construe a channel that is “curved” to mean a channel following a curved trajectory.” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We have considered Petitioner’s arguments and evidence, and Patent Owner’s counterarguments and find, on the complete trial record, that Petitioner demonstrates, by a preponderance of the evidence, that Blain discloses “a fusion member for positioning between two vertebral bodies, the fusion member having a first plurality of channels, each channel of the first plurality of channels having an opening on a same side of the fusion member,” as recited by limitation 1.1. At the outset, we find Patent Owner fails to establish that any of the alleged differences between Blain’s “apertures and the ’805 [p]atent’s internal channel geometry” relate to any particular recitation in argued limitation 1.1. Although we acknowledge that claims 5 and 16 each requires curved trajectories (see, e.g., claim 5 reciting “each channel of the fusion member is curved”), limitation 1.1 does not recite such a feature. As Petitioner correctly notes, “[n]othing in the claim requires a special ‘internal channel geometry,’ ‘shaped block,[’] ‘curved tubular channels,’ non ‘straight-through’ apertures, or ‘flexible’ anchors.” Pet. Reply 14 (footnote omitted). See In re Self, 671 F.2d 1344, 1348 (CCPA 1982) (rejecting arguments “not based on limitations appearing in the claims”). Therefore, after reviewing the arguments and evidence, we determine that Petitioner has shown by a preponderance of the evidence that Blain discloses the subject matter of limitation 1.1.” slip op. at 19

  Patent outcomesUS 9,730,805 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,730,805
• Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00169 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 50–54 are unpatentable as obvious over KR996 and JP705; claims 55–63, 68, 69, and 80–85 were not shown unpatentable over KR996, JP705, Bares, and Beltrami.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “(“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”).” slip op. at 35

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 57

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “e) Conclusion as to the Independent Claim 50 For the reasons discussed above, the evidence presented by Petitioner” slip op. at 67

  • ExcludeMotion to exclude, grantedGranted in part

    “For these reasons, we are persuaded by Petitioner to exclude, as” slip op. at 19

  Patent outcomesUS 9,321,386 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,321,386
• Kubota North America Corporation v. Vermeer Manufacturing CompanyAll claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00168 · APJ Meredith C Petravick · IPR · Final written decision

  The Board held claims 31–49, 70–79, 86, and 87 unpatentable under §103 over KR996 and JP705, with Bares added for claims 70–79.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “Pet. Init. CC Br. 3 (stating that “by including the term ‘generally’ in a statement, the feature (i.e., single weldment) is expressly identified as merely included in some, but not all embodiments”); PO Init. CC Br. 3 (“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”). Turning to the prosecution history, neither Petitioner nor Patent Owner has highlighted any specific statements that impact the scope of the term “mainframe.” And from our independent review, we do not discern any such statements. For these reasons, the intrinsic evidence as a whole supports construing “mainframe” as a primary supporting structure.” slip op. at 33

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art The level of ordinary skill in the art is “a prism or lens” through which” slip op. at 20

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 55

  Patent outcomesUS 9,321,386 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,321,386
• Kubota North America Corporation v. Vermeer Manufacturing CompanySome claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00167 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 1–13, 21, 22, 64, and 65 are unpatentable over the asserted grounds; claims 15, 17, 19, 20, 23–30, 66, and 67 were not shown unpatentable over KR996, JP705, and Beltrami.

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “B. Analysis “The moving party has the burden of proof to establish that it is” slip op. at 9

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art We review the grounds of unpatentability in view of the” slip op. at 21

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownPrior construction adoptedDecided for petitioner

    “lexicographical, we agree with the parties that “mainframe” is not limited to a single weldment. Pet. Init. CC Br. 1; PO Init. CC Br. 1–2. Instead, a single-weldment “mainframe” is merely one disclosed embodiment. See Pet. Init. CC Br. 3 (stating that “by including the term ‘generally’ in a statement, the feature (i.e., single weldment) is expressly identified as merely included in some, but not all embodiments”); PO Init. CC Br. 3 (“This language is merely exemplary, using reference numerals to refer to the embodiment’s features and qualifying ‘single weldment’ as referring ‘generally’ to specific embodiments.”). The Iowa District Court reached the same conclusion. See Ex. 1020 at 4 (holding that “‘mainframe’ will be given its plain and ordinary meaning and does not require a single weldment” (emphasis added)), cited at Pet. Init. CC Br. 2; see also 37 C.F.R. § 42.100(b) (“Any prior claim construction determination concerning a term of the claim in a civil action, or a proceeding before the International Trade Commission, that is timely made of record in the inter partes review proceeding will be considered.”).” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 55

  Patent outcomesUS 9,321,386 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,321,386
• Kubota North America Corporation v. Vermeer Manufacturing CompanyAll claims unpatentable
  PTAB · Jun 30, 2026 · PGR2025-00016 · APJ Eric C Jeschke · PGR · Final written decision

  Claims 4–14 are unpatentable: claims 4 and 7–12 as anticipated by KR996, claims 5–6 as obvious over KR996 and JP705, and claims 13–14 as obvious over KR996 and Bares.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “2. The Reasons to Combine KR996 and JP705 Petitioner provides reasons to combine KR996 with JP705. See” slip op. at 73

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia no nexusObjective indicia outweighedDecided for petitioner

    “probative and cogent evidence in the record” and “may often establish that an invention appearing to have been obvious in light of the prior art was not.” Transocean Offshore Deepwater Drilling, Inc. v. Maersk Drilling USA, Inc., 699 F.3d 1340, 1349 (Fed. Cir. 2012). Thus, notwithstanding what the teachings of the prior art would have suggested to one skilled in the art, secondary considerations (objective evidence of non-obviousness) may lead to a conclusion that the challenged claims would not have been obvious. In re Piasecki, 745 F.2d 1468, 1471–72 (Fed. Cir. 1984). Our obviousness analysis includes consideration and weighing of Patent Owner’s objective indicia of non-obviousness.” slip op. at 53

  • ExcludeMotion to exclude, grantedGranted in part

    “For these reasons, we are persuaded by Petitioner to exclude, as” slip op. at 27

  Patent outcomesUS 12,098,063 unpatentable
  § 103 obviousnesscites Phillips
  Patents in suitUS 12,098,063

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.