• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Oct 7, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Rehearing

  The Board denied Solus’s rehearing request, leaving institution denied for claims 1–8 because the petition did not adequately show motivation to combine Hanafusa and Dobashi.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve Dobashi’s RSm values. Dobashi teaches that because RSm “can be adopted as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66–3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66– 3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 4

  § 103 obviousness
  Patents in suitUS 11,346,014
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Oct 7, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Rehearing

  The Board denied rehearing and left in place its denial of institution because Petitioner did not show that claims 1–10 were likely obvious over the asserted combinations.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “II. STANDARD OF REVIEW When rehearing a decision on institution, we do not review the merits of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors.” Arnold Partnership v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004) (citing In re 1 US 2013/0108922 A1, published May 2, 2013 (Ex. 1004, “Shinozaki”). 2 G. Khatibi, Temperature Dependent Elastic and Thermal Properties of Thin Copper Foils, Copper; Proceedings of the International Conference Copper ’06 (2006) (Ex. 1006, “Khatibi”). 3 Korean Patent Pub. No. 10-2012-0003485, published Jan. 10, 2012 (Ex. 1013; Ex. 1014 (English translation), “Toshio”). 4 US 2013/0108887 A1, published May 2, 2013 (Ex. 1012, “Kim”). 5 Griesi, M.B., Characterization of Electrodeposited Copper Foil Surface Roughness for Accurate Conductor Power Loss Modeling (2014) (Master’s Thesis, University of South Carolina) (Ex. 1015, “Griesi”). rehearing has the burden to show that the decision should be modified. 37 C.F.R. § 42.71(d). Additionally, the request for rehearing “must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply.” Id.” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Not shown unpatentable

    “For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE[6] value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added).” slip op. at 4

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Petitioner, however, does not adequately explain why a POSITA would have been motivated to modify Kim’s copper foil surface to have a Pc value of 19.2 as reported in Griesi. In particular, neither Petitioner nor Dr. Randall points us to, nor do we discern, any teaching in Griesi that a peak count of 19.2 provides any particular benefits or properties that would have lead a POSITA to modify Kim’s copper foil surface as Petitioner proposes. Instead, Petitioner’s arguments that a POSITA would have been motivated to modify Kim’s copper foil surface with Griesi’s peak count patent itself. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 421 (2007) (stating that the fact finder must be aware “of the distortion caused by hindsight bias and must be cautious of arguments reliant upon ex post reasoning”). It was Petitioner’s burden to establish that the combined teachings Kim and Griesi disclose limitation [1g] as proposed. We are not persuaded that we misapprehended Petitioner’s argument when we determined that Petitioner did not meet that burden.” slip op. at 8

  • BurdenDecided for patent owner

    “It was Petitioner’s burden to establish the Khatibi, alone or in combination with Shinozaki, Toshio, and Kim, discloses limitation [1d]. We concluded that Petitioner failed to meet that burden for the reasons explained in our Decision. We are not persuaded that we overlooked or misapprehended Khatibi’s disclosures, or Petitioner’s evidence and explanation thereof, in doing so.7” slip op. at 5

  § 103 obviousnesscites KSR
  Patents in suitUS 10,811,689
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14

  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 11,346,014
• Arthrex, Inc. v. Medshape, Inc.Institution denied
  PTAB · Apr 25, 2025 · IPR2025-00053 · APJ James A Tartal · IPR · Institution

  The Board denied institution of IPR challenging claims 1–10, exercising § 314(a) discretion because the Fintiv factors, considered holistically, favored denial.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied discretionary otherInstitution denied

    “review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2023). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). However, institution of inter partes review is discretionary. Upon consideration of the Petition, the Preliminary Response, the Preliminary Reply, the Preliminary Sur-reply, and the evidence of record, we exercise our discretion to deny institution of inter partes review under 35 U.S.C. § 314(a) in view of the co-pending district court litigation.” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Denied

    “7. Balancing the Fintiv Factors As discussed above, factors 1 and 3–5 each favor denial. Factor 2 is the only factor that favors institution because there is no trial date in the Parallel Proceeding and the evidence presented of a median time-to-trial for civil trials in that district suggests a potential trial date after the statutory deadline for a final written decision in this proceeding. However, Patent Owner also shows that discovery and any dispositive motions will be completed in the Parallel Proceeding well before the statutory deadline for a final written decision in this proceeding, which presents a risk of duplicated efforts given the unmitigated overlap in issues between proceedings. On balance, considerations concerning an uncertain trial date in the Parallel Proceeding under Factor 2 do not outweigh the more substantial reasons identified under the other Fintiv Factors. Thus, considering all of the factors holistically, we find on balance that the factors on this unique record weigh in favor of discretionary denial of the Petition. Accordingly, we exercise discretion to deny institution under 35 U.S.C. § 314(a).” slip op. at 15

  Discretionary denial
  Patents in suitUS 7,985,222
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 23, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were unpatentable over either asserted § 103 ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had at least an undergraduate degree in materials science, chemical engineering, electrical engineering, or related field, or equivalent knowledge, training, or experience, with at least two years of experience working on the development of materials or components for electronic devices such as batteries.” Pet. 4. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less 7 We refer to the page numbers added by Petitioner to the bottom-center of the page. formal education.” Id. (citing Ex. 1003 ¶ 10). Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’689 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))).” slip op. at 10

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “We are not persuaded, on this record, that Petitioner adequately establishes that Khatibi discloses a CTE in the claimed range of 16 to 22 µm/(m·°C.). Petitioner’s argument that Khatibi’s reported values meet this claim limitation are based solely on Dr. Randall’s testimony that Khatibi’s measurement method would produce results that would not significantly differ from results determined using the claimed method. See Pet. 16–18 (citing Ex. 1003 ¶¶ 56–60). Dr. Randall’s testimony, however, is largely conclusory and unsupported by adequate explanation and/or objective evidence. For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added). to little weight. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 12 at 5 (PTAB Feb. 10, 2023) (finding that “the Board was correct in giving little weight to Petitioner’s expert because the expert declaration merely offered conclusory assertions without underlying factual support”); Upjohn Co. v. Mova Pharm. Corp., 225 F.3d 1306, 1311 (Fed. Cir. 2000) (“Lack of factual support for expert opinion to factual determinations, however, may render the testimony of little probative value in a validity determination.” (quoting Ashland Oil, Inc. v. Delta Resins and Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985))); see also In re Ethicon, Inc., 844 F.3d 1344, 1348, 1352 (Fed. Cir. 2017) (concluding that the Board properly gave “little weight” to conclusory expert testimony of objective indicia). Because Petitioner offers Dr. Randall’s testimony to supply a limitation missing from the prior art, namely, the CTE measurement method, and we give Dr. Randall’s unsupported and conclusory testimony little weight, we are not persuaded that Petitioner establishes a reasonable likelihood of showing that Khatibi discloses limitation [1d].” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “second surfaces of the electrolytic copper foil ranges from 3 to 92.” Ex. 1001, 13:62–63. Petitioner contends that “Kim teaches that the electrolytic copper foil (e.g., untreated or treated copper foil) having Rz less than 2 µm is advantageous toward battery efficiency and performance,” and, similarly, Griesi describes the use of untreated electrolytic copper foil with an Rz value less than 2 µm in printed circuit boards that are compatible with secondary batteries. Pet. 58–59 (citing Ex. 1012, claim 2, ¶¶ 13, 25, 27; Ex. 1003 ¶ 157). In particular, Petitioner notes that Griesi’s Figure 3.16 describes an “Rz value of 1.2 µm.” Id. at 59 (citing Ex. 1015, 53–54; Ex. 1003 ¶ 158). Petitioner asserts that “Dr. Randall explains that a POSITA would have also recognized another surface roughness-related parameter, Rpc, in Griesi as a potentially useful parameter that can be optimized to further enhance uniformity or generally improve Kim’s copper foil surface, for example, to prevent wrinkles or achieve other advantageous effects.” Id. (citing Ex. 1003 ¶ 159). Although Dr. Randall demonstrates that Griesi’s Pc (or Rpc) value is 19.2 over a 4 mm sampling length (Ex. 1003 ¶ 155), Petitioner does not contend that Griesi addresses this value, or indicates any benefit that might be derived from its use. Instead, Griesi’s Pc value appears to be an incidental finding, which is not discussed or analyzed in the reference. See incidental, unexamined finding would lead a POSITA to import Griesi’s Pc value into Kim’s copper foil, absent a hindsight desire to reconstruct the claimed invention. As such, Petitioner’s arguments with respect to Kim and Griesi are not persuasive. See Cheese Sys. Inc. v. Tetra Pak Cheese and Powder Sys., Inc., 725 F.3d 1341, 1352 (Fed. Cir. 2013) (“Obviousness cannot be based on the hindsight combination of components selectively culled from the prior art to fit the parameters of the patented invention.” (internal quotations marks omitted)). Thus, we are not persuaded, on this record, that the combined disclosures of Kim and Griesi teach all of the elements of limitation [1g].” slip op. at 23

  § 103 obviousnesscites Phillips
  Patents in suitUS 10,811,689
• Solus Advanced Materials Co, Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution

  The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied

    “whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

    “Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached

    “Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9

  § 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 10,480,090
• Deere & Company v. David’S Dozer V-Loc System, Inc.Institution denied
  PTAB · Mar 18, 2025 · IPR2024-01442 · APJ Robert J Silverman · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–4 unpatentable under any asserted obviousness ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the Petition and the Preliminary Response (including any other authorized submissions) “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.”” slip op. at 8

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner’s proposal for the level of ordinary skill in the art differs from that of Petitioner, primarily because Patent Owner contends that such a person of ordinary skill would have a certain degree of experience relating specifically to skid steers, or similar machinery, and their hydraulic systems. See Prelim. Resp. 8–10 (citing Ex. 2001 ¶ 31). Insofar as we understand the significance of Patent Owner’s concerns about the differences between the parties’ proposals, these differences do not bear upon the issues addressed herein. Accordingly, for the purposes of the present Decision, we adopt Petitioner’s proposed definition of the relevant level of ordinary skill in the art. Further, with regard to the issues addressed in this Decision, Petitioner’s proposed description of the level of ordinary skill in the art appears to be consistent with the level of skill indicated by the ’300 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We agree with Patent Owner. Petitioner argues that “Patent Owner made the deliberate choice to claim broadly,” eschewing “structural limitations that would have expressly or implicitly required the hydraulic of Element [1.4] to differ from the hydraulic of Element [1.5].” Reply 7. Further, Petitioner argues that “Patent Owner chose to generically recite ‘a hydraulic’ in each of Elements [1.4] and [1.5] without distinguishing labels, identifiers, or qualifiers.” Id. To the contrary, the two recited “hydraulic[s]” are distinguished by the language surrounding and modifying each instance in the method of claim 1. Indeed, the recitations of distinct operations performed by each “hydraulic,” in the claimed method, further support the understanding these are distinct and different structures. Additionally, as Patent Owner contends (see Prelim. Resp. 16), each instance of “hydraulic” is introduced with the indefinite article “a” — a signal that the two instances of “a hydraulic” do not refer to the same structure. See Becton, Dickinson and Co. v. Tyco Healthcare Group, LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (“Where a claim lists elements separately, ‘the clear implication of the claim language’ is that those elements are ‘distinct components’ of the patented invention.”) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004)); see also CAE Screenplates, Inc. v. Heinrich Fiedler GmbH & Co., 224 F.3d 1308, 1317 (Fed. Cir. 2000) (“In the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings.”); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996) (concluding that where a claim provides for two separate elements, a “second portion” and a “return portion,” these two elements “logically cannot be one and the same”).” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundNot shown unpatentableNot shown unpatentable

    “As Patent Owner argues, Petitioner’s proposed combination of Funk and Lewis “would interfere with the intended operation of the Funk control system to move the lift arms up and down in response to inter alia changes in the height signal.” Prelim. Resp. 20. This scenario is similar to that in Tec Air, 192 F.3d at 1356, which involved a claimed injection-molding technique that used screw-threaded adjustable plugs accessed from the inner, cavity-facing, side of the mold. The proposed combination included a prior art reference disclosing adjustment members accessed from the opposite, outer, side of the mold, and having a non-threaded smooth tip that extended through the mold and into the cavity. Id. at 1360. The Federal Circuit held that the prior art reference was properly determined to teach away from the claimed invention, because “no screw driver would be able to turn the smooth-headed screws from the cavity-side of the mold,” hence the proposed “combination would be inoperable for its intended purpose.” Id. Likewise, the proposed combination in the present matter teaches away from the subject matter of claim 1, because it would “immobilize [Funk’s] main arm,” and its associated hydraulic cylinder 18, “leaving just ‘one’ of Funk’s two adjustment mechanisms — blade tilt — available for grade control” (Pet. 10), thereby decreasing the system’s accuracy (see Ex. 2001 ¶¶ 113– 14) and negating the very technique that Funk relies upon to achieve its stated goal. See Ex. 1004 ¶ 7 (“[O]ne object of the present invention is to provide an automatic leveling control system that is sufficiently accurate for preparing the ground prior to the construction of concrete floors and foundations.”)” slip op. at 28

  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · Markman · KSR · Graham
  Patents in suitUS 10,533,300
• Head Sport GmbH v. Vermont Safety Developments LLCInstitution denied
  PTAB · Jan 15, 2025 · IPR2024-01099 · APJ Barry L Grossman · IPR · Institution

  The Board denied institution on all challenged claims because Petitioner did not show that the prior art met the claims under the Board’s construction of “release logic.”

  RulingsInstitution decision

  • Other 314aNot reached

    “Thus, based in part on the “relatively minimal proceedings” in the District Court, and the “[t]he possibility of significant simplification” for the District Court from our claim construction of the term “release logic,” we decline Patent Owner’s invitation to discretionarily deny the petition. Moreover, we need not address Patent Owner’s contentions concerning discretionary denial because, as discussed below, Petitioner has not established a reasonable likelihood of prevailing on the merits in demonstrating unpatentability of any challenged claim of the ’953 patent. See MillerKnoll, Inc. v. Aaron DeJule, IPR2023-01428, Paper 8, 10 (PTAB March 22, 2024).” slip op. at 20

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “We now turn to the merits of Petitioner’s asserted Grounds of unpatentability. Analysis of Claims We focus our analysis on the term “release logic,” which appears in all the challenged claims. As we explained above, we determined that the term “release logic” along with its recited functions should be construed under Section 112 ¶ 6 to cover “corresponding structure, material, or acts described in the specification and equivalents thereof,” that perform the recited functions. Petitioner did not identify how the asserted prior art described those structures or their equivalents. Instead, as discussed above, Petitioner relied on Patent Owner’s preliminary construction in the District Court, which Patent Owner identified in wholly functional terms as a “specific sequence of actions.” Pet. 6 (citing Ex. 1010; Ex. 1002 ¶¶ 52–53); Prelim. CC Reply 1 (citing Ex. 1010, 5). Thus, Petitioner’s analysis fails to address how the prior art meets the limitations set forth in the claims as we have interpreted those claims. Accordingly, we find that Petitioner has failed to meet its burden to establish a reasonable likelihood that it would prevail with respect to at least one of the claims challenged in the petition. Thus we deny institution of an inter partes review. See Samsung Elecs. Am., Inc. v. Cobblestone Wireless, LLC, IPR2024-00319, Paper 16, slip op. 16–23 (PTAB Jun. 24, 2024) (holding that because Petitioner’s obviousness showing was based on an incorrect claim construction, Petitioner did not demonstrate a reasonable likelihood that a claim limitation was disclosed by, or would have been obvious over, the cited reference).” slip op. at 49

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner

    “be persuasive, we conclude that an ordinarily skilled artisan would not have understood “release logic” to refer to, or to have a definite meaning as the name for structure. Accordingly, we find that any presumption that the claims at issue do not invoke § 112, ¶ 6 is overcome, and we conclude that “release logic” introduces claim language that is properly interpreted under § 112, ¶ 6. Dr. Hull’s testimony in the District Court appears to address only the embodiment disclosed in Figures 9–11 of the ’953 patent. He did not opine on the other embodiments disclosed in the patent, such as the embodiment in Figures 22–24 disclosing electronic third-quadrant release-logic binding system 2204. However, his testimony that the words of the claim would not be understood by an ordinarily skilled artisan to have definite meaning as the name for structure remains persuasive.” slip op. at 48

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “sophistication of the technology; and (5) educational level of active workers in the field.” Id. ¶ 30. Dr. Hull fails to state whether these factors were relied upon in forming his opinion, and if so, he also fails to state the underlying facts or data relating to these factors on which the opinion is based. There is no evidence to support why an “advanced degree” in mechanical engineering and five years of relevant experience is required. His opinion is supported only by his statement that he is “familiar with the technology at issue here and the state of the art at the time the application leading to the ’953 patent was filed.” Ex. 1002 ¶ 31. Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight. 37 C.F.R. § 42.65(a). Here, based on Dr. Hull’s extensive experience, we give his testimony some, but little, weight. Patent Owner states that “for purposes of this Preliminary Response only, VSD does not now dispute the definition of the POSITA as set forth by Dr. Hull.” Prelim. Resp. 7. We note that Patent Owner’s position is based on Dr. Hull’s full testimony, not the excerpt asserted by Petitioner. Accordingly, for purposes of this Decision, and based on the limited record before us, we determine, based on Dr. Hull’s testimony, the cited prior art, and Patent Owner’s qualified agreement with Dr. Hull’s testimony, that a person of ordinary skill in the relevant technology would have had an advanced degree in mechanical engineering or a related discipline and five years of experience in either ski binding design, manufacture, or testing; research concerning ski bindings and related equipment; or the development of standards concerning ski bindings or related equipment. This level of skill is approximate, and more experience would compensate for less formal education, and vice versa.” slip op. at 25

  Claim constructionDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 7,523,953
• Dyson Technology Ltd. / Dyson, Inc. v. Omachron Intellectual Property Inc.Institution denied
  PTAB · Oct 15, 2024 · IPR2024-00766 · APJ Brent M Dougal · IPR · Institution

  The Board denied institution because the Petition did not show a reasonable likelihood of proving any challenged claim obvious over the asserted prior-art grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Petitioner bears the burden to demonstrate unpatentability. Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). At this preliminary stage, we determine whether the information presented in the Petition shows a reasonable likelihood that Petitioner would prevail in establishing that at least one challenged claim would have been obvious over the prior art. See 35 U.S.C. § 314(a).” slip op. at 5

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentable

    “However, each of these asserted modifications is based on a teaching that is not present in Brown. Brown does not teach “a projection that provides resistance against ‘handle’ movement” or that “opening Brown’s ‘cover’ requires bending Brown’s ‘port,’” as asserted by Petitioner. See PO Resp. 22. As repeatedly noted, the identified “projection” appears to be nothing more than a portion of cover 14 the accessory/hose port. Petitioner’s arguments regarding a projection that provides resistance and a bendable port in Brown, appear to be nothing more than an effort to create the limitations of the claims in the prior art based on improper hindsight. For at least the above reasons, the Petition does not show how Brown teaches or suggests all of the limitations of the independent claims.” slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentable

    “Petitioner argues that when cleaning tool 10 (i.e. accessory) is in position on the vacuum, end wall 26 cannot open and, thus, that end wall is inhibited from opening. Pet. 45–46 (citing Ex. 1005, ¶ 37, Fig. 2; Ex. 1002 ¶¶ 143–145 (similar statements from Petitioner’s declarant)). Petitioner then asserts that the catch is therefore inhibited from moving to the disengaged position. Id. at 46. The combination of Dimbylow and Howes does not teach this limitation and Petitioner’s assertions are not persuasive. As can be seen from the above annotated Figure, nothing inhibits Dimbylow’s catch 42 from moving to a disengaged position. See also Prelim. Resp 11–14. Rather, any time Howe’s button is pressed, thereby moving the push-rod (to the right in the Figure), catch 42 would disengage, whether the door opened or not. Though cleaning tool 10 (i.e. accessory) inhibits end wall 26 from opening, it has no impact on movement of catch 42 (i.e. lock engaging member) from the engaged to disengaged position as required by the claim. Thus, the lock engaging member of Petitioner’s combination, i.e., the catch, is not inhibited from moving to a disengaged position when the accessory, i.e., the cleaning” slip op. at 17

  • Skill levelSkill level petitioner adoptedOther

    “understanding of a person of ordinary skill in the art at the time of the invention (“POSA”). Id. at 13, 17. Petitioner’s declarant asserts that a person of ordinary skill in the art would have had a bachelor’s degree in mechanical engineering or a similar field and 2-3 years of experience in machine design, such as vacuum cleaners. Additional education could offset less experience and vice versa, and a POSA could have also obtained similar knowledge and experience through other means. Ex. 1002 ¶ 42; see also Pet. 22 (making the same assertion without citation to declarant). Patent Owner does not contest the level of skill. Prelim. Resp. 2. We are persuaded, on the present record, that Petitioner’s (and its declarant’s) proposed definition of the ordinarily skilled artisan is consistent with the problems and solutions in the ’477 patent and prior art of record. We adopt the above definition of the level of skill for the purposes of this Decision.” slip op. at 5

  Claim construction§ 103 obviousness
  Patents in suitUS 10,568,477
• Honeywell International Inc. v. DSM IP Assets B.V.Institution denied
  PTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution

  The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23

  • Skill levelOther

    “PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner

    “a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner

    “Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,280,532

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.