- Dell Technologies Inc. / Dell Inc. et al. v. Litl LLCInstitution deniedPTAB · May 28, 2024 · IPR2024-00481 · APJ Brian D Range · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 12, 14, or 16–18 were unpatentable over the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition in view of the present record and for the reasons explained below, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to at least one of the challenged claims. Accordingly, we do not institute an inter partes review on the grounds set forth in the Petition. See 37 C.F.R. § 42.108(a).” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner asserts that a person of ordinary skill in the art (POSITA) would have had (i) a bachelor’s degree (or equivalent) in electrical engineering, computer engineering, computer science, or a comparable subject and two to three years of experience in the design and architecture of laptop computers and other portable electronic devices, or (ii) an advanced degree (or equivalent) in electrical engineering, computer engineering, computer science, or a comparable subject and one year of post-graduate research or work experience in the field. Ex. 1003, ¶102. A POSITA would have been familiar with the structural hardware aspects of laptop computers and other portable electronic devices as well as designs of user interfaces employed and displayed by computer operating systems and their organization of content and functionality. Id. Pet. 10–11. Patent Owner does not dispute the level of ordinary skill in the art. Prelim. Resp. 18. For this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the level of skill reflected in both the prior art and the ’229 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“For this decision, we do not discern a need to construe explicitly any claim language because doing so would have no effect on our analysis below and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“Lane’s orientation information would generate information indicative of a current mode of operation as claim 18 requires. Instead, we agree with Patent Owner that Petitioner has not carried its burden to establish a reasonable likelihood of prevailing in showing that a person of ordinary skill in the art would have, based on the teachings of Lane or other cited art, used an accelerometer that generates orientation information indicative of the current mode of operation. See Prelim. Resp. 35–42. Lane’s accelerometer provides information only on the “spatial orientation” of the first module (keyboard) or second module (screen). Ex. 1005, 5:23–6. “Spatial orientation,” as used in Lane, refers to the orientation of the first or second module relative to the earth’s gravity because Lane teaches that its accelerometer uses a “movable conductor” that “responds via gravitational forces” to reorientation. Id. Lane does not teach using the accelerometer to determine the orientation of the first and second modules relative to each other, and Petitioner does not suggest that Lane could be modified to determine the orientation of the first and second modules relative to each other. Rather, Petitioner argues that, for example, a determination that the keyboard is “facing upward but at a diagonal angle” (relative to the earth’s gravity) would be indicative of “easel mode.” Pet. 29.” slip op. at 20
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,563,229 - Dell Technologies Inc. / Dell Inc. et al. v. Litl LLCInstitution deniedPTAB · May 28, 2024 · IPR2024-00480 · APJ Brian D Range · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–11, 19–21, and 23–25 were obvious over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition in view of the present record and for the reasons explained below, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to at least one of the challenged claims. Accordingly, we do not institute an inter partes review on the grounds set forth in the Petition. See 37 C.F.R. § 42.108(a).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (POSITA) would have had (i) a bachelor’s degree (or equivalent) in electrical engineering, computer engineering, computer science, or a comparable subject and two to three years of experience in the design and architecture of laptop computers and other portable electronic devices, or (ii) an advanced degree (or equivalent) in electrical engineering, computer engineering, computer science, or a comparable subject and one year of post-graduate research or work experience in the field. Ex. 1003, ¶102. A POSITA would have been familiar with the structural hardware aspects of laptop computers and other portable electronic devices as well as designs of user interfaces employed and displayed by computer operating systems and their organization of content and functionality. Id. Pet. 9–10. Patent Owner does not dispute the level of ordinary skill in the art. Prelim. Resp. 17. For this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the level of skill reflected in both the prior art and the ’229 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“For this decision, we do not discern a need to construe explicitly any claim language because doing so would have no effect on our analysis below and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Lane’s accelerometer provides information only on the “spatial orientation” of the first module (keyboard) or second module (screen). Ex. 1005, 5:23–6:6. “Spatial orientation,” as used in Lane, refers to the orientation of the first or second module relative to the earth’s gravity because Lane teaches that its accelerometer uses a “movable conductor” that “responds via gravitational forces” to reorientation. Id. at 5:25–31. Lane does not teach using an accelerometer to determine the orientation of the first and second modules relative to each other, and Petitioner does not suggest that Lane could be modified to determine the orientation of the first and second modules relative to each other. Rather, Petitioner argues that, for example, a determination that the keyboard is “facing upward but at a diagonal angle” (relative to the earth’s gravity) would be indicative of “easel mode.” Pet. 30. The spatial orientation of Lane’s keyboard or screen relative to the earth’s gravity, however, does not reliably9 indicate the device’s current display mode because, at any given moment, the Lane device could be held at different angles such that orientation relative to gravity does not correlate with the display mode. For example, Lane Figure 13 teaches that its keyboard could be at an angle (relative to earth’s gravity) while in laptop mode. Ex. 1005, Fig. 5; Prelim. Resp. 41–42. We reproduce Lane Figure 13 as annotated by Patent Owner below.” slip op. at 18
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,563,229 - PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips - Asustek Computer Inc. / Asus Global Pte. Ltd. et al. v. Litl LLCInstitution deniedPTAB · May 23, 2024 · IPR2024-00532 · APJ David Cotta · IPR · Institution
The Board denied institution on claims 1–10 and 23 because Petitioner did not show a reasonable likelihood that a skilled artisan would replace Lane’s hinge with Misawa’s single-pivot hinge.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“defines a single longitudinal axis running along an interface between the display component and the base” where “the display component and the base are rotatable about the single longitudinal axis.” Ex. 1001, 17:15–21 (the “single axis limitation”). In each of its seven grounds, Petitioner asserts that this claim limitation would have been obvious because “a POSA would have been motivated and able to adapt the portable computer 10 of Lane to use a single-pivot hinge like the hinge 20 taught in Misawa.” Pet. 29; see also id. at 32 (“In the portable computer 10 of Lane modified to implement a singlepivot hinge like the hinge 20 of Misawa, the hinge would define a ‘single longitudinal axis.’”). Our decision turns on whether Petitioner has carried its burden to establish a reasonable likelihood of prevailing on its assertion that the POSA would have been motivated to use a single-pivot hinge, like that disclosed in Misawa, in Lane’s computer, as proposed in the Petition. For the reasons discussed below, we find that Petitioner has not carried its burden. slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Having determined that Petitioner’s proposed modification provides a modest benefit, we now consider whether such modification has any drawbacks. Henny Penny Corp. v. Frymaster LLC, 938 F.3d 1324, 1332 (Fed. Cir. 2019) (explaining that, in an obviousness inquiry, “[t]he benefits, both lost and gained, should be weighed against one another.”) (citing Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n. 8 (Fed. Cir. 2000)). Here, by Petitioner’s own admission, modifying Lane’s hinge in the manner Petitioner proposes comes at the expense of the hinge’s ability to rotate through a full 360°, which allows Lane’s computer to function as a tablet. Pet. 17 (explaining that Misawa’s single axis hinge “can open beyond the stated 300° (but less than 360°)”), 29 (explaining that a dual-pivot hinge is “unnecessary except to allow the display component to rotate far enough to fold flat against the bottom of the base to deploy the portable computer in tablet mode”); Ex. 1004 ¶¶ 110 (testimony of Dr. Wolfe echoing statement in the Petition that Misawa’s hinge cannot rotate through the full 360°), 114 (testimony of Dr. Wolf explaining that “the use of a dualpivot hinge would make it easier to design a portable computer having a display that can rotate far enough to fold flat against the bottom of the base to deploy the portable computer in a tablet mode”); Ex. 1017, 3:5–14 (Lane, teaching that allowing 360° of rotation allows a laptop computer to function as a “pen-based computing tablet”).” slip op. at 19
- Expert testimonyPetitioner expert creditedDecided for patent owner
“motivated to replace Lane’s hinge with a single axis hinge because a single axis hinge is less expensive and more reliable than Lane’s biaxial decouplable hinge. Pet 29; Ex. 1004 ¶¶ 113, 114, 131 (testimony of Dr. Wolfe to the same effect). Patent Owner argues this proffered motivation is supported only by the conclusory testimony of Dr. Wolfe. Prelim. Resp. 21. Patent Owner also argues that neither Petitioner nor Dr. Wolfe attempts to explain or quantify just how much of a benefit using a simpler hinge provides. Id. We agree that Dr. Wolfe’s testimony on this point is somewhat conclusory. See, e.g., Ex. 1004 ¶¶ 113, 114, 131 (citing only limited supporting evidence). Nonetheless, we give Dr. Wolfe’s testimony some weight because it is consistent with the notion that a simpler device with fewer moving parts is likely to be somewhat less expensive and more reliable than a more complicated device. See Ex. 1016 ¶ 9 (prior art reference cited by Dr. Wolfe (Misawa), teaching that the mechanism of a hinge having a biaxial structure is “likely to be biaxial decouplable hinge with Misawa’s single axial hinge would provide a modest benefit.” slip op. at 18
- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art at the time of the ’688 Patent (“POSA”) would have had a bachelor’s degree (or equivalent) in electrical engineering, computer engineering, computer science, or a comparable subject, and two to three years of experience in the design and architecture of laptop computers and other portable electronic devices. Alternatively, a POSA would have had an advanced degree (or equivalent) in electrical engineering, computer engineering, computer science, or a comparable subject and one year of post-graduate research or work experience in the design and architecture of laptop computers and other portable electronic devices. A POSA would have been familiar with the structural hardware aspects of laptop computers and other portable electronic devices, as well as designs of user interfaces employed and displayed by computer operating POSA could have acquired similar skills and knowledge by other means. Pet. 7 (citing Ex. 1004 ¶ 15). Patent Owner does not dispute Petitioner’s identification of the person of ordinary skill in the art. See generally Prelim. Resp. As Petitioner’s description of the person of ordinary skill is consistent with the subject matter of the ’688 patent and with the prior art of record, we apply it for purposes of this decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 9
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,289,688 - NXP USA, Inc. v. Bell Semiconductor, LLCInstitution deniedPTAB · May 15, 2024 · IPR2024-00142 · APJ John D Hamann · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood that claims 1–16 were unpatentable on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review under 35 U.S.C. § 314 (2018) and 37 C.F.R. § 42.4(a). An inter partes review may be instituted if “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the papers, we determine that the information presented in the Petition does not demonstrate a reasonable likelihood that Petitioner would prevail in establishing that at least one challenged claim is unpatentable. Accordingly, we deny the Petition and do not institute inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that one of ordinary skill in the art at the time of the invention of the ’330 patent “would have had at least the equivalent of a bachelor’s degree in electrical engineering and one to two years of experience in the field of circuit design, particularly the design of circuits operating at high frequencies.” Pet. 4 (citing Ex. 1002 ¶ 29). Patent Owner does not identify a level of skill in the art that one would have had at the time of the invention of the ’330 patent or identify any specific shortcoming in Petitioner’s definition. See Prelim. Resp. 7. For purposes of this Decision on Institution, we adopt Petitioner’s definition of the level of skill for one of ordinary skill in the art. Pet. 4. This definition is consistent with the ’330 patent and the asserted prior art, and we apply it in our analysis below.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction neededOther
“Petitioner argues that “no express constructions of the claims are necessary to assess whether the prior art reads on the challenged claims.” Pet. 8. However, Petitioner also cites to a Special Master Report and Recommendation on Claim Construction where “node” was construed to mean “a point of connection or intersection in an electrical circuit.” Id. at 9 (quoting Ex. 1015, 29). Patent Owner adopts this construction for purposes of this Decision on Institution. Prelim. Resp. 8. We find that this construction is consistent with the plain and ordinary meaning of the term “node.” We thus apply the construction as such to our analysis below, and we determine that we need not provide an express construction of any other claim term for purposes of this institution decision.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“[claim] limitation is found either expressly or inherently in a single prior art reference.” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 851 F.3d 1270, 1273 (Fed. Cir. 2017). “A claim limitation is inherent in the prior art if it is necessarily present in the prior art, not merely probably or possibly present.” Akamai Techs., Inc. v. Cable & Wireless Internet Servs., Inc., 344 F.3d 1186, 1192 (Fed. Cir. 2003) (citing Rosco, Inc. v. Mirror Lite, Co., 304 F.3d 1373, 1380 (Fed. Cir. 2002)). Moreover, “[t]o anticipate, the reference must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements arranged as in the claim.” Sanofi-Synthelabo v. Apotex, Inc., 550 F. 3d 1075, 1083 (Fed. Cir. 2008) (internal quotation marks omitted). In other words, it is not enough to be able to find all of the pieces of the claimed invention somewhere in a prior art reference; rather, those elements must be set out in the prior art reference in the same way they are in the claimed invention. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008) (“Because the hallmark of anticipation is prior invention, the prior art reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements ‘arranged as” slip op. at 9
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 7,535,330 - NXP USA, Inc. v. Bell Semiconductor, LLCInstitution deniedPTAB · May 13, 2024 · IPR2024-00167 · APJ Jeffrey W Abraham · IPR · Institution
The Board denied institution because Petitioner failed to show a reasonable likelihood that any challenged claim was unpatentable over the asserted anticipation and obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Upon consideration of the Petition, the Preliminary Response, and the evidence presented, we determine that Petitioner has not demonstrated a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 22
- BurdenDecided for patent owner
“For all of the foregoing reasons, Petitioner has failed to demonstrate sufficiently that Okabe discloses a semiconductor integrated circuit package with a first layer that includes “a first ground plane enabling electrical connection with low speed electronic circuitry” and a “second ground plane enabling electrical connection with high speed electronic circuitry.” Ex. 1001, 9:25–36.” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art would have had a “bachelor’s degree in a field relating to the integrated circuit package manufacturing process like materials science, physics, electrical engineering, or other related subjects, and at least two to three years of experience with fabrication and packaging of integrated circuits.” Pet. 4 (citing Ex. 1002 Preliminary Response. Prelim. Resp. 7. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art.” slip op. at 7
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Petitioner’s arguments are not persuasive. As Patent Owner and Dr. Bernstein point out, Petitioner does not specify the frequencies at which duplexer 45 and VCO 70 operate in Okabe. Prelim. Resp. 20; Ex. 2001 ¶ 79. Nor does Petitioner direct us to any criteria for classifying circuitry as “high speed” or “low speed.” Prelim. Resp. 20; Ex. 2001 ¶ 79. As a result, we are left with only the assertion of what a person of ordinary skill in the art would have understood about duplexer 45 and VCO 70. To support this assertion, Petitioner directs us to statements in Dr. Baker’s declaration that mirror the Petition. Pet. 26–27 (citing Ex. 1002 ¶¶ 71–73). Dr. Baker, however, does not cite to any supporting evidence or provide any technical reasoning to support his statements. Ex. 1002 ¶¶ 71–73. “Thus, the cited declaration testimony is conclusory and unsupported, adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark Inc., IPR2022-00624, Paper 9 at 15 (August 24, 2022) (precedential); see also 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Accordingly, Petitioner has failed to demonstrate sufficiently that Okabe discloses a second layer that includes a “third ground plane configured for electrical connection with low speed electronic circuitry” and a “fourth ground plane configured for electrical connection with high speed electronic circuitry.” Ex. 1001, 9:37– 43.” slip op. at 17
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,646,091 - Luminex International Co., Ltd. v. Signify Holdings B.V.Institution deniedPTAB · May 9, 2024 · IPR2024-00101 · APJ Steven M Amundson · IPR · Institution
The Board denied institution because Menard was a real party in interest served with an infringement complaint more than one year before the Petition was filed.
RulingsInstitution decision- PTAB / AIA Trials › §315(b) time barInstitution denied time barDenied
“Thus, the evidence shows that: (1) Petitioner and Menard are parties to an agreement; (2) under the agreement, Petitioner supplies accused products to Menard; (3) the agreement includes an indemnity provision; (4) under the agreement, Menard made multiple demands for Petitioner to “indemnify or defend as a matter of first defense”; and (5) Petitioner responded to Menard’s multiple demands by, among other things, filing the Petition challenging the claims in the ’336 patent. See Ex. 2001 ¶¶ 21, 24–26, 28–29, 32–33, 35; Ex. 2002, 5–9 (¶¶ 21, 24–26, 28–29, 32–33, 35); Ex. 2013, 5–9 (¶¶ 21, 24–26, 28–29, 32–33, 35); Ex. 3003 ¶¶ 21, 24–26, 28–29, 32–33, 35. That Petitioner responded to Menard’s multiple demands for Petitioner to “indemnify or defend as a matter of first defense” by filing the Petition shows that the Petition was filed at Menard’s “behest.” Specifically, Menard demanded defense from infringement liability, and Petitioner responded by initiating this proceeding seeking to free Menard from infringement liability for all 20 claims in the ’336 patent. See Pet. 15–89.” slip op. at 36
- PTAB / AIA Trials › Real party in interest / privityDecided for patent owner
“For the real-party-in-interest analysis, we initially consider “whether a petition has been filed at a nonparty’s ‘behest,’” i.e., “the heart of the inquiry.” Uniloc 2017, 989 F.3d at 1027–28; AIT, 897 F.3d at 1351; CTPG at 14. In its third-party complaints, Menard alleged that it and Petitioner “are parties to a Menards Customer Returns, Defective Goods Policy and Conditions of Order Agreement” that requires Petitioner to “indemnify, defend and hold harmless Menard from and against any claims, litigation, or suits,” including “patent infringement arising from Menard’s use, sale or offering for sale of any goods provided by” Petitioner. Ex. 2001 ¶¶ 21, 24, 26, 28; Ex. 3003 ¶¶ 21, 24, 26, 28. Menard also alleged that the Conditions of Order Agreement requires Petitioner to “indemnify or defend as a matter of first defense and payment, not as a matter of reimbursement.” Ex. 2001 ¶ 29; Ex. 3003 ¶ 29.” slip op. at 35
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied
“to institute an inter partes review. We may institute an inter partes review only if “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). The “reasonable likelihood” standard is “a higher standard than mere notice pleading” but “lower than the ‘preponderance’ standard to prevail in a final written decision.” Hulu, LLC v. Sound View Innovations, LLC, IPR2018- 01039, Paper 29 at 13 (PTAB Dec. 20, 2019) (precedential).” slip op. at 2
Discretionary denialPatents in suitUS 10,299,336 - Fitesa Simpsonville, Inc. v. The Procter & Gamble CompanyInstitution deniedPTAB · Mar 20, 2024 · IPR2023-01450 · APJ Avelyn M Ross · IPR · Institution
The Board denied institution on all challenged claims under § 325(d), finding the cited art previously considered or cumulative and no material Office error shown.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2019). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition, the Preliminary Response, the Reply, the Sur-reply, and evidence of record, we exercise our discretion under 35 U.S.C. § 325(d) to deny institution of an inter partes review.” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“inter partes review, “the Director may take into account whether, and reject the petition or request because, the same or substantially the same prior art or arguments previously were presented to the Office.” The Board uses a two-part framework in determining whether to exercise its discretion under § 325(d), specifically: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of the first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. Advanced Bionics, LLC v. Med-El Elektromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 8 (PTAB Feb. 13, 2020) (precedential).” slip op. at 9
Discretionary denialcites PhillipsPatents in suitUS 10,513,801 - Fitesa Simpsonville, Inc. v. The Procter & Gamble CompanyInstitution deniedPTAB · Mar 20, 2024 · IPR2023-01451 · APJ Avelyn M Ross · IPR · Institution
The Board denied institution on all challenged claims under § 325(d), finding the prior art previously considered and no material error by the Office.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“b) Advanced Bionics Framework Part (2) Having determined that the “same or substantially the same prior art” previously was presented to the Office, we now consider whether Petitioner sufficiently demonstrates that the Office materially erred. In assessing the second part of the Advanced Bionics Framework, we consider Becton, Dickinson factors (c), (e), and (f) to determine whether material error has been shown. Advanced Bionics, Paper 6 at 10. “An example of a material error may include misapprehending or overlooking specific teachings of the relevant prior art where those teachings impact patentability of the challenged claims.” Id. However, “[i]f reasonable minds can disagree regarding the purported treatment of the art or arguments, it cannot be said that the Office erred in a manner material to patentability.” Id. at 9. Petitioner bears the burden of showing that the Examiner materially erred. Id. at 8.” slip op. at 19
Discretionary denialcites PhillipsPatents in suitUS 11,326,276 - Amperex Technology Ltd. v. Semiconductor Energy Laboratory Co., Ltd.Institution deniedPTAB · Mar 12, 2024 · IPR2023-01349 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving any challenged claim unpatentable on the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine the information presented in the Petition does not establish a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we do not institute an inter partes review of any claim on any ground asserted in the Petition.” slip op. at 2
- BurdenDenied
“Given this, to show that Blangero’s disclosure of MgO or LiF in its coating teaches or suggests a rock-salt crystal structure, Petitioner needs to explain why a person of ordinary skill in the art either would have understood the compounds to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO or LiF in a rock-salt crystal structure rather than in another available form. On the first point, Petitioner argues that “‘the stable phase at room temperature and pressure conditions’ of MgO is ‘a rocksalt cubic structure of NaCl (space group Fm-3m).’” Pet. 28 (quoting Ex. 1030, 16; citing Ex. 1003 ¶ 142). But, as Petitioner’s declarant, Dr. Hayes, points out, Blangero does not teach forming MgO in a room-temperature process. Ex. 1003 ¶ 142 (Blangero’s “second firing step” occurs at “925 °C for 12 hours”); see Ex. 1005 ¶ 110 (teaching the firing step to which Dr. Hayes refers). Thus, the significance of rock-salt-type MgO being “the stable phase at room temperature and pressure conditions” is unclear. To the extent that Dr. Hayes explains why MgO, which “is well known to crystallize even at substantially lower temperatures,” such as “room temperature and pressure conditions,” would “do so more readily at [a higher temperature of] 925 °C,” this argument is not discussed, nor even cited, in the Petition. Ex. 1003 ¶¶ 90–94; see Pet. 28. Accordingly, any reliance on this argument by Petitioner constitutes improper incorporation by reference. 37 C.F.R. § 42.6(a)(3). Thus, Petitioner does not show sufficiently that a person of ordinary skill in the art either would have understood MgO to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO in a rock-salt crystal structure rather than in another available form. Similarly, with respect to LiF, neither Petitioner nor Dr. Hayes sufficiently explains the choice of rock-salt-type material over other options. Pet. 29 (arguing only that Ex. 1013 shows that “LiF has rock salt structure”); Ex. 1003 ¶ 143 (same). Thus, Petitioner does not show sufficiently that Blangero teaches or suggests a rock-salt crystal structure by virtue of its teaching that either MgO or LiF is present.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not found
“The 2012 study on which Petitioner relies did not find “superior structural stability” over other lithium-titanium-oxygen compounds, as Petitioner argues. Instead, the study noted that the structure of “LiTiO2 prepared by high-temperature sintering TiO2 with lithium salt . . . impl[ies] LiTiO2 has superior structural stability in organic electrolyte as compared to other Li-Ti-O oxides.” Ex. 1029, 1. Thus, the structural stability was implied from the chemical structure of the material rather than found through study of the material. Moreover, the implied structural stability was only for LiTiO2 that was prepared in a particular way, by high-temperature sintering of TiO2 with lithium salt, and Petitioner does not allege that a person of ordinary skill in the art would have prepared the LiTiO2 they substituted for Blangero’s Li2TiO3 using this method. As for Petitioner’s argument that the study found that LiTiO2 outperformed Li2TiO3, we are not persuaded. The study compared particles with an LiTiO2 coating to uncoated particles, not to particles coated with Li2TiO3. Ex. 1029, 4, Figs. 4(c), 4(d). Although the study notes that particles coated with “[m]onoclinic Li2TiO3 and spinel Li4Ti5O12” exhibit “a noticeable capacity decay . . . when charged at high operating voltage and cycled above room temperature,” it concludes only that particles coated with LiTiO2 “exhibited inspiring high-voltage cycling capability as well as thermal stability than the pristine counterpart.” Id. at 1, 4. In addition, the pristine particles used in the study were made from “Li[NixCoyMnz]O2 (0≤x,y,z<1) (called as LNCM),” and the particles in Blangero do not contain either nickel or manganese in their cores. Ex. 1005 ¶¶ 9–40 (particles contain lithium, oxygen, cobalt, and metals chosen from the group consisting of aluminum, gallium, boron, magnesium, titanium, iron, copper, calcium, barium, yttrium, tin, antimony, sodium, zinc, zirconium, silicon); Ex. 1029, 1. Petitioner does not explain why a person of ordinary skill in the art would expect the study’s results to extend to Blangero’s particles made from a different material. Pet. 29–30. Because Petitioner has not shown sufficiently that Blangero teaches or suggests a second region comprising a rock-salt crystal structure or that a person of ordinary skill in the art would have had a reason to substitute rocksalt-type LiTiO2 for the materials disclosed in Blangero, Petitioner has not shown a reasonable likelihood that it would prevail on claim 1 on its Blangero-based grounds.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner, “[i]ndividuals with different education and additional experience could still [have been] of ordinary skill in the art if that additional experience compensate[d] for a deficit in their education and experience.” Id. On the present record, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art. Prelim. Resp. 19. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’660 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’660 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,043,660
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.