• Samsung Electronics America, Inc. / Samsung Electronics Co., Ltd. v. Collision Communications, Inc.Institution denied
  PTAB · Mar 21, 2025 · IPR2024-01250 · APJ Bart A Gerstenblith · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–5, 7, 9–16, or 20 unpatentable over the asserted grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “An inter partes review may be instituted only if “the information presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner, supported by Dr. Min’s testimony, proposes that a person of ordinary skill in the art at the time of the invention would have had “at least a bachelor’s [degree] in [electrical engineering, computer engineering, or computer science], physics, or equivalent, and two years of experience with cellular telecommunications, radio-access network architectures, protocols and signal propagation in wireless networks.” Pet. 3 (citing Ex. 1003 ¶ 59). Dr. Min testifies that “[a]dditional education could substitute for professional experience and vice versa.” Ex. 1003 ¶ 59. Additionally, Petitioner contends that Dr. Min “exceeded this level of experience by the priority date.” Pet. 3 (citing Ex. 1010 (curriculum vitae of Dr. Min)). In its Preliminary Response, Patent Owner does not take a position on the relevant level of ordinary skill in the art. See generally Prelim. Resp. At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’946 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Neither party contends that any claim terms require an express construction to resolve the present controversy. Pet. 8 (“For purposes of this Petition only, Petitioner does not believe any terms require a formal construction.”); see generally Prelim. Resp. Nonetheless, Petitioner explains that the Petition is structured such that “Ground 1 is based on Patent Owner’s infringement contentions in the district court litigation, where the claimed ‘MUD module’ is generally mapped to multiple-input multiple-output (MIMO) receivers in a wireless network.” Pet. 2. Petitioner contends that “[u]nder this broad interpretation of a ‘MUD module,’ Walton’s MIMO receiver renders every challenged claim obvious.” Id. In contrast to Ground 1, the Petition states that “Ground 2 is based on the plain meaning of ‘MUD module,’ which is a component that detects, separates, and decodes signals from multiple users transmitting simultaneously over the same frequency band.” Id. Petitioner contends that, “[a]pplying the correct meaning of the term, Walton’s MIMO receiver does not necessarily comprise a MUD module.” Id. Therefore, Petitioner explains that “Ground 2 combines Walton with Learned, which expressly discloses [a] multi-user detector, and thus renders every challenged claim obvious in combination with Walton.” Id. at 2–3.7 In other words, the Petition presents Ground 1 and Grounds 2/3 as alternatives depending on the meaning of 7 Although not specifically relevant to claim construction, Petitioner explains that “Ground 3 further combines Walton and Learned with Quigley, to the extent Patent Owner argues Walton does not disclose providing a burst control input.” Pet. 3. “MUD module,” where Ground 1 is based on Petitioner’s understanding of Patent Owner’s interpretation of the term and Grounds 2 and 3 are based on Petitioner’s interpretation of the term as having its plain meaning. Petitioner further contends that “[e]very other claim term carries its ‘ordinary and customary meaning’ . . . .” Id. at 8. Although Petitioner presents a potential dispute regarding the meaning of “MUD module,” we need not construe this term expressly because the determination we reach herein does not depend on which meaning MUD module is applied. Accordingly, we do not construe any claim terms expressly because express constructions are not necessary to resolve the controversy before us. See Realtime Data, 912 F.3d at 1375.” slip op. at 12

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Not reached

    “IV. DISCRETIONARY DENIAL Patent Owners contends that the factors set forth in Apple Inc. v. Fintiv, Inc., IPR2020-00019, Paper 11 at 9 (PTAB Mar. 20, 2020) (precedential), weigh heavily in favor of discretionary denial. Prelim. Resp. 40–46; Paper 10. Petitioner disagrees. Pet. 74–77; Paper 9. In light of the conclusion reached above, we need not address the parties’ arguments regarding discretionary denial.” slip op. at 25

  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 8,089,946
• Samsung Electronics America, Inc. / Samsung Electronics Co., Ltd. v. Collision Communications, Inc.Institution denied
  PTAB · Mar 21, 2025 · IPR2024-01248 · APJ Bart A Gerstenblith · IPR · Institution

  The Board denied institution because the Petition did not show a reasonable likelihood of proving claims 1–11, 16, and 21 unpatentable over the asserted obviousness grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “presented in the petition . . . and any [preliminary] response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). For the reasons given below, on this record Petitioner has not established a reasonable likelihood that it would prevail in showing the unpatentability of any of the Challenged Claims. Accordingly, we do not institute an inter partes review.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “At this stage of the proceeding and on the present record, we adopt Petitioner’s uncontested proposed level of ordinary skill in the art, which we find consistent with the level of ordinary skill in the art reflected by the ’071 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes a specific construction of any claim term, although Petitioner contends each term should be construed according to its plain and ordinary meaning. Pet. 16; see generally Prelim. Resp. Accordingly, we need not construe any claim terms expressly because the meaning of the terms is not in dispute and an express construction is not necessary to resolve the controversy before us.” slip op. at 13

  • BurdenNot shown unpatentable

    “We find the Petition lacking in particularity because it does not clearly identify what aspect of Jin is alleged to teach the unique signal parameters (or unique estimated signal parameters) recited in claim 1. See, e.g., 35 U.S.C. § 312(a)(3) (“A petition filed under section 311 may be considered only if — (3) the petition identifies, in writing and with particularity, . . . the evidence that supports the ground for the challenge to each claim . . . .”). First, as reflected above, the Petition asserts that something called a “unique pilot parameter” teaches the recited unique estimated signal parameters. But “unique pilot parameter” is not a term or phrase recited in Jin. See Prelim. Resp. 19 (arguing the same). So, when Petitioner states “Jin discloses that the base station uses the unique pilot parameter (i.e., ‘unique estimated signal parameters’) to ‘identify which user (i.e., mobile terminal) has transmitted the received data,’” it is not clear what element in Jin Petitioner intends to identify by the term “unique pilot parameter.” Dr. Min’s testimony does not help resolve the ambiguity in the Petition. In particular, Dr. Min also refers to a “unique pilot parameter (i.e., ‘unique signal parameter’) for each user.” Ex. 1003 ¶ 89. But, as noted above, Jin does not disclose an element referred to as a “pilot parameter” and it is not clear what element Dr. Min intended to identify in Jin.8” slip op. at 18

  Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 9,814,071
• Shenzhen Waydoo Intelligence Technology Co., Ltd. v. MHL Custom, Inc.Institution denied
  PTAB · Dec 17, 2024 · IPR2024-00999 · APJ Michael L Woods · IPR · Institution

  The Board denied joinder and denied institution on all challenged claims and grounds because the petition was time-barred under § 315(b).

  RulingsInstitution decision

  • PTAB / AIA Trials › §315(b) time barInstitution denied time barDenied

    “Whether we institute review depends on whether we grant Petitioner’s Motion for Joinder. If granted, the one-year bar does not apply. See 35 U.S.C. § 315(b). If denied, the Petition is time-barred. See id.” slip op. at 6

  • PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, deniedDenied

    “As in Code200 I, Petitioner provides no explanation as to why it did not file a petition seeking inter partes review of the ’659 patent within the one-year window. See generally Mot.; see also Opp. 2 (“Petitioner offers no explanation for why it waited over three years to seek to challenge the patent through IPR proceedings.”). Furthermore, Petitioner provides no explanation as to why joinder would be fair or otherwise in the interests of justice. See generally Mot.; see also Opp. 2 (“Petitioner offers no explanation for how joinder would be fair to, and not otherwise prejudice, Patent Owner.”). Accordingly, Petitioner has failed to establish that it is entitled to the requested relief under our Rules. See 37 C.F.R. §§ 42.1, 42.20(c). For the forgoing reasons, we exercise our discretion to deny Petitioner’s Motion for Joinder.” slip op. at 13

  Discretionary denial
  Patents in suitUS 9,586,659
• Shenzhen Waydoo Intelligence Technology Co., Ltd. v. MHL Custom, Inc.Institution denied
  PTAB · Dec 17, 2024 · IPR2024-00998 · APJ Michael L Woods · IPR · Institution

  The Board denied joinder and denied institution on all challenged claims because the petition was time-barred under § 315(b).

  RulingsInstitution decision

  • PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, deniedDenied

    “establish that it is entitled to the requested relief.” See 37 C.F.R. § 42.20(c). Regarding joinder, the relevant statute provides that: If the Director institutes an inter partes review, the Director, in his or her discretion, may join as a party to that inter partes review any person who properly files a petition under section 311 that the Director, after receiving a preliminary response under section 313 or the expiration of the time for filing such a response, determines warrants the institution of an inter partes review under section 314. 35 U.S.C. § 315(c).” slip op. at 5

  • PTAB / AIA Trials › §315(b) time barInstitution denied time barInstitution denied

    “This statute further provides that the petition for inter partes review must be filed no later than “1 year after the date on which the petitioner, real party in interest, or privy of the petitioner is served with a complaint alleging infringement of the patent.” 35 U.S.C. § 315(b); see also 37 C.F.R. § 42.101(b). This one-year time bar, however, “shall not apply to a request for joinder.” 35 U.S.C. § 315(b); see also 37 C.F.R. § 42.122(b).” slip op. at 5

  Discretionary denial
  Patents in suitUS 9,359,044
• Honeywell International Inc. v. DSM IP Assets B.V.Institution denied
  PTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution

  The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23

  • Skill levelOther

    “PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner

    “a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner

    “Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,280,532
• Nespresso USA, Inc. v. K-Fee System GmbHInstitution denied
  PTAB · Jun 10, 2024 · IPR2024-00239 · APJ Jon B Tornquist · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–20 would have been obvious over either asserted combination.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner does not demonstrate a reasonable likelihood of prevailing with respect to any of claims 1–20 of the ’094 patent. Accordingly, we do not institute an inter partes review.” slip op. at 2

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “The express language of the claim, however, does not support using the “central axis” as the measuring point for determining if one object is laterally offset from another. For example, the term “central axis” is not used in the relevant claim phrase and the dictionary definitions of “lateral” relied upon by Petitioner and Mr. Jobin to show the ordinary meaning of the claim term do not suggest that the “central axis” is the reference point for determining whether a first object is “laterally offset” from a second object. As such, we determine that the claim language supports Patent Owner’s construction requiring that the “groove” be “off to the side” of the entire mandrel, and not merely the “central axis” of the mandrel. Prelim. Resp. 54. We must also resolve whether the entire groove is required to be laterally offset from the chamfered mandrel, or only a portion of it. On this point, the claims do not use the term “portion,” but rather specify that the “groove” is “laterally offset from the chamfered mandrel.” Ex. 1001, 14:4– 5, 15:19–20. This suggests that the entire “groove” must be offset from the “chamfered mandrel.”” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “That argument, however, does not explain why it would have been obvious to laterally offset the groove of Yoakim from the chamfered mandrel. Rather, as demonstrated by Mr. Jobin’s testimony, this argument relates to the general use of a sealing member in a groove, to the extent it was ultimately determined that such a configuration is not expressly disclosed in Yoakim. Id.; Ex. 1003 ¶ 296 (“It would have been obvious to one skilled in the art to position a sealing member in a groove to solidify the between counter-force portion 161 and engaging portion 157 in Figure 35 of Yoakim is more appropriately identified as the claimed “groove.” Prelim. Resp. 60–61. We need not resolve this issue, however, as Petitioner does not persuasively demonstrate that either potential “groove” is “laterally offset” from the chamfered mandrel. placement of the seal and improve its sealing stability and strength. Furthermore, it would have been obvious to one skilled in the art to utilize a groove and seal configuration in the brewing head . . . .”) (emphasis added). Even if we interpret the recited portion of the Petition as an argument for placing the groove entirely to the side of the mandrel in Yoakim, the Petition does not persuasively explain why one of ordinary skill in the art would have sought to do so. In Figure 35 of Yoakim, the seal and groove, as well as an elastic loading means, act as a valve means to control the level of pressure exerted in the capsule and “optimize interaction of water and the ground coffee particles to obtain a good extraction of the coffee and aroma compounds.” Ex. 1004 ¶¶ 370–372, 382, 396–398, 434–436, 445; Ex. 1003 ¶¶ 286–290; Pet. 63. These are the same beneficial properties relied upon by Petitioner to support the proposed combination, and Petitioner does not persuasively explain why one of ordinary skill in the art would have modified Yoakim in order to achieve results that are already obtained in the identified embodiment. Pet. 63. In view of the foregoing, we determine that Petitioner does not demonstrate a reasonable likelihood that claims 1 and 12 would have been obvious over the combined disclosures of Yoakim, Jarisch 929, and Rossi.” slip op. at 20

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,542,094
• Mahle Behr Charleston Inc. v. Frank Amidio CatalanoOther
  PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand

  The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.

  RulingsRemand decision

  • RemandOther

    “Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5

  • BurdenNot shown unpatentable

    “Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11

  Claim constructioncites Phillips
• Samsung Electronics Co., Ltd. v. Advanced Coding Technologies, LLCInstitution denied
  PTAB · May 23, 2024 · IPR2024-00062 · APJ Nathan A Engels · IPR · Institution

  The Board denied institution because Petitioner did not show that the prior art disclosed or taught the construed “emphasis level” limitation in any challenged claim.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “which the amplitude of the high frequency components of the video signal is increased,” as required by the construction of “emphasis level.”7 See Prelim. Resp. 9 (“the Petition’s analysis of the claim limitations containing these terms against the cited references does not indicate that those references disclose these limitations under Petitioner’s proposed constructions in the District Court Action”). Thus, without Petitioner mapping the constructions to the prior art in a clear and identifiable way, we determine the Petition itself does not satisfy Petitioner’s burden. See 37 C.F.R. §§ 42.104(b)(3)– (4).” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner

    “the terms “emphasis processing” and “emphasis level.” In the Petition, Petitioner states that no constructions are necessary (Pet. 2), but after filing 2 US 5,491,514; issued Feb. 13, 1996. Ex. 1005. 3 US 5,241,387; issued Aug. 31, 1993. Ex. 1006. 4 US 6,801,665 B1; published Sept. 30, 1999. Ex. 1007. the Petition, Petitioner proposed constructions of those terms in the parties’ district-court litigation, stating that: (i) the claim term “emphasis processing” means “increasing the amplitude of the high frequency components of a video signal;” and (ii) the claim term “emphasis level” means “a value that represents the amount by which the amplitude of the high frequency components of the video signal is increased.” Ex. 2003, 10– 11. After Patent Owner relied on those constructions in its Preliminary Response (see, e.g., Prelim. Resp. 8–10),5 Petitioner requested (Ex. 3001), and the Board authorized (Paper 8), additional briefing to address how the analysis in the Petition applies under those constructions.6 Because we determine Petitioner’s showings with respect to those constructions are inadequate to carry Petitioner’s burden, our discussion below focuses primarily on those aspects of the parties’ briefing.” slip op. at 4

  • PTAB / AIA Trials › Discretionary denialNot reached

    “Discretionary Denial Because we determine Petitioner has not carried its burden on the merits, we do not reach the parties’ arguments relating to discretionary denial. See Pet. 98–99; Prelim. Resp. 26–32.” slip op. at 11

  Claim constructionDiscretionary denial
  Patents in suitUS 6,845,128
• Mara Renewables Corporation v. DSM IP Assets, B.V.Institution denied
  PTAB · Apr 18, 2024 · IPR2024-00070 · APJ Zhenyu Yang · IPR · Institution

  The Board denied institution because the Petition did not show a reasonable likelihood that claims 1–15 were anticipated by Radianingtyas or obvious over either asserted combination.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “We have authority under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has not demonstrated a reasonable likelihood that it would prevail with respect to at least one claim challenged in the Petition. Accordingly, we deny institution of an inter partes review.” slip op. at 2

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, we construe the claim term “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id.; see also Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (holding that the words of a claim “are generally given their ordinary and customary meaning,” which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application”). Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to construe any claim term.” slip op. at 6

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not provide a definition of the level of ordinary skill in the art. See Prelim. Resp. 19. Patent Owner also states that any differences between the parties’ proposed definition of the skill level would not impact its arguments. Id. For purposes of this Decision, we adopt Petitioner’s definition of the skill level because it is consistent with the prior art’s demonstration of the level of ordinary skill at the relevant time. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “triglyceride, DHA, and heptadecanoic acid content recited therein. In order to anticipate a claim, a prior art reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements arranged as in the claim.” NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008) (quotation marks omitted). A reference, however, can anticipate a claim “even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Microsoft Corp. v. Biscotti, Inc., 878 F.3d 1052, 1068 (Fed. Cir. 2017) (quotation marks and brackets omitted). As explained below, here, Petitioner has not shown Radianingtyas discloses a microbial oil comprising the required triglyceride, DHA and heptadecanoic acid content. Specifically, although the exemplified strain ONC-T18 produces oil that meets the claimed triglyceride fraction and heptadecanoic acid level, Petitioner has not shown the same oil contains the recited DHA level.” slip op. at 10

  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 8,207,363
• Amperex Technology Ltd. v. Semiconductor Energy Laboratory Co., Ltd.Institution denied
  PTAB · Mar 12, 2024 · IPR2023-01349 · APJ Christopher M Kaiser · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of proving any challenged claim unpatentable on the asserted obviousness grounds.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine the information presented in the Petition does not establish a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we do not institute an inter partes review of any claim on any ground asserted in the Petition.” slip op. at 2

  • BurdenDenied

    “Given this, to show that Blangero’s disclosure of MgO or LiF in its coating teaches or suggests a rock-salt crystal structure, Petitioner needs to explain why a person of ordinary skill in the art either would have understood the compounds to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO or LiF in a rock-salt crystal structure rather than in another available form. On the first point, Petitioner argues that “‘the stable phase at room temperature and pressure conditions’ of MgO is ‘a rocksalt cubic structure of NaCl (space group Fm-3m).’” Pet. 28 (quoting Ex. 1030, 16; citing Ex. 1003 ¶ 142). But, as Petitioner’s declarant, Dr. Hayes, points out, Blangero does not teach forming MgO in a room-temperature process. Ex. 1003 ¶ 142 (Blangero’s “second firing step” occurs at “925 °C for 12 hours”); see Ex. 1005 ¶ 110 (teaching the firing step to which Dr. Hayes refers). Thus, the significance of rock-salt-type MgO being “the stable phase at room temperature and pressure conditions” is unclear. To the extent that Dr. Hayes explains why MgO, which “is well known to crystallize even at substantially lower temperatures,” such as “room temperature and pressure conditions,” would “do so more readily at [a higher temperature of] 925 °C,” this argument is not discussed, nor even cited, in the Petition. Ex. 1003 ¶¶ 90–94; see Pet. 28. Accordingly, any reliance on this argument by Petitioner constitutes improper incorporation by reference. 37 C.F.R. § 42.6(a)(3). Thus, Petitioner does not show sufficiently that a person of ordinary skill in the art either would have understood MgO to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO in a rock-salt crystal structure rather than in another available form. Similarly, with respect to LiF, neither Petitioner nor Dr. Hayes sufficiently explains the choice of rock-salt-type material over other options. Pet. 29 (arguing only that Ex. 1013 shows that “LiF has rock salt structure”); Ex. 1003 ¶ 143 (same). Thus, Petitioner does not show sufficiently that Blangero teaches or suggests a rock-salt crystal structure by virtue of its teaching that either MgO or LiF is present.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not found

    “The 2012 study on which Petitioner relies did not find “superior structural stability” over other lithium-titanium-oxygen compounds, as Petitioner argues. Instead, the study noted that the structure of “LiTiO2 prepared by high-temperature sintering TiO2 with lithium salt . . . impl[ies] LiTiO2 has superior structural stability in organic electrolyte as compared to other Li-Ti-O oxides.” Ex. 1029, 1. Thus, the structural stability was implied from the chemical structure of the material rather than found through study of the material. Moreover, the implied structural stability was only for LiTiO2 that was prepared in a particular way, by high-temperature sintering of TiO2 with lithium salt, and Petitioner does not allege that a person of ordinary skill in the art would have prepared the LiTiO2 they substituted for Blangero’s Li2TiO3 using this method. As for Petitioner’s argument that the study found that LiTiO2 outperformed Li2TiO3, we are not persuaded. The study compared particles with an LiTiO2 coating to uncoated particles, not to particles coated with Li2TiO3. Ex. 1029, 4, Figs. 4(c), 4(d). Although the study notes that particles coated with “[m]onoclinic Li2TiO3 and spinel Li4Ti5O12” exhibit “a noticeable capacity decay . . . when charged at high operating voltage and cycled above room temperature,” it concludes only that particles coated with LiTiO2 “exhibited inspiring high-voltage cycling capability as well as thermal stability than the pristine counterpart.” Id. at 1, 4. In addition, the pristine particles used in the study were made from “Li[NixCoyMnz]O2 (0≤x,y,z<1) (called as LNCM),” and the particles in Blangero do not contain either nickel or manganese in their cores. Ex. 1005 ¶¶ 9–40 (particles contain lithium, oxygen, cobalt, and metals chosen from the group consisting of aluminum, gallium, boron, magnesium, titanium, iron, copper, calcium, barium, yttrium, tin, antimony, sodium, zinc, zirconium, silicon); Ex. 1029, 1. Petitioner does not explain why a person of ordinary skill in the art would expect the study’s results to extend to Blangero’s particles made from a different material. Pet. 29–30. Because Petitioner has not shown sufficiently that Blangero teaches or suggests a second region comprising a rock-salt crystal structure or that a person of ordinary skill in the art would have had a reason to substitute rocksalt-type LiTiO2 for the materials disclosed in Blangero, Petitioner has not shown a reasonable likelihood that it would prevail on claim 1 on its Blangero-based grounds.” slip op. at 15

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner, “[i]ndividuals with different education and additional experience could still [have been] of ordinary skill in the art if that additional experience compensate[d] for a deficit in their education and experience.” Id. On the present record, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art. Prelim. Resp. 19. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’660 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’660 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,043,660

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.