- Ascend Elements, Inc. v. Duesenfeld GmbHInstitution deniedPTAB · Oct 10, 2025 · PGR2025-00037 · APJ Kevin W Cherry · PGR · Institution
The Board denied institution of PGR on claims 1–14 because Petitioner did not show that any challenged claim was more likely than not unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition filed under [35 U.S.C. §] 321 . . . demonstrates that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons set forth below, we determine that Petitioner has failed to demonstrate that it is more likely than not that at least one of claims 1–14 of the ’463 patent is unpatentable. Accordingly, we deny institution of a postgrant review of claims 1–14 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had at least a Bachelor’s degree in electrical engineering, material science, chemical engineering, or an equivalent field, as well as at least 2 to 3 years of academic or industry experience in the recycling or processing of lithiumion batteries. Additional formal education focusing on processing of lithium batteries may substitute for practical experience and additional practical experience can substitute for less education.” Pet. 10–11. Patent Owner does not contest this definition of a person of skill in the art. See Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as, on the present record, it appears consistent with the ’463 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“distinct from “comminute[ion],” Petitioner offers only the testimony of its expert, Mr. Juzkow, who equates Tomioka’s “cutting” with “comminute[ion].” See Ex. 1003 ¶ 121. However, Mr. Juzkow provides insufficient reasoning to support his conclusion, particularly given the intrinsic and extrinsic evidence discussed above. In contrast, Patent Owner’s expert, Mr. Dantam, provides extensive reasoning, supported by citations to other evidence, to support his conclusion that Tomioka’s “dismantling” is not the claimed “comminution.” Thus, we give more weight to Mr. Dantam’s testimony than Mr. Juzkow’s testimony. Weighing this evidence all together, we find that Petitioner has failed to show that it is more likely than not that Tomioka’s teaches the claimed comminution under Petitioner’s first theory.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundTeaching away not foundNot shown unpatentable
“obvious. Pet. 34–35. However, we agree with Patent Owner that Petitioner has also failed to show that it is more likely than not that Tomioka renders this limitation obvious. See Prelim. Resp. 28–31. To begin with, Petitioner’s contentions lack sufficient reasoning explaining why a person of ordinary skill would have modified Tomioka in the manner proposed. “[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006). Petitioner merely asserts that a person of ordinary skill in the art could use the roller system in place of the dismantling disclosed for the embodiments in Figures 19 and 20. On this record, we find this bare contention insufficient. actual disclosure of Tomioka. The rollers in Tomioka are used to separate the “battery body” from the “resin package enclosing the battery body,” and Tomioka specifically discloses that this technique is designed to “avoid damaging the battery body.” Ex. 1005 ¶¶ 25, 26, 29; Ex. 2011 ¶¶ 72–73. Thus, there is a significant difference between what Tomioka teaches and what Petitioner proposes to use the roller system to do. In addition, as Patent Owner points out, Tomioka specifically discloses there are risks associated with mechanically crushing battery packs, such as “risk of sparking due to residual voltage if the battery units are damaged in the process.” Ex. 1005 ¶ 5. Although we do not agree with Patent Owner that this amounts to a “teaching away,” see In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994), we do believe that this teaching suggests a trade off that should be weighed in determining whether to make the modification, see Medichem S.A. v. Rolabo S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). However, Petitioner has failed to account adequately, if at all, for this trade off. Thus, we find that Petitioner has failed to show that it is more likely than not that Tomioka accounts for the claimed “comminuting.”” slip op. at 15
§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 12,119,463 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing deniedPTAB · Oct 7, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Rehearing
The Board denied Solus’s rehearing request, leaving institution denied for claims 1–8 because the petition did not adequately show motivation to combine Hanafusa and Dobashi.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve Dobashi’s RSm values. Dobashi teaches that because RSm “can be adopted as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66–3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66– 3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 4
§ 103 obviousnessPatents in suitUS 11,346,014 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing deniedPTAB · Oct 7, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Rehearing
The Board denied rehearing and left in place its denial of institution because Petitioner did not show that claims 1–10 were likely obvious over the asserted combinations.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“II. STANDARD OF REVIEW When rehearing a decision on institution, we do not review the merits of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors.” Arnold Partnership v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004) (citing In re 1 US 2013/0108922 A1, published May 2, 2013 (Ex. 1004, “Shinozaki”). 2 G. Khatibi, Temperature Dependent Elastic and Thermal Properties of Thin Copper Foils, Copper; Proceedings of the International Conference Copper ’06 (2006) (Ex. 1006, “Khatibi”). 3 Korean Patent Pub. No. 10-2012-0003485, published Jan. 10, 2012 (Ex. 1013; Ex. 1014 (English translation), “Toshio”). 4 US 2013/0108887 A1, published May 2, 2013 (Ex. 1012, “Kim”). 5 Griesi, M.B., Characterization of Electrodeposited Copper Foil Surface Roughness for Accurate Conductor Power Loss Modeling (2014) (Master’s Thesis, University of South Carolina) (Ex. 1015, “Griesi”). rehearing has the burden to show that the decision should be modified. 37 C.F.R. § 42.71(d). Additionally, the request for rehearing “must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply.” Id.” slip op. at 2
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Not shown unpatentable
“For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE[6] value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added).” slip op. at 4
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Petitioner, however, does not adequately explain why a POSITA would have been motivated to modify Kim’s copper foil surface to have a Pc value of 19.2 as reported in Griesi. In particular, neither Petitioner nor Dr. Randall points us to, nor do we discern, any teaching in Griesi that a peak count of 19.2 provides any particular benefits or properties that would have lead a POSITA to modify Kim’s copper foil surface as Petitioner proposes. Instead, Petitioner’s arguments that a POSITA would have been motivated to modify Kim’s copper foil surface with Griesi’s peak count patent itself. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 421 (2007) (stating that the fact finder must be aware “of the distortion caused by hindsight bias and must be cautious of arguments reliant upon ex post reasoning”). It was Petitioner’s burden to establish that the combined teachings Kim and Griesi disclose limitation [1g] as proposed. We are not persuaded that we misapprehended Petitioner’s argument when we determined that Petitioner did not meet that burden.” slip op. at 8
- BurdenDecided for patent owner
“It was Petitioner’s burden to establish the Khatibi, alone or in combination with Shinozaki, Toshio, and Kim, discloses limitation [1d]. We concluded that Petitioner failed to meet that burden for the reasons explained in our Decision. We are not persuaded that we overlooked or misapprehended Khatibi’s disclosures, or Petitioner’s evidence and explanation thereof, in doing so.7” slip op. at 5
§ 103 obviousnesscites KSRPatents in suitUS 10,811,689 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 23, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were unpatentable over either asserted § 103 ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had at least an undergraduate degree in materials science, chemical engineering, electrical engineering, or related field, or equivalent knowledge, training, or experience, with at least two years of experience working on the development of materials or components for electronic devices such as batteries.” Pet. 4. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less 7 We refer to the page numbers added by Petitioner to the bottom-center of the page. formal education.” Id. (citing Ex. 1003 ¶ 10). Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’689 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))).” slip op. at 10
- Expert testimonyPetitioner expert discountedDecided for patent owner
“We are not persuaded, on this record, that Petitioner adequately establishes that Khatibi discloses a CTE in the claimed range of 16 to 22 µm/(m·°C.). Petitioner’s argument that Khatibi’s reported values meet this claim limitation are based solely on Dr. Randall’s testimony that Khatibi’s measurement method would produce results that would not significantly differ from results determined using the claimed method. See Pet. 16–18 (citing Ex. 1003 ¶¶ 56–60). Dr. Randall’s testimony, however, is largely conclusory and unsupported by adequate explanation and/or objective evidence. For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added). to little weight. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 12 at 5 (PTAB Feb. 10, 2023) (finding that “the Board was correct in giving little weight to Petitioner’s expert because the expert declaration merely offered conclusory assertions without underlying factual support”); Upjohn Co. v. Mova Pharm. Corp., 225 F.3d 1306, 1311 (Fed. Cir. 2000) (“Lack of factual support for expert opinion to factual determinations, however, may render the testimony of little probative value in a validity determination.” (quoting Ashland Oil, Inc. v. Delta Resins and Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985))); see also In re Ethicon, Inc., 844 F.3d 1344, 1348, 1352 (Fed. Cir. 2017) (concluding that the Board properly gave “little weight” to conclusory expert testimony of objective indicia). Because Petitioner offers Dr. Randall’s testimony to supply a limitation missing from the prior art, namely, the CTE measurement method, and we give Dr. Randall’s unsupported and conclusory testimony little weight, we are not persuaded that Petitioner establishes a reasonable likelihood of showing that Khatibi discloses limitation [1d].” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“second surfaces of the electrolytic copper foil ranges from 3 to 92.” Ex. 1001, 13:62–63. Petitioner contends that “Kim teaches that the electrolytic copper foil (e.g., untreated or treated copper foil) having Rz less than 2 µm is advantageous toward battery efficiency and performance,” and, similarly, Griesi describes the use of untreated electrolytic copper foil with an Rz value less than 2 µm in printed circuit boards that are compatible with secondary batteries. Pet. 58–59 (citing Ex. 1012, claim 2, ¶¶ 13, 25, 27; Ex. 1003 ¶ 157). In particular, Petitioner notes that Griesi’s Figure 3.16 describes an “Rz value of 1.2 µm.” Id. at 59 (citing Ex. 1015, 53–54; Ex. 1003 ¶ 158). Petitioner asserts that “Dr. Randall explains that a POSITA would have also recognized another surface roughness-related parameter, Rpc, in Griesi as a potentially useful parameter that can be optimized to further enhance uniformity or generally improve Kim’s copper foil surface, for example, to prevent wrinkles or achieve other advantageous effects.” Id. (citing Ex. 1003 ¶ 159). Although Dr. Randall demonstrates that Griesi’s Pc (or Rpc) value is 19.2 over a 4 mm sampling length (Ex. 1003 ¶ 155), Petitioner does not contend that Griesi addresses this value, or indicates any benefit that might be derived from its use. Instead, Griesi’s Pc value appears to be an incidental finding, which is not discussed or analyzed in the reference. See incidental, unexamined finding would lead a POSITA to import Griesi’s Pc value into Kim’s copper foil, absent a hindsight desire to reconstruct the claimed invention. As such, Petitioner’s arguments with respect to Kim and Griesi are not persuasive. See Cheese Sys. Inc. v. Tetra Pak Cheese and Powder Sys., Inc., 725 F.3d 1341, 1352 (Fed. Cir. 2013) (“Obviousness cannot be based on the hindsight combination of components selectively culled from the prior art to fit the parameters of the patented invention.” (internal quotations marks omitted)). Thus, we are not persuaded, on this record, that the combined disclosures of Kim and Griesi teach all of the elements of limitation [1g].” slip op. at 23
§ 103 obviousnesscites PhillipsPatents in suitUS 10,811,689 - Solus Advanced Materials Co, Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied
“whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied
“Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9
§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 10,480,090 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 10, 2025 · PGR2024-00049 · APJ Jo-Anne M Kokoski · PGR · Institution
The Board denied institution because Petitioner did not show the patent was eligible for PGR; the challenged claims were supported by the 2006 priority application.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006. 2. Conclusion: PGR Eligibility For the foregoing reasons, and based on the record before us, we determine that Petitioner has not demonstrated that it is more likely than not that the ’202 patent has, or had, at least one claim having an effective filing date on or after March 16, 2013. Accordingly, we determine that the ’202 patent is entitled to the filing date of the ’634 application (October 18, 2006), and, thus, the ’202 patent is not eligible for post-grant review.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“Accordingly, the ’202 patent consistently and repeatedly characterizes the invention as incorporating tobacco in some form and ties the stated benefits of the invention to the inclusion of tobacco. Moreover, the Specification is directed to smoking articles containing tobacco, all of the embodiments include tobacco, and “the present invention” is described as a smoking article, where the smoking article includes tobacco. Consequently, we determine that “smoking article” as it is used in the challenged claims is limited to devices that include tobacco. See Mosaic Brands, Inc. v. Ridge Wallet LLC, 55 F.4th 1354, 1361 (Fed. Cir. 2022) (finding claimed “lip” is limited to “extrudable plastic materials” where specification states that “the device of the present invention is constructed of extrudable plastic materials” and “emphasizes the benefits of using extrudable plastics and describes them as benefits of the invention as a whole”); Poly-Am., L.P. v. described in the specification has inwardly extended short seals and every section of the specification indicates the importance of inwardly extended short seals. These two facts provide together a proper reason to limit the claims in this way.”); Phillips v. AWH Corp., 415 F.3d 1303, 1312–1317 (Fed. Cir. 2005) (en banc) (“[T]he specification may reveal an intentional disclaimer, or disavowal, of claim scope by the inventor. In that instance as well, the inventor has dictated the correct claim scope, and the inventor’s intention, as expressed in the specification, is regarded as dispositive.”).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateNot shown unpatentable
“Petitioner’s argument is dependent on accepting Petitioner’s assertion that the claims include a smoking article that does not contain tobacco, which we have not done. Instead, as set forth above, we construe “smoking article” as being limited to devices that include tobacco. See § II.B.2, supra. Based on our construction of “smoking article” and the evidence of record in this proceeding, we determine that the challenged claims are supported by the specification of the ’202 patent, which is identical to the specification of all of the continuations in the chain leading back to the October 18, 2006 that the specification of the ’202 patent and every patent in its priority chain “have identical specifications”); Prelim. Resp. 13 (noting that Petitioner does not identify other limitations in the challenged claims “allegedly lacking support in the ’202 patent family’s applications dating back to U.S. App. No. 11/550,634, filed on October 18, 2006”). Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006.” slip op. at 17
Claim construction§ 112 disclosurecites PhillipsPatents in suitUS 11,925,202 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00976 · APJ Grace Karaffa Obermann · IPR · Institution
The Board denied institution because BOE did not show a reasonable likelihood of prevailing on claims 1–3 under any of its three obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“We have authority to institute an inter partes review where a petitioner shows a reasonable likelihood of prevailing with respect to at least one challenged claim. 35 U.S.C. § 314(a); 37 C.F.R. § 42.4(a). For reasons that follow, Petitioner does not meet that evidentiary threshold. We decline to reach the issues raised in the Reply or Sur-reply, which relate to Patent Owner’s alternative argument that a discretionary denial of the Petition is warranted.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“education could substitute for professional experience and vice versa.” Pet. 26. Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art” as “set forth in the Petition.” Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s unopposed definition (Pet. 26) because, on this record, it is consistent with the specification. We take note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We construe terms in controversy only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner discusses the terms a “data line having a broad-width portion” and a “scanning line having a broad-width portion” recited in claim 1, as well as a “data line having a broad portion” and a “scanning line having a broad-width portion” recited in claim 2. Petitioner cites the ’079 patent for “offering a lexicographic definition of the term ‘broad width’” to support the plain meaning interpretation of the terms “‘broad-width portion’ and ‘broad portion’ as a portion that is broader than another portion of the subject element.” Pet. 16. Patent Owner does not provide arguments directed specifically to Petitioner’s proposed claim constructions. See Prelim. Resp. 10–11. Taking account of the information presented, we determine that no claim term requires express construction for purposes of deciding whether to institute review. Compare Pet. 16 (addressing issues of claim construction, citing the ’079 patent for supporting the plain and ordinary meaning of “broad-width portion” and “broad portion” without demonstrating that an express construction is necessary to resolve whether to institute review), with Prelim. Resp. 10–11 (addressing the merits of Petitioner’s challenges, without asserting an express claim construction). To the extent that the scope of any claim term requires discussion, however, we provide it in the following analysis of the challenges.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Id. (emphasis added). Sato ¶ 26 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “data lines composed of an Al film.” Id. Importantly, Petitioner does not connect Sato’s disclosure, relating to benefits associated with a data line arrangement, to any particular arrangement of scan lines. Sato ¶ 28 is equally deficient. Sato ¶ 28 also discusses benefits of utilizing a specific “arrangement,” namely, “capacitance lines formed of [a] metal film.” Id. ¶ 28. [0028] With this arrangement, the provision of the function as the shading layer with the capacitance lines formed of the metal film, the polysilicon film, or the like, in addition to the function as the wiring, as well as the provision of the function as the light absorption layer with the capacitance electrodes formed of the polysilicon film, or the like, in addition to the function as electrodes, prevents the laminated structure from becoming complex by additionally forming a dedicated shading layer and a dedicated light absorption layer. Accordingly, this arrangement is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof. Id. (emphasis added). Here again, Sato ¶ 28 is entirely silent on scan lines and clearly links the cited benefits to “this arrangement” of “capacitance lines formed of metal film.” Id. Petitioner does not bridge the gap in its rationale to combine by attempting to explain why an ordinarily skilled artisan would have extrapolated benefits, pertaining to an arrangement of capacitance lines, to a similar arrangement of scan lines. Petitioner’s witness, Dr. Flasck, provides no further insight as to how or why Sato ¶¶ 26 and 28 would have been understood to apply to scan lines. Dr. Flasck’s comments on Sato ¶¶ 26 and 28 merely repeat, nearly verbatim, the Petition’s conclusory contentions. See Ex. 1002 ¶ 139 (Dr. Flasck declaring “Sato specifically teaches that its device ‘is very advantageous by simply arranging the electro-optical device, and simplifies a manufacturing process thereof.’”); Pet. 37. Dr. Flasck does not cite to any additional supporting evidence other than Sato ¶¶ 26 and 28. Ex. 1002 ¶ 139.” slip op. at 15
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 7,502,079 - Boe Technology Group Co., Ltd. v. 138 East LCD Advancements LimitedInstitution deniedPTAB · Dec 16, 2024 · IPR2024-00977 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 7–13 and 15–20 unpatentable on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had at least a Bachelor’s degree in electrical engineering, computer science, physics, or a similar field and at least two years of experience designing semiconductor display devices, including LCD displays.” Pet. 19. Petitioner also asserts that “[a]dditional relevant work experience can compensate for less education, and vice versa.” Id. On the record presented, Patent Owner “does not dispute the level of skill for a person of ordinary skill in the art . . . set forth in the Petition.” Prelim. Resp. 8. Neither party explains why the outcome of this case would be affected by the adoption of any particular proffered definition of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’606 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As discussed below, we are able to determine whether to institute review without resolving the construction of any claim terms. Accordingly, we need not and do not construe any terms expressly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“view. First, as Petitioner admits, data line 6a is not connected to image signal line 101d and line 109 other than when sample hold circuit 101c connects them due to shift register 101b outputting an enabling signal. Pet. 49. This is supported by the layout of the four elements in Fujikawa’s Figure 2. Ex. 1005, Fig. 2 (depicting sample hold circuits 101c between and connecting data lines 6a and signal lines 101d). In addition, Patent Owner’s declarant, Dr. E. Fred Schubert, testifies that “two separate lines straddling circuitry are [not] one line.” Ex. 2001 ¶ 64. The dispute between the parties on this issue is largely one of claim construction: should the term “wiring line” in claim 7 be construed broadly enough to encompass a collection of lines separated by a sample hold circuit? In order to determine that Fujikawa discloses or teaches the recited wiring lines, we would need to answer this question in the affirmative. Yet, as discussed above, neither party proposes construing “wiring line,” or any other term used in the claims of the ’606 patent. Pet. 18; Prelim. Resp. 7. The failure to argue for and sufficiently support a broad construction of the term “wiring line” means that Petitioner does not show sufficiently, for purposes of supporting institution of review, that Fujikawa discloses or teaches the “wiring line” limitation of claim 7. b) Conclusion Regarding Claim 7 Based on the record presented, we determine that Petitioner has not shown that there is a reasonable likelihood that Petitioner will prevail in demonstrating that claim 7 is unpatentable as anticipated by or obvious in view of Fujikawa.” slip op. at 11
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,557,606 - Innoscience America, Inc. v. Infineon Technologies Austria AGInstitution deniedPTAB · Dec 11, 2024 · IPR2024-00975 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because the petition did not show a reasonable likelihood that any challenged claim was obvious over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 1. Petitioner also asserts that “[a]dditional education could substitute for professional experience and vice versa.” Id. On the present record, Patent Owner does not dispute this proposed level of skill. Prelim. Resp. 1–78. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’481 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“On the present record, neither party proposes any claim terms for construction. Pet. 3; Prelim. Resp. 1–78. As discussed below, we are able to determine whether to institute review without resolving the construction of any claim terms. Accordingly, we need not and do not construe any terms expressly. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“‘run[ning] generally parallel to the lateral extent of a semiconductor material or semiconductor carrier’” and that “[t]he ’481 patent . . . describes a device that ‘has a lateral drift path.’” Pet. 24 (quoting Ex. 1001, 3:14–18, 4:37–38). Patent Owner directs us to a statement in the prosecution history that “[a] lateral transistor is a transistor in which current flows across ‘in the direction parallel to’ the device surface,” as opposed to “a vertical transistor,” in which “[c]urrent ‘flows in the direction normal to’ the device surface.” Prelim. Resp. 8 (quoting Ex. 1002, 33–34). Thus, the parties generally agree that a lateral transistor is a transistor in which current flows in a direction parallel to the surface of the transistor. Petitioner argues that Nega teaches or suggests a transistor in which current flows parallel to the surface because Nega’s source, gate, and drain electrodes “are spread laterally in a lateral drift path, instead of vertically stacked.” Pet. 24–25 (citing Ex. 1005, Fig. 2). Patent Owner argues to the contrary that the placement of source, gate, and drain electrodes in the same lateral plane, rather than in a vertical stack, does not necessarily indicate that the current flow within the transistor is parallel to the surface. Prelim. Resp. 47–48 (citing Ex. 2002, 7–8, Figs. 1.7a, 1.7c). According to Patent Owner, transistors with electrodes in the same horizontal plane can have either lateral or vertical current flow. Id. Thus, Patent Owner argues, the lateral placement of the source, gate, and drain electrodes in Nega does not mean that Nega teaches or suggests a lateral transistor. On the present record, we agree with Patent Owner that Petitioner has not shown sufficiently that Nega teaches a transistor in which current flows in a direction parallel to the surface, rather than in a direction normal to the surface. Transistors with current flow in either direction can have electrodes located on a common horizontal plane, with the direction of the current flow depending on the configuration of doped semiconductor regions located below the electrodes. Ex. 2002, Figs. 1.7a, 1.7c. Because Petitioner relies on the location of Nega’s electrodes, rather than on any particular configuration of doped semiconductor regions in Nega, Petitioner does not show sufficiently that Nega teaches a lateral transistor.” slip op. at 10
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,899,481
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.