- Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Institution deniedPTAB · Oct 8, 2025 · IPR2025-00701 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–14 were obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’138 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 1–14 of the ’138 patent.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner states that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 6. Patent Owner does not address claim construction. See generally Prelim. Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Skill levelSkill level petitioner adoptedOther
“a Ph.D. or master’s degree in electrical engineering, physics, materials science, or a related field, and at least one year or four years, respectively, of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent. Pet. 8 (citing Ex. 1024 ¶¶ 25–29). Petitioner contends that less work experience can be compensated for by a higher level of experience and vice versa. Id. (citing Ex. 1024 ¶ 25). Petitioner also asserts that the proposed level of skill would be the same under any of the United States, Japanese, or PCT application dates. Id. at 8–9 (citing Ex. 1024 ¶¶ 24–25). Patent Owner does not challenge Petitioner’s proposed level of qualifications for one of ordinary skill in the art. Prelim. Resp. 20. At this stage of the proceeding, we adopt Petitioner’s assessment of the level of skill in the art, which is consistent with the ’138 patent and the asserted prior art of record.” slip op. at 7
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“As discussed above, Petitioner relies upon Parkin, and its layers 115 and 175, as the claimed first and second ferromagnetic material layers, respectively. See Pet. 10, 16. Petitioner admits that these layers are 8 In the Petition, Petitioner refers to the lower electrode “ferromagnetic layer 110’ as discussed in Claim 1[a]” in the discussion of limitation 1[d]. Pet. 18. Petitioner’s reference to “layer 110’” appears to be in error because the Petition’s discussion for limitation 1[a] refers to layer 115 of Parkin, as does Dr. Bokor’s testimony related to limitations 1[a] and 1[d]. Pet. 10; Ex. 1024 ¶¶ 109, 136. amorphous, but contends that, as Parkin discloses, these layers may be annealed. Id. at 17. Petitioner, however, refers to Parkin’s disclosure that only “a portion of the storage layer 175” is crystallized after annealing. Id. at 17–18 (citing Ex. 1062, 18:51–55) (emphasis added). Petitioner also relies upon Parkin’s “thin crystalline ferromagnetic layer” that is crystallized to teach limitation 1[d]. Id. at 18 (citing Ex. 1062, 18:55–59; Ex. 1024 ¶¶ 131–132) (emphasis added). Dr. Bokor additionally testifies that it is “Parkin’s ‘thin crystalline ferromagnetic layer’ of CoFeB” that meets the “entirely crystallized” requirement of limitation 1[d]. Ex. 1024 ¶ 132. Parkin, however, states that a thin crystalline ferromagnetic layer is formed, but “the bulk of storage layer 175 remains amorphous.” Ex. 1062, 18:55–60 (emphasis added). Petitioner fails to reconcile how its assertions that the first and second ferromagnetic layers, which are mapped to the totality of layers of 115 and 175, meet the limitation that the first and second ferromagnetic layers are each “entirely crystallized” when Petitioner relies only a thin layer, that is, a portion, of the 115 and 175 layers for the teaching that the respective layers are entirely crystallized. Put another way, Petitioner’s mapping is inconsistent: Petitioner relies upon the full depth of certain “layers” of Parkin for the teaching of the ferromagnetic layers, but then only relies upon thin portion of that depth for the assertion that the “layers” are entirely crystallized.” slip op. at 16
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,367,138 - Sterlite Technologies Inc. v. Afl Telecommunications, LLC.Institution deniedPTAB · Apr 9, 2025 · IPR2025-00127 · APJ Josiah C Cocks · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–4, 8, or 13 were unpatentable over either proposed obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 10
- Skill levelOther
“B. Level of Ordinary Skill in the Art As noted above, resolving the question of obviousness requires determination of the level of ordinary skill in the art. Graham, 383 U.S. at 17–18. Here, however, as Patent Owner observes (Prelim. Resp. 10), 8 Patent Owner does not present arguments or evidence of secondary considerations in its Preliminary Response. Therefore, secondary considerations do not constitute part of our analysis herein. Petitioner has provided no assessment as to the level of ordinary skill to be considered in evaluating the grounds of obviousness that are advanced by Petitioner. The absence of such assessment calls into question the fundamental adequacy of Petitioner in carrying its burden to show a reasonable likelihood of success of unpatentability of the challenged claims that necessarily must take into account the level of ordinary skill in the art.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In any event, we do not discern that there is any apparent dispute between the parties as to the meaning of any claim term. In considering the record at hand, we determine that it is unnecessary to make explicit, or further address, any claim term in deciding whether or not to institute trial. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the 9 Throughout their briefings, the parties refer to the limitations designated [1.1] through [1.7] using the term “element,” e.g., “element [1.7]” (see, e.g., Pet. 23; Prelim. Resp. 23). For consistency with the parties’ chosen nomenclature, we do the same in this Decision. controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“A POSITA would have been motivated to modify Summers’ fiber optic cable 50 to include Kaji’s intermittently-fixed optical fiber tape 2A to obtain the predictable result of enabling a higher density of optical fibers to be packed in Summers’ fiber optic cable 50, as contemplated by Kaji. *** a POSITA would have had a reasonable expectation of success because such modification would amount to nothing more than a simple substitution of Summers’ four-fiber ribbons 52 with Kaji’s intermittently-fixed optical fiber tape 2A by known methods of cable manufacturing. ***” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,287,591 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Institution deniedPTAB · Mar 14, 2025 · IPR2024-01449 · APJ Justin T Arbes · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1 and 2 were unpatentable under any of the four asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“inter partes review unless the information in the petition and preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” See 37 C.F.R. § 42.4(a) (“The Board institutes the trial on behalf of the Director.”). For the reasons that follow, we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” where “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Pet. 29 (citing Ex. 1024 ¶ 25). Patent Owner applies Petitioner’s definition of the level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 17. Based on the record presented, including our review of the ’463 patent and the types of problems and solutions described in the ’463 patent and cited prior art, we agree with Petitioner’s proposed definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“C. Claim Interpretation We interpret each challenged claim using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b), including construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent. 37 C.F.R. § 42.100(b). Petitioner argues that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary.” Pet. 25–26. Patent Owner does not propose interpretations of any claim terms in its Preliminary Response. We conclude that no express interpretation of any claim term is necessary to determine whether to institute an inter partes review in this proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (citation omitted) (emphasis added)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Further, because Bowen’s disclosed barrier height is outside the claimed range, Petitioner relies on Soukup’s purported teaching of a barrier height of “about 0.33 eV” and contends that a person of ordinary skill in the art would have been motivated to “achieve” that barrier height for the MgO barrier of Bowen’s device. Id. at 34–36. The data that Petitioner relies on from Soukup for the “about 0.33 eV” barrier height, though, was determined using the slope of an Arrhenius plot, not Simmons’ formula. Ex. 1028, 3229 (Abstract), 3231–33, Table I. In Soukup, apparent barrier heights for the samples were determined using (1) the slope of an Arrhenius plot, and (2) the zero-field intercept of the straight line logI versus V1/2 plot. Id. at 3229 (Abstract), 3230–32, Fig. 3, Table I. Reproduced below is Table I of Soukup, as annotated by Patent Owner (Prelim. Resp. 39): Annotated Table I of Soukup includes the results of analyses of sample test data, with the column highlighted in yellow showing the barrier heights obtained by a zero-field intercept method and the column highlighted in blue showing barrier heights obtained from the slope of an Arrhenius plot. See Ex. 1028, 3233; Prelim. Resp. 38–39. Dr. Bokor testifies that “Soukup disclosed that Simmons’ formula was used to approximate tunnel barrier height” and “[o]ne of skill would have understood the ‘height and the bias dependence of the insulator potential-energy barrier’ [referenced in Soukup] included the tunnel barrier height.” Ex. 1024 ¶¶ 145–147 (quoting Ex. 1028, 3229; citing Ex. 1024 ¶¶ 45–49). We do not find this testimony persuasive. Although Soukup refers to “Simmons’ model” and the Simmons 1963 paper in its “Introduction,” it does not teach any calculation using Simmons’ formula to obtain a barrier height within the claimed range. See Ex. 1028, 3229, 3236 n.1; Prelim. Resp. 63. Soukup plainly recognizes that there are methods of calculating barrier height other than Simmons’ formula, and discusses at length its calculations using two such methods: the Arrhenius plot method and the zero-field intercept method. See, e.g., Ex. 1028, 3229 (Abstract) (“These results . . . indicate a potential barrier height of about 0.72 eV when determined from the zero-field intercept of the straight line logI vs V1/2 plot and about 0.33 eV when obtained from an Arrhenius plot.”), 3232–33. Petitioner does not address whether the 0.33 eV barrier height it relies on from Soukup (determined using the Arrhenius plot method) would still be within the claimed range if calculated using Simmons’ formula. See Prelim. Resp. 63. Nor does Petitioner rely on any values from Soukup’s disclosure that would be used as the variables in Simmons’ formula—Petitioner relies solely on Bowen. See Pet. 39–42. Thus, Petitioner’s argument that Bowen and Soukup teach a barrier height within the claimed range, obtained using equation (1), is not persuasive. See id. at 34–42.” slip op. at 17
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,123,463 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Institution deniedPTAB · Mar 13, 2025 · IPR2024-01384 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable over the asserted obviousness combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’403 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 1–8 of the ’403 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a “Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Pet. 29 (citing Ex. 1024 ¶ 25). Patent Owner “does not challenge Petitioner’s POSA [person of ordinary skill in the art] definition.” Prelim. Resp. 17. In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we adopt the assessment offered by Petitioner, as it is consistent with the ’403 patent and the asserted prior art.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner “submits the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 26. Patent Owner does not address claim construction in its Preliminary Response. See generally Prelim. Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Importantly, Soukup indicates a different relationship between the amount of oxygen vacancy defects in the barrier layer and the barrier height, depending on which method is used. Specifically, Soukup explicitly found that “[t]he apparent barrier height determined from the zero-field intercept went up for increasing oxygen pressure [(i.e., less oxygen vacancy defects)] and the barrier height determined from the Arrhenius plot went down.” Ex. 1028, 3229 (Abstract) (emphasis added).15 That disclosure is reflected in Table I, where Soukup shows the results for three fabricated samples with increasing oxygen pressure during MgO deposition. Id. at 3233. Patent Owner provides another annotated version of Table I below (Prelim. Resp. 45): 15 Soukup’s conclusion appears to refer to the trend of the respective increasing or decreasing barrier heights values under the two different mathematical analyses methods. Annotated Table I above shows (in red) that the barrier height decreases as oxygen vacancies increase (i.e., as the oxygen pressure admitted during MgO deposition, shown in the PO2 column, decreases) using the zero-field intercept method, and shows (in blue) that the barrier height increases as oxygen vacancies increase (i.e., as the oxygen pressure admitted during MgO deposition decreases) using the Arrhenius plot method. Prelim. Resp. 45. In other words, Petitioner’s alleged inverse relationship is present for the zero-field intercept method, but not for the Arrhenius plot method. See id.; Pet. 37–38. “The barrier height cannot both increase and decrease with more oxygen vacancy defects,” and Petitioner does not attempt to reconcile or explain Soukup’s disparate teachings. See Prelim. Resp. 45 (emphasis omitted). We agree with Patent Owner that Petitioner is inconsistent in relying on one method as allegedly teaching a barrier height within the claimed range, while at the same time relying on the other method for a motivation under its obviousness theory. Prelim. Resp. 45–49. If a person of ordinary skill in the art would have understood that the Arrhenius plot method was the appropriate method for determining barrier height, as Petitioner argues in asserting that Soukup teaches a barrier height of 0.33 eV, that person would have understood that “the barrier height increases as oxygen vacancies increase” (in blue above), and Petitioner’s obviousness theory of adding oxygen vacancies to lower Bowen’s barrier height is incorrect. See id. at 47. If, however, a person of ordinary skill in the art would have looked to the zero-field intercept method, that person “would have understood that all of Soukup’s tested samples . . . had barrier heights” (in yellow above) “above the claimed range of 0.2–0.5 eV.” See id. at 48. Petitioner cannot have it both ways. Based on the record before us, Petitioner has not shown sufficiently” slip op. at 23
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,884,403 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Institution deniedPTAB · Mar 13, 2025 · IPR2024-01385 · APJ Sheila F Mcshane · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–4 would have been obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to the unpatentability of at least one claim of the ’263 patent. Accordingly, for the reasons that follow, we decline to institute an inter partes review of claims 1–4 of the ’263 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“person of ordinary skill in the art at the time of the ’263 patent would have had a “Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Pet. 29 (citing Ex. 1024 ¶ 25).” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- BurdenNot shown unpatentable
“As discussed above, Petitioner fails to explain why one of ordinary skill in the art would have selected the barrier height value it relies upon. And given the disparity of Soukup’s barrier tunnel values under the different methods of analyses, the reference is, at best, ambiguous as to which values are accurately representative of barrier height. Additionally, the evidence supports that the apparent barrier height value that Petitioner relies upon (“about 0.33 eV”) will be a different higher value, so the actual value of the barrier height is uncertain. Accordingly, we do not find that Petitioner has met its burden to sufficiently demonstrate that a person of ordinary skill in the art would have understood Soukup to teach or suggest the claimed range of limitation 1[e] in that there is insufficient evidence presented that supports that the selected Soukup barrier height value represents an accurate value.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,319,263 - Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Institution deniedPTAB · Mar 13, 2025 · IPR2024-01386 · APJ Monica S Ullagaddi · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–6 were unpatentable on any asserted obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2024). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Having considered the parties’ arguments and the evidence of record, we determine that, for the reasons discussed herein, Petitioner does not demonstrate a reasonable likelihood that it would prevail with respect to at least one of the challenged claims. We thus decline to institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Pet. 28–29 (citing Ex. 1024 ¶ 25). Petitioner further states that “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa” and that “[t]his level of ordinary skill would be the same if the relevant time period were around the March 12, 2004 or October 28, 2004 Japanese priority applications, or the March 10, 2005 PCT filing date.” Id. at 29 (citing Ex. 1024 ¶¶ 24–25). Patent Owner states that “[f]or purposes of this Preliminary Patent Owner Response only, Patent Owner does not challenge Petitioner’s POSA [person of ordinary skill in the art] definition because the Petition fails even if Petitioner’s POSA definition is adopted.” Prelim. Resp. 20 (citing Pet. 28–29). To resolve the institution question, we adopt Petitioner’s proposal regarding the level of one of ordinary skill in the art. The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“claims using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as articulated in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc), and its progeny. See 37 C.F.R. § 42.100(b). Petitioner states that “the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 25. Patent Owner does not directly” slip op. at 7
- BurdenNot shown unpatentable
“Thus, the cited teachings of Sunai support Patent Owner’s position that, even if adding boron into a ferromagnetic layer of CoFe results in a higher TMR as taught by Sunai, the addition suppresses crystallization. As to the issue of the teaching of the BCC structure of the alloy, not only does Petitioner’s challenge applying Bowen and Sunai fail to demonstrate a teaching or even a suggestion of a CoFeB alloy with a BCC cited by Petitioner does not either. Only one of Petitioner’s cited pieces of underlying evidence refers to a BCC lattice structure, Parkin, but Parkin’s BCC structure is disclosed with respect to a CoFe layer, and not a CoFeB layer. Ex. 1062, 18:55–59 (“The simple cubic crystalline MgO layer thus provides a template for the formation of a thin crystalline ferromagnetic layer which has the bcc structure of CoFe and is oriented in the same (100) direction as the MgO layer.” (emphasis added)).” slip op. at 12
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,608,198 - Ecto World, LLC / Sv3, LLC v. Rai Strategic Holdings, Inc.Institution deniedPTAB · Mar 10, 2025 · PGR2024-00049 · APJ Jo-Anne M Kokoski · PGR · Institution
The Board denied institution because Petitioner did not show the patent was eligible for PGR; the challenged claims were supported by the 2006 priority application.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006. 2. Conclusion: PGR Eligibility For the foregoing reasons, and based on the record before us, we determine that Petitioner has not demonstrated that it is more likely than not that the ’202 patent has, or had, at least one claim having an effective filing date on or after March 16, 2013. Accordingly, we determine that the ’202 patent is entitled to the filing date of the ’634 application (October 18, 2006), and, thus, the ’202 patent is not eligible for post-grant review.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner
“Accordingly, the ’202 patent consistently and repeatedly characterizes the invention as incorporating tobacco in some form and ties the stated benefits of the invention to the inclusion of tobacco. Moreover, the Specification is directed to smoking articles containing tobacco, all of the embodiments include tobacco, and “the present invention” is described as a smoking article, where the smoking article includes tobacco. Consequently, we determine that “smoking article” as it is used in the challenged claims is limited to devices that include tobacco. See Mosaic Brands, Inc. v. Ridge Wallet LLC, 55 F.4th 1354, 1361 (Fed. Cir. 2022) (finding claimed “lip” is limited to “extrudable plastic materials” where specification states that “the device of the present invention is constructed of extrudable plastic materials” and “emphasizes the benefits of using extrudable plastics and describes them as benefits of the invention as a whole”); Poly-Am., L.P. v. described in the specification has inwardly extended short seals and every section of the specification indicates the importance of inwardly extended short seals. These two facts provide together a proper reason to limit the claims in this way.”); Phillips v. AWH Corp., 415 F.3d 1303, 1312–1317 (Fed. Cir. 2005) (en banc) (“[T]he specification may reveal an intentional disclaimer, or disavowal, of claim scope by the inventor. In that instance as well, the inventor has dictated the correct claim scope, and the inventor’s intention, as expressed in the specification, is regarded as dispositive.”).” slip op. at 13
- Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateNot shown unpatentable
“Petitioner’s argument is dependent on accepting Petitioner’s assertion that the claims include a smoking article that does not contain tobacco, which we have not done. Instead, as set forth above, we construe “smoking article” as being limited to devices that include tobacco. See § II.B.2, supra. Based on our construction of “smoking article” and the evidence of record in this proceeding, we determine that the challenged claims are supported by the specification of the ’202 patent, which is identical to the specification of all of the continuations in the chain leading back to the October 18, 2006 that the specification of the ’202 patent and every patent in its priority chain “have identical specifications”); Prelim. Resp. 13 (noting that Petitioner does not identify other limitations in the challenged claims “allegedly lacking support in the ’202 patent family’s applications dating back to U.S. App. No. 11/550,634, filed on October 18, 2006”). Accordingly, we determine that Petitioner does not demonstrate that it is more likely than not that the challenged claims lack written support in the Specification (and the ’634 application). That is, on this record, it appears that the challenged claims properly claim priority to the ’634 application and, accordingly, have an effective filing date in October 2006.” slip op. at 17
Claim construction§ 112 disclosurecites PhillipsPatents in suitUS 11,925,202 - Motorola Mobility LLC v. Largan Precision Co., Ltd.Institution deniedPTAB · Jan 3, 2025 · IPR2024-00689 · APJ Norman H Beamer · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–34 were obvious over Fukaya or Cai.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“3. Analysis Petitioner has not shown a reasonable likelihood that a person of ordinary skill, as of the August 2014 priority date of the ’845 patent, would have been motivated to modify the Fukaya seven-lens system to change the bi-convex/bi-concave design of the sixth and seventh lenses to a double gullwing/meniscus design. Redesigning a lens system is extraordinarily complicated, requiring protracted trial-and-error experimentation with nearly an infinite number of possible solutions in a highly multidimensional space. Ex. 1010, 11; Ex. 1011, 169. We conclude that Petitioner and its expert navigate along one path out of many to the particular redesign they propose using improper result-oriented hindsight as a guide.” slip op. at 23
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“paragraph) (“Becton Dickinson”). The Becton Dickinson factors apply when a petition relies on art or arguments previously presented to the Office during any proceeding pertaining to the challenged patent, including reexamination, reissue, and AIA post-grant proceedings. Advanced Bionics, LLC v. MED-EL Elektromedizinische Geräte GmbH, IPR2019- 01469, Paper 6, 8–10 (PTAB Feb. 13, 2020) (precedential). Advanced Bionics explains how the Becton Dickinson factors fit into a two-part framework that examines: (1) whether the same or substantially the same art previously was presented to the Office or whether the same or substantially the same arguments previously were presented to the Office; and (2) if either condition of first part of the framework is satisfied, whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of challenged claims. If a condition in the first part of the framework is satisfied and the petitioner fails to make a showing of material error, the Director generally will exercise discretion not to institute inter partes review. Id. at 8–9. Here, as discussed above, the same art that Petitioner relies on — Fukaya and Tsai/Cai — was previously presented to the Office. Thus, Patent Owner has shown that the first part of the Advanced Bionics framework is satisfied. Turning to the second part of the Advanced Bionics framework, we determine that Petitioner has demonstrated that the Office erred in a manner material to the patentability of the challenged claims.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“3. Analysis Petitioner has not shown a reasonable likelihood that a person of ordinary skill, as of the August 2014 priority date of the ’845 patent, would have been motivated to modify the Fukaya seven-lens system to change the bi-convex/bi-concave design of the sixth and seventh lenses to a double gullwing/meniscus design. Redesigning a lens system is extraordinarily complicated, requiring protracted trial-and-error experimentation with nearly an infinite number of possible solutions in a highly multidimensional space. Ex. 1010, 11; Ex. 1011, 169. We conclude that Petitioner and its expert navigate along one path out of many to the particular redesign they propose using improper result-oriented hindsight as a guide. Petitioner’s expert’s recitation of the at least 25 steps taken to journey from the original Fukaya design to the modified design is instructive: (i) inputting into lens design software the original Fukaya lens parameters; (ii) evaluating its off-axis performance; (iii) increasing the number of analysis field points; (iv) deciding to focus on lenses 5–7, which requires that all aspherics be varied; (v) modifying lens 6 aspherics; (vi) adding CARD operands in the merit function to change the curvature radius values on the lens surfaces; (vii) adding FTGT operands to control spacing between the lenses and lens thicknesses; (viii) adjusting CENY to set the field height; (ix) using a 20x20 rectangular grid of rays for the spot rms part of the merit function; (x) making all aspherics and conics variable, except on the objectside surface of the seventh lens; (xi) increasing the f-number to 2; (xii) increasing sampling to 40x40; (xiii) targeting a positive curvature on the image-side surface of lens 6 with the CVGT 0 operand; (xiv) increasing FTGT to 0.2 on lens 7; (xv) increasing the focal length of lens 6 to 3mm; (xvi) targeting a positive curvature on the object side of lens 7 with the CVGT 0 operand; (xvii) reducing the power of lens 7; (xviii) increasing the target focal length on lens 6; (xix) releasing the focal length constraint on lens 7; (xx) releasing the focal length constraints on lenses 5 and 6; (xxi) reducing f-number in steps to 1.65; (xxii) adding DIMX operands; (xxiii) freezing the conics on surfaces 10 and 14; (xxiv) adding FCGT and FCGS commands to limit field curvature; (xxv) adding LONAs into the merit function — thus “resulting” in the Fukaya lens system with a meniscus-gullwing lens pair for lenses 6 and 7.5 Ex. 1001 ¶¶ 82–85. We are not persuaded that this exercise is sufficiently free of hindsight motivation. For purposes of this Decision, we accept that gullwing/meniscus designs were well-known as of the priority date.6 However, the fact that such designs were available and could have been used does not mean that they would have been used. Belden Inc. v. Berk–Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). We agree with Patent Owner that there is no evidence that that Fukaya was in need of any improvements to its compactness, aberrations, or chief ray angle. Prelim. Resp. 27. As Patent Owner establishes, the original Fukaya track length is actually shorter than the track length of the redesigned lens systems proposed by Petitioner, aberrations are properly corrected in the unmodified Fukaya lens system, and Petitioner’s redesign provides only minimally improved off-axis relative illumination. Id. at 27–33.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightDecided for patent owner
“ordinary skill, as of the August 2014 priority date of the ’845 patent, would have been motivated to modify the Fukaya seven-lens system to change the bi-convex/bi-concave design of the sixth and seventh lenses to a double gullwing/meniscus design. Redesigning a lens system is extraordinarily complicated, requiring protracted trial-and-error experimentation with nearly an infinite number of possible solutions in a highly multidimensional space. Ex. 1010, 11; Ex. 1011, 169. We conclude that Petitioner and its expert navigate along one path out of many to the particular redesign they propose using improper result-oriented hindsight as a guide. Petitioner’s expert’s recitation of the at least 25 steps taken to journey from the original Fukaya design to the modified design is instructive: (i) inputting into lens design software the original Fukaya lens parameters; (ii) evaluating its off-axis performance; (iii) increasing the number of analysis field points; (iv) deciding to focus on lenses 5–7, which requires that all aspherics be varied; (v) modifying lens 6 aspherics; (vi) adding CARD operands in the merit function to change the curvature radius values on the lens surfaces; (vii) adding FTGT operands to control spacing between the lenses and lens thicknesses; (viii) adjusting CENY to set the field height; (ix) using a 20x20 rectangular grid of rays for the spot rms part of the merit function; (x) making all aspherics and conics variable, except on the objectside surface of the seventh lens; (xi) increasing the f-number to 2; (xii) increasing sampling to 40x40; (xiii) targeting a positive curvature on the image-side surface of lens 6 with the CVGT 0 operand; (xiv) increasing FTGT to 0.2 on lens 7; (xv) increasing the focal length of lens 6 to 3mm; (xvi) targeting a positive curvature on the object side of lens 7 with the CVGT 0 operand; (xvii) reducing the power of lens 7; (xviii) increasing the target focal length on lens 6; (xix) releasing the focal length constraint on lens 7; (xx) releasing the focal length constraints on lenses 5 and 6; (xxi) reducing f-number in steps to 1.65; (xxii) adding DIMX operands; (xxiii) freezing the conics on surfaces 10 and 14; (xxiv) adding FCGT and FCGS commands to limit field curvature; (xxv) adding LONAs into the merit function — thus “resulting” in the Fukaya lens system with a meniscus-gullwing lens pair for lenses 6 and 7.5 Ex. 1001 ¶¶ 82–85. We are not persuaded that this exercise is sufficiently free of hindsight motivation. For purposes of this Decision, we accept that gullwing/meniscus designs were well-known as of the priority date.6 However, the fact that such designs were available and could have been used does not mean that they would have been used. Belden Inc. v. Berk–Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). We agree with Patent Owner that there is no evidence that that Fukaya was in need of any improvements to its compactness, aberrations, or chief ray angle. Prelim. Resp. 27. As Patent Owner establishes, the original Fukaya track length is actually shorter than the track length of the redesigned lens systems proposed by Petitioner, aberrations are properly corrected in the unmodified Fukaya lens system, and Petitioner’s redesign provides only minimally improved off-axis relative illumination. Id. at 27–33.” slip op. at 23
Claim construction§ 103 obviousnessDiscretionary denialcites GrahamPatents in suitUS 9,366,845 - Cisco Systems, Inc. v. Video Solutions Pte. Ltd.Institution deniedPTAB · Nov 12, 2024 · IPR2024-00922 · APJ Barbara A Parvis · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were obvious over Larson and Cai.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For the reasons given, we determine Petitioner has not has not shown that the asserted prior art teaches or suggests limitation [1.7]. Accordingly, we conclude that Petitioner has not demonstrated a reasonable likelihood that it would prevail in showing that claim 1 is unpatentable under 35 U.S.C. § 103(a) as obvious over Larson and Cai. a) Conclusion—Claim 1 For the foregoing reasons, we determine that Petitioner has not demonstrated a reasonable likelihood that it would prevail in showing that claim 1 is unpatentable under 35 U.S.C. § 103(a) as obvious.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“comprise the background knowledge art, with very little substantive explanation. In our view, this string-citation, without more substantive explanation, does not satisfy Petitioner’s obligation to explain why a person of ordinary skill in the art would have modified Larson based on the background knowledge in the art to account for limitation 1.7.” slip op. at 14
- Skill levelSkill level petitioner adoptedOther
“For purposes of this proceeding, Patent Owner “agrees to use Petitioner’s definition” for a person of ordinary skill in the art. Prelim. Resp. 12. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’823 patent specification and the prior art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner states “each claim term in the Challenged Claims” should “be given its plain and ordinary meaning,” and “that no specific construction of any claim term is required.” Pet. 17–18. Patent Owner “agrees with Petitioner that, for this proceeding and the grounds presented by Petitioner, no claim term requires construction.” Prelim. Resp. 12. For purposes of this Decision, no claim terms require express construction.” slip op. at 8
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 8,446,823 - Motorola Mobility LLC v. Largan Precision Co., Ltd.Institution deniedPTAB · Oct 28, 2024 · IPR2024-00688 · APJ Jon M Jurgovan · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–22 would have been obvious over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“We determine, on the record before us, that Petitioner does not have a likelihood of success of showing that the “prolonged” etching process that Petitioner proposes to arrive at the structure of limitation 1.6 to be “unusually simple” nor is “the technology particularly straightforward.” CN182’s etching process uses an alkali (sodium bicarbonate) solution with a concentration from 5% to 35% at a temperature of 35 to 55°C stirred for a period of 3 to 5 hours in an ultrasonic generator with power of 300 to 500 watts. Ex. 1004 ¶¶ 7–12. This is done in CN182 to create a matte structure on the inner surface of the body composed of plastic material (polyethylene terephthalate (PET)) between two antistatic coatings comprised of carbon powder layers. See, e.g., Ex. 1004 ¶¶ 5–6. Petitioner does not indicate how much time beyond CN182’s stated range of 3 to 5 hours would be required for the “prolonged” etching process it proposes to achieve a minimum depth of 2.0 μm relative to the outer carbon powder layer, nor whether a POSITA would have considered the prolonged time to be practically viable. Petitioner also does not explain what the reaction is, what its etch rate is, whether its effect would be diminished or exhausted as reactants are consumed or affected by other substances present, or whether other variables, such as the alkali concentration, temperature, or power and frequency of the ultrasonic generator, would need to be changed and how much over the course of the “prolonged” etching process.” slip op. at 30
- Skill levelSkill level petitioner adoptedOther
“Petitioner states as follows: The person of ordinary skill in the art in November 2016 (“POSITA” or “POSA”) would have held a bachelor’s degree in physics, optical sciences, or a closely related field, and approximately three years’ experience in optical system design, including stray light suppression. More education would compensate for less work experience and vice versa. POSITAs understood the fundamentals of stray light suppression. Pet. 35–36 (citing Ex. 1008, 587:18–20, 167, 595:32–33, xiii:24–26; Ex. 1003 ¶¶ 31–37). Petitioner further asserts that various texts in the record reflect the knowledge of a POSITA. Id. at 36 (citing Exs. 1007–1010). Petitioner alleges that a POSITA could be part of a team that includes a lens designer and a stray light specialist. Id. (citing Ex. 1007, 120; Ex. 1003 ¶¶ 33, 36, 38–41). Patent Owner states that Patent Owner “does not dispute Motorola’s articulation of the level of skill in the art in November 2016.” Prelim. Resp. 12–13 (citing Pet. 35–36). For this Decision, we adopt Petitioner’s undisputed proposal for the level of ordinary skill in the art as consistent with the evidence of record, including the ’660 patent and the prior art references on which Petitioner relies. Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (the applied prior art may reflect an appropriate level of skill).” slip op. at 9
- Expert testimonyPetitioner expert discountedOther
“Patent Owner correctly argues that the evidence does not show that Petitioner’s declarant, Dr. Milster, has expertise in etching of plastic materials such as PET which CN182 discloses for use as the inner substrate layer. Prelim. Resp. 15 (citing Ex. 1003 ¶¶ 31–37). Dr. Milster states that he has “education, knowledge, skills, and experience in the fields of optics and lens design.” Ex. 1003 ¶ 29. This statement does not provide any evidence of expertise in etching plastic materials. Nor does he indicate that he has any expertise in this field in his curriculum vitae. Ex. 1003, Appendix A. Consequently, on this record, Dr. Milster’s testimony on the subject of etching plastic materials is entitled to little or no weight.” slip op. at 33
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner proposes that the plain and ordinary meaning of the claim terms applies, and does not propose any specific construction for any claim term. Pet. 36. Patent Owner agrees with Petitioner’s statement regarding claim construction, i.e., that the plain and ordinary meaning applies and no express construction is required. Prelim. Resp. 12 (citing Pet. 36–37; Ex. 1003 ¶¶ 82–87). As Petitioner and Patent Owner do not dispute the meaning of any claim term, we decline to expressly construe any claim term, and instead apply the ordinary and customary meanings consistent with 37 C.F.R. § 42.100(b). See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”).” slip op. at 10
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,997,660
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.