- PTAB · May 21, 2025 · IPR2025-00193 · APJ Sheridan K Snedden · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 3, 6, 10, 11, 16, 18, 21, 24–26, or 30 were unpatentable on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner has not demonstrated a reasonable likelihood of success in proving that at least 1 claim of the ’030 patent is unpatentable.” slip op. at 2
- BurdenNot shown unpatentable
“What is missing from Petitioner’s stated motivation for modifying the array of Cantor is a reason why a POSA would seek to correlate the identification sequence with a location on the array at all. Prelim. Resp. 72. Indeed, the location of a bead on the substrate is not pertinent to the analysis disclosed in Cantor. Ex. 2002 ¶ 172; see also id. at ¶ 31 (Cantor “does not relate to the [spatial] analysis of tissue samples . . . .”). “[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). Here, Cantor fails to teach or suggest capture probes distributed randomly on a substrate comprising a nucleic acid sequence that identifies a unique location on the substrate as required by the challenged claims, and Petitioner fails to adequately articulate why a person of ordinary skill in the art would have modified Cantor to make the recited capture probes. In view of the above, we find that, on this record, Petitioner has failed to establish that Cantor teaches or suggests each element of the challenged claims. Accordingly, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on its challenge that any of claims 1, 3, 6, 10, 11, 16, 18, 21, 24–26, and 30 would have been obvious over Cantor.” slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner does not argue that any claim term requires construction. Pet. 22–23. Likewise, Patent Owner takes the position that “no claim terms 2 Person of ordinary skill in the art. require explicit construction” for purposes of determining whether to institute inter partes review. Prelim. Resp. 19. Having considered the parties’ positions and evidence of record, we determine that no express construction of any claim term is necessary to determine whether to institute inter partes review. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“What is missing from Petitioner’s stated motivation for modifying the array of Cantor is a reason why a POSA would seek to correlate the identification sequence with a location on the array at all. Prelim. Resp. 72. Indeed, the location of a bead on the substrate is not pertinent to the analysis disclosed in Cantor. Ex. 2002 ¶ 172; see also id. at ¶ 31 (Cantor “does not relate to the [spatial] analysis of tissue samples . . . .”). “[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). Here, Cantor fails to teach or suggest capture probes distributed randomly on a substrate comprising a nucleic acid sequence that identifies a unique location on the substrate as required by the challenged claims, and Petitioner fails to adequately articulate why a person of ordinary skill in the art would have modified Cantor to make the recited capture probes. In view of the above, we find that, on this record, Petitioner has failed to establish that Cantor teaches or suggests each element of the challenged claims. Accordingly, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on its challenge that any of claims 1, 3, 6, 10, 11, 16, 18, 21, 24–26, and 30 would have been obvious over Cantor.” slip op. at 20
Claim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,761,030 - PTAB · May 21, 2025 · IPR2025-00192 · APJ Sheridan K Snedden · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 5, 17, 20, 23, 28, or 29 were unpatentable over the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“To institute an inter partes review, we must determine that the information presented in the Petition shows “a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner has not demonstrated a reasonable likelihood of success in proving that at least 1 claim of the ’138 patent is unpatentable.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.” Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015). Here, Cantor fails to teach or suggest capture probes distributed randomly on a substrate comprising a nucleic acid sequence that identifies a unique location on the substrate as required by the challenged claims, and Petitioner fails to adequately articulate why a person of ordinary skill in the art would have modified Cantor to make the recited capture probes. In view of the above, we find that, on this record, Petitioner has failed to establish that Cantor teaches or suggests each element of the challenged claims. Accordingly, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on its challenge that any of claims 1, 5, 17, 20, 23, 28, and 29 would have been obvious over Cantor. slip op. at 21
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner
“3. Discussion Petitioner challenges whether certain elements of independent claims 1 and 17 are supported by the ’124 provisional and/or whether the ’138 patent’s priority chain is intact. Pet. 52–60. Having considered the parties’ positions and evidence of record, however, we agree with Patent Owner’s written description analysis, summarized above, and find (1) that the ’124 Provisional provides adequate written description support for each of the challenged claim elements; (2) that the ’138 patent’s priority chain is intact; and (3) that the ’138 patent is therefore entitled to the priority date of April 5, 2010. Consequently, Frisen is not prior art to the challenged claims.” slip op. at 28
- Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artDecided for patent owner
“3. Discussion Petitioner challenges whether certain elements of independent claims 1 and 17 are supported by the ’124 provisional and/or whether the ’138 patent’s priority chain is intact. Pet. 52–60. Having considered the parties’ positions and evidence of record, however, we agree with Patent Owner’s written description analysis, summarized above, and find (1) that the ’124 Provisional provides adequate written description support for each of the challenged claim elements; (2) that the ’138 patent’s priority chain is intact; and (3) that the ’138 patent is therefore entitled to the priority date of April 5, 2010. Consequently, Frisen is not prior art to the challenged claims.” slip op. at 28
Claim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,549,138 - SML Intelligent Inventory Solutions LLC / SML (USA) Inc. v. Adasa Inc.Institution deniedPTAB · May 20, 2025 · IPR2025-00125 · APJ Devon Zastrow Newman · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2019). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition, the Preliminary Response, and the evidence of record, we conclude that Petitioner has not established a reasonable likelihood of prevailing on its assertion that at least one challenged claim is unpatentable based on the grounds advanced here. Accordingly, we deny institution of inter partes review of claims 1–20 of the ’967 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“VSI Int’l Inc., 174 F.3d 1308, 1324 (Fed. Cir. 1999) (citing Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966); Ryko Mfg. Co. v. Nu-Star, Inc., 950 F.2d 714, 718 (Fed. Cir. 1991)). Petitioner adopts the following definition of a person of ordinarily skill in the art (hereafter, sometimes “POSITA”) of the ’967 patent proposed by Patent Owner in the Avery Dennison litigation: [A]t least a bachelor’s degree in electrical engineering, computer science, or computer engineering, or a related discipline, and at least five years of experience which would consist of, A, designing, developing, evaluating and/or using RFID or other AIDC [automatic identification and data capture] technologies in inventory management, unique object identification, and/or security; or B, studying and conducting research related to RFID technologies and using RFID and other AIDC technologies in inventory management, unique object identification, and/or security. Pet. 6 (citing Ex. 1030, 707:3–13). Patent Owner does not offer a definition of an ordinarily skilled artisan of the ’967 patent at this time. See generally Prelim. Resp. Based on the information presented, we find that the asserted prior art itself is sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself can reflect the appropriate level of ordinary skill in the art). To the extent a more precise definition is required, we apply Petitioner’s unopposed proposed definition for purposes of determining whether to institute review because it is consistent with the disclosures of the asserted prior art references and the problems addressed in the ’967 patent.” slip op. at 17
- Prior constructionPrior construction adoptedDecided for patent owner
“Petitioner proposes the following claim constructions: “an allocated block of serial numbers” as “a pre-authorized range of binary serial numbers” and “uniquely corresponding” as the “term’s plain and ordinary meaning, consistent with the articulation of the plain and ordinary meaning” in the Avery Dennison litigation. Pet. 8–12. As to the remaining claim terms, Petitioner applies the district court’s constructions in the Avery Dennison litigation. Id. at 12 (citing Ex. 1028). Patent Owner applies the following constructions that were entered during in the Avery Dennison litigation: “object class information space” as “data field within the memory of the RFID integrated circuit chip for information identifying the class of an object, such as a company prefix, item reference code, partition value, and/or filter value,” “unique serial number space” as “data field within the memory of the RFID integrated circuit for information identifying a unique serial number,” “being assigned a limited number of most significant bits” as “includes a limited, predefined sequence at the leading end,” “remaining bits of lesser significance” as “the remaining lower order bits at the trailing end,” “is encoded with one serial number instance” as “has stored within it one serial number instance,” “an allocated block of serial numbers” as “a pre-authorized range of serial numbers,” and “uniquely corresponding” as its plain and ordinary meaning. Prelim. Resp. 32. For purposes of resolving whether to institute trial, we adopt and apply the interpretations stated in the district court’s claim construction order and applied by the Federal Circuit on appeal, Ex. 1028.11 See 55 F.4th 900, 908–909, 912–913 (Fed. Cir. 2022) (citing the district court’s claim construction order).” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“IBM200 and Kuhno would have made it obvious for a POSITA to commission RFID tags with unique serial numbers partitioned into MSBs and bits of lesser significance. See Pet. 34–39; Ex. 1005 ¶¶ 167–176. However, on this record, Petitioner has not sufficiently shown that the POSITA, having read IBM200 and Kuhno, would have been led to create a serial number space in which the limited number of “most significant bits” uniquely corresponds to those bits assigned to an allocated block of serial numbers, as recited in limitation [f].” slip op. at 25
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 9,798,967 - Aardevo North America, LLC v. Agventure B.V.Institution deniedPTAB · May 1, 2025 · IPR2025-00136 · APJ Jeffrey N Fredman · IPR · Institution
Institution of inter partes review was denied for claims 1–10 because Petitioner did not establish a reasonable likelihood of prevailing on any asserted ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we find that on the current record Petitioner has not shown that it has a reasonable likelihood that it would prevail on these obviousness grounds. XII. DISCRETIONARY DENIAL – 35 U.S.C. § 325(d) In view of our determination that the Petitioner does not meet the threshold for instituting review on the merits, we need not address the parties’ dispute about whether the Board should exercise its discretion to deny institution under 35 U.S.C. § 325(d). Pet. 74–75; Prelim. Resp. 38–54; Pet. Reply 1–5; PO Sur-Reply 1–5. XIII. CONCLUSION After reviewing the information presented in the Petition and the Preliminary Response, we determine that, based on the evidence of record, Petitioner has not established a reasonable likelihood that claims 1–10 of the ’841 patent are unpatentable. XIV. ORDER Accordingly, it is ORDERED that, pursuant to 35 U.S.C. § 314(a), institution of an inter partes review of all challenged claims on all grounds presented in the Petition is denied.” slip op. at 35
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureNot shown unpatentableInherency not foundNot shown unpatentable
“However, neither Petitioner nor Dr. Jansky provide specific data on the record before us showing the actual measured homozygosity of either of the inbred lines, US-W 5309 and US-W 5315. And Phumichai experimentally demonstrates that Dr. Jansky’s assumption that theoretical heterozygosity reduction of 50% per generation is not necessarily accurate, stating the “observed average percentage of reduction of heterozygosity per generation (38.4% or 38.5%) was lower than the theoretically expected value of 50%.” Ex. 1005, 982. Indeed, Phumichai disclosed that the “SOPH [Section-based observed percentage of heterozygosity] decreased steadily from the original 100% in 99H2–1 (S0) to the family means of 62.4% in 3H2 (S1), 37.9% in 3H3 (S2).” Id. at 981. That is, Phumichai experimentally shows that in an S2 generation of a potato line, the heterozygosity was 37.9%, resulting in homozygosity of about 62.1%, below the 75% theoretically expected and the 75% required by claim 1 of the ’841 patent. Therefore, the evidence of record does not show that the S2 generation of potato lines in Jong necessarily satisfies the homozygosity recitation in claim 1 of the ’841 patent, and so cannot establish on the record before us that Jong inherently teaches this limitation.” slip op. at 15
- Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedNot shown unpatentableNot shown unpatentable
“Owner is telling. Petitioner does not refute Patent Owner’s evidence of objective indicia. On the current record, the objective indicia evidence is compelling. As to long felt need, Patent Owner cited evidence on record before the Examiner that showed a persistent need recognized by ordinarily skilled artisans. In re Gershon, 372 F.2d 535, 538 (CCPA 1967). For example, Dr. Huang states “This research is the breakthrough we have been waiting for since nearly a century . . . This is crucial for the potato breeding worldwide.” Ex. 2009, 687. There is no evidence that this long-felt need was satisfied by another before Appellant’s invention. See Newell Companies, Inc. v. Kenney Mfg. Co., 864 F.2d 757, 768 (Fed. Cir. 1988) (“[O]nce another supplied the key element, there was no long-felt need or, indeed, a problem to be solved . . . .”). Lastly, Dr. Lindhout explains that this invention satisfies the long-felt need, stating “I have discovered, and disclosed in the present application for patent, how a fertile homozygote in” slip op. at 33
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached
“XII. DISCRETIONARY DENIAL – 35 U.S.C. § 325(d) In view of our determination that the Petitioner does not meet the threshold for instituting review on the merits, we need not address the parties’ dispute about whether the Board should exercise its discretion to deny institution under 35 U.S.C. § 325(d). Pet. 74–75; Prelim. Resp. 38–54; Pet. Reply 1–5; PO Sur-Reply 1–5.” slip op. at 35
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,140,841 - Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Institution deniedPTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,346,014 - Honeywell International Inc. v. DSM IP Assets B.V.Institution deniedPTAB · Aug 21, 2024 · IPR2024-00493 · APJ Erica A Franklin · IPR · Institution
The Board denied institution because Honeywell did not show a reasonable likelihood that claims 1–9 were unpatentable over any of its three obviousness combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Accordingly, we determine that Petitioner has not shown a reasonable likelihood of prevailing in its obviousness challenge of independent claim 1 or dependent claims 2–9 over the combination of Simmelink and Section 73.1015.” slip op. at 23
- Skill levelOther
“PHOSITA) at the time of the ’532 patent “would have had at least a Bachelor’s degree in the field of chemistry, chemical engineering, polymer chemistry, or materials science and at least three years of relevant work experience in the field of high strength fibers.” Pet. 8 (citing Ex. 1003 ¶ 18). Petitioner adds that individuals with different educational backgrounds could still be of ordinary skill in the art if they have “additional experience [that] compensates for a deficit in their education and experience stated above.” Id. According to Patent Owner, a person or ordinary skill in the art, would have (i) a bachelor’s degree in chemistry, polymer chemistry, materials science, chemical engineering, or biomedical engineering and (ii) three years of experience in designing and manufacturing gel-spun UHMWPE yarns. At this level of skill, a PHOSITA would have a detailed understanding of the information provided in the Technology Background, Section II, supra, including (i) the differences between linear HDPE and UHMWPE, (ii) the history underlying Section 73.1015 and the early failures of the 1960s-era blue, melt-extruded polyethylene sutures, (iii) why the molecular orientation of polyethylene molecules leads to strong yarns in the special case of gel-spun UHMWPE, and (iv) the challenges associated with coloring gel-spun UHMWPE yarns, especially for end-use medical applications. Prelim. Resp. 33–34. We note that the parties’ proposed definitions are largely similar, except that Patent Owner additionally recognizes a Bachelor’s degree in biomedical engineering and requires experience in designing and manufacturing gel-spun UHMWPE yarns. In any event, we do not need to the same under either proposed definition.” slip op. at 6
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner
“a skilled artisan would have understood that the “gel spinning” process recited in the claims requires the use of a solvent during the spinning process. Indeed, the Specification describes this term, as follows: Gel spinning is understood to include at least the steps of spinning filaments from a solution of ultra-high molecular weight polyethylene in a spin solvent; cooling the filament obtained to form a gel filament removing at least partly the spin solvent from the gel filament; removing at least partly the spin solvent from the gel filament; and drawing the filament in at least one drawing step before during or after removing spin solvent. Ex. 1001, 2:31–37. We recognize the inventor’s lexicography as dispositive with respect to the meaning of the term “gel spinning.” See Phillips v. AWHCorp., 415 F.3d 1303, 1316 (Fed. Cir. 2005); SciMed Life Sys., Inc. v. Advanced Cardiovascular Sys., Inc., 242 F.3d 1337, 1343–44 (Fed. Cir.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for patent owner
“Claim 1 describes gel spinning as the manner by which the filaments comprised in the claimed colored multi-filament yarn are obtained. This, on its face, is a product-by-process claim element because it describes the filament structure being obtained in a particular way, i.e., by gel spinning. See Kamstrup A/S v. Axioma Metering UAB, 43 F.4th 1374, 1382 (Fed. Cir. 2022) (agreeing with the Board that “cast in one piece” is a product-by-process claim element as it describes the structure being cast “in a particular way”). For this element to be limiting, it must impart “structural and functional differences” that distinguish the claimed product from the prior art. See Amgen Inc. v. F. Hoffman-La Roche Ltd, 580 F.3d 1340, 1365–67 (Fed. Cir. 2009). Patent Owner argues persuasively that gel spinning imparts structural and functional differences to the claimed product because the process “creates overlap between polyethylene molecules within the UHMWPE filaments that maximizes the intermolecular Van der Waals interactions, resulting in highly crystalline filaments with high tensile strength.” Prelim. Resp. 38, 22 (citing Ex. 1014, 62–66). According to Patent Owner, “the structure of the gel spun UHMWPE is substantially different from other types of UHMWPE such as compression-molded and ram-extruded UHMWPE used to make joint replacements and other orthopedic implants.” Id. at 38.” slip op. at 9
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,280,532 - Nespresso USA, Inc. v. K-Fee System GmbHInstitution deniedPTAB · Jun 10, 2024 · IPR2024-00239 · APJ Jon B Tornquist · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–20 would have been obvious over either asserted combination.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). The standard for institution is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, Petitioner does not demonstrate a reasonable likelihood of prevailing with respect to any of claims 1–20 of the ’094 patent. Accordingly, we do not institute an inter partes review.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“The express language of the claim, however, does not support using the “central axis” as the measuring point for determining if one object is laterally offset from another. For example, the term “central axis” is not used in the relevant claim phrase and the dictionary definitions of “lateral” relied upon by Petitioner and Mr. Jobin to show the ordinary meaning of the claim term do not suggest that the “central axis” is the reference point for determining whether a first object is “laterally offset” from a second object. As such, we determine that the claim language supports Patent Owner’s construction requiring that the “groove” be “off to the side” of the entire mandrel, and not merely the “central axis” of the mandrel. Prelim. Resp. 54. We must also resolve whether the entire groove is required to be laterally offset from the chamfered mandrel, or only a portion of it. On this point, the claims do not use the term “portion,” but rather specify that the “groove” is “laterally offset from the chamfered mandrel.” Ex. 1001, 14:4– 5, 15:19–20. This suggests that the entire “groove” must be offset from the “chamfered mandrel.”” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“That argument, however, does not explain why it would have been obvious to laterally offset the groove of Yoakim from the chamfered mandrel. Rather, as demonstrated by Mr. Jobin’s testimony, this argument relates to the general use of a sealing member in a groove, to the extent it was ultimately determined that such a configuration is not expressly disclosed in Yoakim. Id.; Ex. 1003 ¶ 296 (“It would have been obvious to one skilled in the art to position a sealing member in a groove to solidify the between counter-force portion 161 and engaging portion 157 in Figure 35 of Yoakim is more appropriately identified as the claimed “groove.” Prelim. Resp. 60–61. We need not resolve this issue, however, as Petitioner does not persuasively demonstrate that either potential “groove” is “laterally offset” from the chamfered mandrel. placement of the seal and improve its sealing stability and strength. Furthermore, it would have been obvious to one skilled in the art to utilize a groove and seal configuration in the brewing head . . . .”) (emphasis added). Even if we interpret the recited portion of the Petition as an argument for placing the groove entirely to the side of the mandrel in Yoakim, the Petition does not persuasively explain why one of ordinary skill in the art would have sought to do so. In Figure 35 of Yoakim, the seal and groove, as well as an elastic loading means, act as a valve means to control the level of pressure exerted in the capsule and “optimize interaction of water and the ground coffee particles to obtain a good extraction of the coffee and aroma compounds.” Ex. 1004 ¶¶ 370–372, 382, 396–398, 434–436, 445; Ex. 1003 ¶¶ 286–290; Pet. 63. These are the same beneficial properties relied upon by Petitioner to support the proposed combination, and Petitioner does not persuasively explain why one of ordinary skill in the art would have modified Yoakim in order to achieve results that are already obtained in the identified embodiment. Pet. 63. In view of the foregoing, we determine that Petitioner does not demonstrate a reasonable likelihood that claims 1 and 12 would have been obvious over the combined disclosures of Yoakim, Jarisch 929, and Rossi.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,542,094 - PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips - Mara Renewables Corporation v. DSM IP Assets, B.V.Institution deniedPTAB · Apr 18, 2024 · IPR2024-00070 · APJ Zhenyu Yang · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood that claims 1–15 were anticipated by Radianingtyas or obvious over either asserted combination.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“We have authority under 35 U.S.C. § 314, which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine Petitioner has not demonstrated a reasonable likelihood that it would prevail with respect to at least one claim challenged in the Petition. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, we construe the claim term “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id.; see also Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (holding that the words of a claim “are generally given their ordinary and customary meaning,” which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention, i.e., as of the effective filing date of the patent application”). Claim terms need only be construed to the extent necessary to resolve the controversy. Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011). On this record and for purposes of this Decision, we see no need to construe any claim term.” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not provide a definition of the level of ordinary skill in the art. See Prelim. Resp. 19. Patent Owner also states that any differences between the parties’ proposed definition of the skill level would not impact its arguments. Id. For purposes of this Decision, we adopt Petitioner’s definition of the skill level because it is consistent with the prior art’s demonstration of the level of ordinary skill at the relevant time. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 7
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“triglyceride, DHA, and heptadecanoic acid content recited therein. In order to anticipate a claim, a prior art reference “must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements arranged as in the claim.” NetMoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1370 (Fed. Cir. 2008) (quotation marks omitted). A reference, however, can anticipate a claim “even if it does not expressly spell out all the limitations arranged or combined as in the claim, if a person of skill in the art, reading the reference, would at once envisage the claimed arrangement or combination.” Microsoft Corp. v. Biscotti, Inc., 878 F.3d 1052, 1068 (Fed. Cir. 2017) (quotation marks and brackets omitted). As explained below, here, Petitioner has not shown Radianingtyas discloses a microbial oil comprising the required triglyceride, DHA and heptadecanoic acid content. Specifically, although the exemplified strain ONC-T18 produces oil that meets the claimed triglyceride fraction and heptadecanoic acid level, Petitioner has not shown the same oil contains the recited DHA level.” slip op. at 10
Claim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 8,207,363 - Amperex Technology Ltd. v. Semiconductor Energy Laboratory Co., Ltd.Institution deniedPTAB · Mar 12, 2024 · IPR2023-01349 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving any challenged claim unpatentable on the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons set forth below, we determine the information presented in the Petition does not establish a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Accordingly, we do not institute an inter partes review of any claim on any ground asserted in the Petition.” slip op. at 2
- BurdenDenied
“Given this, to show that Blangero’s disclosure of MgO or LiF in its coating teaches or suggests a rock-salt crystal structure, Petitioner needs to explain why a person of ordinary skill in the art either would have understood the compounds to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO or LiF in a rock-salt crystal structure rather than in another available form. On the first point, Petitioner argues that “‘the stable phase at room temperature and pressure conditions’ of MgO is ‘a rocksalt cubic structure of NaCl (space group Fm-3m).’” Pet. 28 (quoting Ex. 1030, 16; citing Ex. 1003 ¶ 142). But, as Petitioner’s declarant, Dr. Hayes, points out, Blangero does not teach forming MgO in a room-temperature process. Ex. 1003 ¶ 142 (Blangero’s “second firing step” occurs at “925 °C for 12 hours”); see Ex. 1005 ¶ 110 (teaching the firing step to which Dr. Hayes refers). Thus, the significance of rock-salt-type MgO being “the stable phase at room temperature and pressure conditions” is unclear. To the extent that Dr. Hayes explains why MgO, which “is well known to crystallize even at substantially lower temperatures,” such as “room temperature and pressure conditions,” would “do so more readily at [a higher temperature of] 925 °C,” this argument is not discussed, nor even cited, in the Petition. Ex. 1003 ¶¶ 90–94; see Pet. 28. Accordingly, any reliance on this argument by Petitioner constitutes improper incorporation by reference. 37 C.F.R. § 42.6(a)(3). Thus, Petitioner does not show sufficiently that a person of ordinary skill in the art either would have understood MgO to have a rock-salt crystal structure when manufactured according to the disclosure of Blangero or would have chosen to use MgO in a rock-salt crystal structure rather than in another available form. Similarly, with respect to LiF, neither Petitioner nor Dr. Hayes sufficiently explains the choice of rock-salt-type material over other options. Pet. 29 (arguing only that Ex. 1013 shows that “LiF has rock salt structure”); Ex. 1003 ¶ 143 (same). Thus, Petitioner does not show sufficiently that Blangero teaches or suggests a rock-salt crystal structure by virtue of its teaching that either MgO or LiF is present.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not found
“The 2012 study on which Petitioner relies did not find “superior structural stability” over other lithium-titanium-oxygen compounds, as Petitioner argues. Instead, the study noted that the structure of “LiTiO2 prepared by high-temperature sintering TiO2 with lithium salt . . . impl[ies] LiTiO2 has superior structural stability in organic electrolyte as compared to other Li-Ti-O oxides.” Ex. 1029, 1. Thus, the structural stability was implied from the chemical structure of the material rather than found through study of the material. Moreover, the implied structural stability was only for LiTiO2 that was prepared in a particular way, by high-temperature sintering of TiO2 with lithium salt, and Petitioner does not allege that a person of ordinary skill in the art would have prepared the LiTiO2 they substituted for Blangero’s Li2TiO3 using this method. As for Petitioner’s argument that the study found that LiTiO2 outperformed Li2TiO3, we are not persuaded. The study compared particles with an LiTiO2 coating to uncoated particles, not to particles coated with Li2TiO3. Ex. 1029, 4, Figs. 4(c), 4(d). Although the study notes that particles coated with “[m]onoclinic Li2TiO3 and spinel Li4Ti5O12” exhibit “a noticeable capacity decay . . . when charged at high operating voltage and cycled above room temperature,” it concludes only that particles coated with LiTiO2 “exhibited inspiring high-voltage cycling capability as well as thermal stability than the pristine counterpart.” Id. at 1, 4. In addition, the pristine particles used in the study were made from “Li[NixCoyMnz]O2 (0≤x,y,z<1) (called as LNCM),” and the particles in Blangero do not contain either nickel or manganese in their cores. Ex. 1005 ¶¶ 9–40 (particles contain lithium, oxygen, cobalt, and metals chosen from the group consisting of aluminum, gallium, boron, magnesium, titanium, iron, copper, calcium, barium, yttrium, tin, antimony, sodium, zinc, zirconium, silicon); Ex. 1029, 1. Petitioner does not explain why a person of ordinary skill in the art would expect the study’s results to extend to Blangero’s particles made from a different material. Pet. 29–30. Because Petitioner has not shown sufficiently that Blangero teaches or suggests a second region comprising a rock-salt crystal structure or that a person of ordinary skill in the art would have had a reason to substitute rocksalt-type LiTiO2 for the materials disclosed in Blangero, Petitioner has not shown a reasonable likelihood that it would prevail on claim 1 on its Blangero-based grounds.” slip op. at 15
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner, “[i]ndividuals with different education and additional experience could still [have been] of ordinary skill in the art if that additional experience compensate[d] for a deficit in their education and experience.” Id. On the present record, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art. Prelim. Resp. 19. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’660 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’660 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,043,660
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.