- Ascend Elements, Inc. v. Duesenfeld GmbHInstitution deniedPTAB · Oct 10, 2025 · PGR2025-00037 · APJ Kevin W Cherry · PGR · Institution
The Board denied institution of PGR on claims 1–14 because Petitioner did not show that any challenged claim was more likely than not unpatentable.
In the decision…residual voltage if the battery units are damaged in the process.” Ex. 1005 ¶ 5. Although we do not agree with Patent Owner that this amounts to a “teaching away,” see In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994), we do believe that this teaching suggests a trade off that should be weighed in…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition filed under [35 U.S.C. §] 321 . . . demonstrates that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons set forth below, we determine that Petitioner has failed to demonstrate that it is more likely than not that at least one of claims 1–14 of the ’463 patent is unpatentable. Accordingly, we deny institution of a postgrant review of claims 1–14 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had at least a Bachelor’s degree in electrical engineering, material science, chemical engineering, or an equivalent field, as well as at least 2 to 3 years of academic or industry experience in the recycling or processing of lithiumion batteries. Additional formal education focusing on processing of lithium batteries may substitute for practical experience and additional practical experience can substitute for less education.” Pet. 10–11. Patent Owner does not contest this definition of a person of skill in the art. See Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as, on the present record, it appears consistent with the ’463 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“distinct from “comminute[ion],” Petitioner offers only the testimony of its expert, Mr. Juzkow, who equates Tomioka’s “cutting” with “comminute[ion].” See Ex. 1003 ¶ 121. However, Mr. Juzkow provides insufficient reasoning to support his conclusion, particularly given the intrinsic and extrinsic evidence discussed above. In contrast, Patent Owner’s expert, Mr. Dantam, provides extensive reasoning, supported by citations to other evidence, to support his conclusion that Tomioka’s “dismantling” is not the claimed “comminution.” Thus, we give more weight to Mr. Dantam’s testimony than Mr. Juzkow’s testimony. Weighing this evidence all together, we find that Petitioner has failed to show that it is more likely than not that Tomioka’s teaches the claimed comminution under Petitioner’s first theory.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundTeaching away not foundNot shown unpatentable
“obvious. Pet. 34–35. However, we agree with Patent Owner that Petitioner has also failed to show that it is more likely than not that Tomioka renders this limitation obvious. See Prelim. Resp. 28–31. To begin with, Petitioner’s contentions lack sufficient reasoning explaining why a person of ordinary skill would have modified Tomioka in the manner proposed. “[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006). Petitioner merely asserts that a person of ordinary skill in the art could use the roller system in place of the dismantling disclosed for the embodiments in Figures 19 and 20. On this record, we find this bare contention insufficient. actual disclosure of Tomioka. The rollers in Tomioka are used to separate the “battery body” from the “resin package enclosing the battery body,” and Tomioka specifically discloses that this technique is designed to “avoid damaging the battery body.” Ex. 1005 ¶¶ 25, 26, 29; Ex. 2011 ¶¶ 72–73. Thus, there is a significant difference between what Tomioka teaches and what Petitioner proposes to use the roller system to do. In addition, as Patent Owner points out, Tomioka specifically discloses there are risks associated with mechanically crushing battery packs, such as “risk of sparking due to residual voltage if the battery units are damaged in the process.” Ex. 1005 ¶ 5. Although we do not agree with Patent Owner that this amounts to a “teaching away,” see In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994), we do believe that this teaching suggests a trade off that should be weighed in determining whether to make the modification, see Medichem S.A. v. Rolabo S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). However, Petitioner has failed to account adequately, if at all, for this trade off. Thus, we find that Petitioner has failed to show that it is more likely than not that Tomioka accounts for the claimed “comminuting.”” slip op. at 15
§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 12,119,463 - Mahle Behr Charleston Inc. v. Frank Amidio CatalanoInstitution deniedPTAB · Nov 15, 2023 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable on the asserted grounds.
In the decision…of what, in some sense, is already known.” KSR, 550 U.S. at 418–19. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“On this record, we determine that Petitioner advances Dr. Medlin’s testimony to make out a claim limitation that is not suggested, much less taught, by the text of the prior art reference at hand. Because that testimony lacks objective support or adequate technical reasoning, it is entitled “little weight” and, moreover, is insufficient to support institution of trial. Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (Aug. 24, 2022) (precedential). Dr. Medlin’s remaining testimony relies on the testimony we have discussed so far. Ex. 1004 ¶¶ 201–204, 207–210, 224–226. Accordingly, this testimony does not show sufficiently that Tomosada would have suggested to a person of ordinary skill in the art that anodes should be placed within 10 inches of Tomosada’s hot liquid inlet. Because Petitioner relies on Dr. Medlin’s testimony to show that a person of ordinary skill in the art would have understood that Tomosada suggested placing an anode within 10 inches of a hot liquid inlet to a radiator, and because that testimony does not show sufficiently that a person of ordinary skill in the art would have had such an understanding, we determine that Petitioner has not shown a reasonable likelihood of prevailing with respect to any claim challenged on the basis of Tomosada.” slip op. at 13
- Expert testimonyPetitioner expert discountedDecided for patent owner
“To show obviousness, it is not enough to merely show that the prior art includes separate references covering each separate limitation in a challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “Rather, obviousness requires the additional showing that a person of ordinary skill at the time of the invention would have selected and combined those prior art elements in the normal course of research and development to yield the claimed invention.” Id. (citing KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 421 (2007)). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–19. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). Nevertheless, “[a] factfinder should be aware, of course, of the distortion caused by hindsight bias and must be cautious of arguments reliant upon ex post reasoning.” KSR, 550 U.S. at 421.” slip op. at 6
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art “would have had at least a bachelor’s degree in mechanical engineering, metallurgical engineering, or materials science engineering, and have two or more years of experience in mechanical engineering, metallurgical engineering, or materials science engineering and/or corrosion prevention system design.” Pet. 16 (citing Ex. 1004 ¶¶ 72–75). According to Petitioner, “[a] person could also have qualified as a [person of ordinary skill in the art] with some combination of more formal education (e.g., a Ph.D.) and less technical experience,” or vice versa. Id. at 16–17. “To the extent necessary, the [person of ordinary skill in the art] may have collaborated with other skilled artisans, such that the individual and/or team collectively would have had experience and/or knowledge or particular characteristics of a radiator system.” Id. at 17. “For the limited purpose of [its] Preliminary Response, Patent Owner does not contest Petitioner’s definition of a person of ordinary skill in the art, but it reserves the right to do so if trial is instituted.” Prelim. Resp. 7. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’494 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’494 patent and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“C. Claim Construction In an inter partes review, we construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc). 37 C.F.R. § 42.100(b) (2022). Under Phillips, claim terms are afforded “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id. Both parties argue that we need not construe any terms in order to decide whether to institute trial. Pet. 17; Prelim. Resp. 8. We agree. After considering the arguments and information presented in the Petition and Preliminary Response, we determine that we do not need to construe any terms expressly for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 8
Claim constructioncites Phillips · KSR · Graham - Globalfoundries Inc. / Globalfoundries U.S. Inc. et al. v. Katana Silicon Technologies LLCInstitution deniedPTAB · Dec 6, 2022 · IPR2022-01083 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under the asserted obviousness grounds.
In the decision…Resp. 17–19. On the present record, we agree with Patent Owner that Petitioner has not shown sufficiently that it would have been obvious from the teachings of Shirakawa to make Shirakawa’s layer 3ʹ by diffusion. We note first that Petitioner is correct that Shirakawa teaches patterning its layer…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2020). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” After considering the Petition, the Preliminary Response, and the evidence of record, we determine that Petitioner has not demonstrated a reasonable likelihood that it would prevail with respect to at least one challenged claim. Accordingly, we do not institute an inter partes review of any challenged claims on any ground asserted in the Petition.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed patent owner constructionDecided for patent owner
“it is used consistently throughout. First, in describing related prior art, the ’903 patent states that “[t]he through plug is constituted of an insulating material covering a sidewall of a through hole and a low electrical resistance metal material . . . in a columnar shape that is positioned so as to be surrounded by the insulating material and that serves as a conductive member.” Ex. 1001, 1:35–40. In describing its own drawings, reference numeral 15 consistently is used to refer to the “through plug.” Id. at 2:37– 52. Figures 1A and 1B “are views schematically showing the structure of a semiconductor device (semiconductor chip) according to an embodiment of the present invention.” Id. at 5:46–48, Figs. 1A, 1B. In these figures, reference numeral 15 refers to “[a] through plug.” Id. at 6:16. This through plug “is constituted of a columnar electric conductor 15a . . . and an insulation layer 15b . . . surrounding the electric conductor 15a.” Id. at 6:21–25. Similarly, reference numeral 15 refers to the “through plug” in Figures 1C, 2A, 2B, 3, 4, 5, 6, 7A, and 7B. Id. at 6:35–40, 7:10–38, 8:10– 17, 8:32–38, 8:65–9:43. Where it is referred to in these same parts of the ’903 patent, the conductive core is discussed as merely a portion of the through plug and is referred to by the reference numeral 15a. Id. Thus, the ’903 patent consistently defines the through plug as having two portions: both a conductive core and a surrounding insulation layer. This is true whether the patent is referring to either of its disclosed embodiments or the prior art. Based on this unambiguous usage, we determine that the ’903 patent defines the term “through plug” as including both a conductive core and a surrounding insulating layer. See Phillips, 415 F.3d at 1320–21 (“the specification ‘acts as a dictionary when it expressly defines terms used in the claims or when it defines terms by implication’” (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996))).” slip op. at 5
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentable
“We are not persuaded that the Petition adequately identifies how Christensen teaches or suggests a through plug as that term is used in the ’903 patent. As noted above, the ’903 patent requires a through plug to have both a conductive core and a surrounding insulating layer. It is clear on the current record that Christensen’s “conductive stud” could correspond to the conductive portion of such a through plug. Ex. 1033, 4:66–5:1 (“the stud 34 may comprise any number of conductive materials”). But Petitioner does not show sufficiently that Christensen teaches or suggests the surrounding insulating layer necessary to turn the conductive core into a through plug. First, Petitioner does not allege that Christensen teaches or suggests such a layer. Pet. 33–34. Second, Christensen discloses the use of “conductive materials” and “material[s] which promote[] adhesion to the surrounding oxide such as titanium or titanium nitride.” Ex. 1033, 4:66–5:1, 5:15–20. None of these materials are identified by Christensen as insulators. Id. Accordingly, we are not persuaded on the current record that Petitioner has shown sufficiently that Christensen alone teaches or suggests the through plug of the challenged claims. b. Christensen and Lin Petitioner also argues that the combination of Christensen and Lin teaches or suggests the through plug of the challenged claims. Pet. 34–36. Specifically, Petitioner argues that “[t]o the extent [it is determined] that Christensen alone is not sufficient because the conductive stud 34 does not extend all the way through wafer 12, Christensen in view of Lin renders obvious a ‘through plug.’” Id. at 34. According to this argument, “Lin teaches a backside process for forming ‘a conductive plug through a silicon’ wafer and an insulation layer,” and it would have been obvious to form such a plug “from the backside of the wafer 12 below [Christensen’s] conductive stud 34,” such that the combination of the two structures would form a conductive path all the way through the structure of Christensen’s Figures 8B and 9. Id. at 34–35 (emphasis omitted). As with the argument based on Christensen alone, however, this argument does not show sufficiently that the combination of Christensen and Lin teaches or suggests a through plug that has both a conductive core and a surrounding insulating layer. Lin describes its structure as a “conductive plug” and does not describe any insulation surrounding that structure. Ex. 1054, 1:60–64, 3:2– 34, 4:23–32, Fig. 7. “The conductive plugs” of Lin “typically compris[e] metal,” which Lin does not describe as an insulator. Id. at 3:21–25. Nor does Petitioner allege the presence of a conductive core surrounded by insulation either in Lin itself or in the combination of Lin and Christensen. Pet. 34–36. Accordingly, we are not persuaded on the current record that Petitioner has shown sufficiently that the combination of Christensen and Lin teaches or suggests the through plug of the challenged claims.” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not found
“An invention is not obvious just ‘because all of the elements that comprise the invention were known in the prior art.’” Broadcom Corp. v. Emulex Corp., 732 F.3d 1325, 1335 (Fed. Cir. 2013) (quoting Power-One, Inc. v. Artesyn Techs., Inc., 599 F.3d 1343, 1351 (Fed. Cir. 2010)). Instead, “a finding of obviousness at the time of invention requires a ‘plausible rational[e] as to why the prior art references would have worked together.’” Id. (quoting Power-One, 599 F.3d at 1352). This rationale requires “some articulated reasoning with some rational underpinning” to combine the known elements in the manner required in the claim at issue. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). “[I]t can be important to” include within this reasoning “a reason that would have prompted a person of ordinary skill in the relevant field to combine the elements in the way the claimed new invention does.” Id. Here, Petitioner offers two reasons to combine the teachings of Shim and Shirakawa. First, Petitioner argues that “Shim’s diffusion teachings would facilitate the formation of” Shirakawa’s collector layer. Pet. 65–66. On the present record, we do not find this reason sufficiently persuasive. Even though Shim does teach a way to make the n-GaAs that Shirakawa uses, Shirakawa teaches a different way to make the same material, and other prior-art references agree with Shirakawa. Ex. 1022, 1:34–40 (“silicon ions of a silicon layer formed on a GaAs substrate are diffused by means of ion-implantation method using little energy and annealing treatment”); Ex. 1005, 9:36–42 (first embodiment “collector layer” is “laminated on top of a semi-insulating GaAs substrate . . . by epitaxial growth process”), 12:47–48 (fourth embodiment made in same way as first embodiment); Ex. 1016, 8:7–19 (“a highly doped n type GaAs subcollector layer . . . [and other layers] are made to grow above a semiinsulating GaAs substrate . . . by a metal organic vapor phase epitaxial growth method”); Ex. 1025, 4:40–45 (teaching “[f]orming two flat epitaxial layers of gallium arsenide to obtain [a] collector,” including “a layer . . . of the n+ conductivity type and a layer . . . of the n -conductivity type” by “epitaxial growth . . . from the vapour phase or from the liquid phase”). The mere fact that Shim offers an alternative process does not, in the absence of a reason to adopt that alternative process, provide a reason for a person of ordinary skill in the art to make Shirakawa’s n-GaAs via Shim’s method rather than via Shirakawa’s own method. In addition, Patent Owner’s declarant, Dr. Peter Elenius, testifies that the ion implantation involved in Shim’s diffusion process would damage Shirakawa’s gallium arsenide in a way that would dissuade a person of ordinary skill in the art from using that process to produce the HBT of Shirakawa. Ex. 2001 ¶¶ 52–57. The other reason that Petitioner provides to combine the teachings of Shim and Shirakawa is that Shim’s diffusion “method us[es] little energy and annealing treatment.” Pet. 66 (quoting Ex. 1022, 1:34–40). Shim’s method is described as “diffus[ion] by means of ion-implantation method using little energy and annealing treatment,” which Shim distinguishes from earlier methods “widely used in the art,” which involved “ion-implantation . . . using high energy.” Ex. 1022, 1:12–40. Shim teaches that its lower-energy ion implantation does not suffer from the “problem” of the earlier method, “damaging of ohmic contacts of metal electrodes” due to the injection of “lots of impurity ions.” Id. at 1:17–22; see id. at 3:37–40 (“the manufacturing method of the present invention can prevent damage to be generated in ohmic contacts of source/drain electrodes due to ion-injecting of high density”). Thus, the lower energy of Shim’s process is a benefit of that process over earlier ion implantation processes, which use higher energy. Shim does not teach that its use of lower-energy ion implantation is an improvement over other processes, such as the epitaxial growth taught by Shirakawa and the other references cited by Petitioner. Thus, Petitioner does not explain sufficiently why lower energy would be a benefit of the Shim- Shirakawa combination over Shirakawa alone. Accordingly, we are not persuaded on the current record that Petitioner has shown sufficiently that a person of ordinary skill in the art would have had a reason to combine the teachings of Shirakawa and Shim to arrive at a combination that teaches or suggests the “diffusion layer patterns” of the challenged claims. slip op. at 15
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 7,402,903 - FTC Solar, Inc. v. FCX Solar, LLCInstitution deniedPTAB · Nov 28, 2022 · IPR2022-01101 · APJ Donna M Praiss · IPR · Institution
The Board denied institution because the Petition did not show a reasonable likelihood that any challenged claim was unpatentable on any asserted ground.
In the decision…or suggests “the damper having a first damping ratio” and “the damper . . . having a second damping ratio.” The Petition relies on Kull for this teaching. Pet. 34. Following the recitation of the claim language, the Petition quotes from this sentence in Kull’s disclosure: The damper is…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b); 37 C.F.R. § 42.4(a) (2020). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.”” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had at least an undergraduate degree in mechanical engineering, physics, or a similar discipline, and at least three to five years of work experience designing, analyzing, or evaluating solar trackers.” Pet. 6 (citing Ex. 1003 ¶¶ 35–39). Patent Owner supplements Petitioner’s description of a POSITA to include as similar disciplines “applied aerodynamics, aerospace engineering, fluid dynamics, photovoltaic systems engineering” and asserts that a POSITA in the field of solar trackers would “enlist the expertise of a damper expert in designing the dampers to provide desired characteristics to trackers.” Prelim. Resp. 14. For the purposes of this Decision, we adopt Petitioner’s description of the level of one of ordinary skill in the art, as modified by Patent Owner; any differences between the parties’ descriptions do not affect our analysis. The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). slip op. at 6
- Prior constructionPrior construction adoptedDecided for patent owner
“In the litigation, the District Court determined that a person having ordinary skill in the art would understand “damping ratio” to refer to “the damper providing the photovoltaic system with different damping ratios depending on the conditions.” Ex. 2005, 6:15–20. The District Court noted that intrinsic evidence supports “references to a damper having a [damping] ratio are made in the context of a damper installed in a system and are not about a damper in isolation.” Id. at 6:21–25. The District Court also noted that FTC’s7 expert, Dr. Codd, recognized that “pluck testing is the primary tool for determining a damping ratio, and that a person of ordinary skill in the art would be familiar with how to perform pluck testing.” Id. at 8:4–7. In view of the parties’ agreed-upon definition of the term “damping ratio” and the District Court’s claim construction analysis, we construe “damping ratio” to mean “a ratio determined by dividing the actual damping coefficient of a system by the critical damping coefficient of the system.”” slip op. at 7
- Expert testimonyPetitioner expert discountedDecided for patent owner
“parameter that is used imprecisely in the claims of the ’782 Patent to signify the damping force provided by the damper to the system.” Pet. 7 n.4 (citing Ex. 1003 ¶ 40 n.7). Thus, the Petition acknowledges a difference between the terms “damping ratio” and “damping force.” The footnote concludes “[h]ere, Petitioner has adopted Patent Owner’s interpretation of ‘damping ratio’ to signify the damping force provided by the damper to the invariant system.” Id. Petitioner cites to paragraph 40 n.7 of the Codd Declaration to support its assertion, but that paragraph parrots the language in the Petition, and Dr. Codd does not provide the underlying facts supporting his testimony.9 See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”).” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 10,903,782 - Axalta Coating Systems, LLC v. PPG Industries Ohio, Inc.Institution deniedPTAB · Sep 12, 2022 · IPR2022-00676 · APJ Elizabeth M Roesel · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 1–19 obvious over the asserted combinations.
In the decision…on Grubenmann and Vernardakis. Pet. 22, 49, 54; Ex. 1003 ¶¶ 85, 187, 209. Petitioner asserts that a POSA would have been motivated to combine the teachings of Kasari and Kondo “to achieve ‘superior’ transparency and ‘an extremely low haze value’ . . . [and] to achieve greater transparency,…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). After considering the information presented in the Petition and the Preliminary Response, we determine that the reasonable likelihood standard is not met. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“would have had “at least a Bachelor’s or Master’s degree in the field of polymer chemistry, polymer coatings, materials science and/or a related field and at least two years of practical experience in the development of coating systems for consumer products.” Pet. 11. For purposes of the Preliminary Response, Patent Owner does not dispute Petitioner’s definition of a POSA. Prelim. Resp. 8. For purposes of this Decision, we apply Petitioner’s definition of a POSA, which is consistent with the scope and content of the ’505 Patent and the asserted prior art.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“standard as would be used by a district court to construe a claim in a civil action involving the validity or infringement of a patent. 37 C.F.R. § 42.100(b). Under that standard, claim terms are given their ordinary and customary meaning, as would have been understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history of record. Id.; Phillips v. AWH Corp., 415 F.3d 1303, 1312–19 (Fed. Cir. 2005) (en banc); Thorner v. Sony Comput. Entm’t Am. LLC, 669 F.3d 1362, 1365–66 (Fed. Cir. 2012). “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not need to resolve any claim construction disputes for purposes of this Decision.” slip op. at 7
- Obviousness (§103) › Analogous artNon analogous artNot shown unpatentable
“sufficiently that a POSA looking to improve a three-layer coating for automobiles as disclosed in Kasari or Hall would have looked to Kondo, which teaches laminated glass for windshields. Although Petitioner asserts that “[Kasari] and Kondo each teach multi-layer systems with a transparent colored middle layer that can be used in the automobile industry” (Pet. 20) and makes a similar assertion about Hall and Kondo (Pet. 48), such high-level similarity is not a sufficient obviousness rationale. See Securus Techs., Inc. v. Glob. Tel*Link Corp., 701 F. App’x 971, 977 (Fed. Cir. 2017) (“We agree with the Board that a broad characterization of [asserted references] as both falling within the same alleged field . . . without more, is not enough for [petitioner] to meet its burden of presenting a sufficient rationale to support an obviousness conclusion.”). Petitioner fails to show that Kondo’s interlayer for bonding two glass plates is sufficiently relevant to the intermediate coating layer of Kasari or Hall that a POSA would have applied Kondo’s teachings to the organic pigments that may be used in the intermediate coating layer. Kondo teaches a glass-bonding interlayer containing ultra-fine inorganic particles for providing colorlessness or a color tone, heat insulation, and ultraviolet ray insulation, without adversely affecting the bond strength of the interlayer or the haze, radio transmittance, transparency, and durability of the glass laminate. Ex. 1006, 2:25–31, 2:39–47, 3:2–9. In contrast, Kasari and Hall both teach an intermediate coating layer that may contain an organic or inorganic pigment. Ex. 1009, 9:50–64; Ex. 1010 ¶ 32. Petitioner does not provide a sufficient reason why a POSA would consider Kondo’s teaching about ultra-fine inorganic particles for providing colorlessness or a color tone, heat insulation, and ultraviolet ray insulation in a glass-bonding layer, when selecting organic pigments for use in the intermediate coating layer of Kasari or Hall. Petitioner also does not explain why a POSA would rely on the particle size of Kondo’s particles in isolation from Kondo’s teaching of inorganic pigments as the ultra-fine particles. See In re Wesslau, 353 F.2d 238, 241 (CCPA 1965) (“It is impermissible within the framework of section 103 to pick and choose from any one reference only so much of it as will support a given position, to the exclusion of other parts necessary to the full appreciation of what such reference fairly suggests to one of ordinary skill in the art.”).” slip op. at 18
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,981,505 - Axalta Coating Systems, LLC v. PPG Industries Ohio, Inc.Institution deniedPTAB · Sep 12, 2022 · IPR2022-00675 · APJ Elizabeth M Roesel · IPR · Institution
The Board denied institution because Axalta did not show a reasonable likelihood that claims 1–19 were unpatentable on any asserted obviousness ground.
In the decision…relies on Kondo, Grubenmann, and JP ’535. Pet. 23–24, 37–38, 48–49. Petitioner asserts that a POSA would have been motivated to combine the teachings of EP ’931 and Kondo “to achieve ‘superior’ transparency and ‘an extremely low haze value.’” Pet. 20 (quoting Ex. 1006, 2:39–42). When…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2022). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). After considering the information presented in the Petition and the Preliminary Response, we determine that the reasonable likelihood standard is not met. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Obviousness (§103) › Analogous artNon analogous artDecided for patent owner
“for combining the teachings of EP ’931 and Kondo in a manner that would result in the claimed invention. Petitioner does not show sufficiently that a POSA looking to improve a three-layer coating for automobiles as disclosed in EP ’931 would have looked to Kondo, which teaches laminated glass for windshields. Although Petitioner asserts that “[b]oth EP ’931 and Kondo teach multi-layer systems intended for use in the automobile industry” (Pet. 20), such high-level similarity is not a sufficient obviousness rationale. See Securus Techs., Inc. v. Glob. Tel*Link Corp., 701 F. App’x 971, 977 (Fed. Cir. 2017) (“We agree with the Board that a broad characterization of [asserted references] as both falling within the same alleged field . . . without more, is not enough for [petitioner] to meet its burden of presenting a sufficient rationale to support an obviousness conclusion.”). Petitioner fails to show that Kondo’s interlayer for bonding two glass plates is sufficiently relevant to EP ’931’s intermediate coating layer that a POSA would have applied Kondo’s teachings to the organic pigments in the intermediate coating layer. Kondo teaches a glass-bonding interlayer containing ultra-fine inorganic particles for providing colorlessness or a color tone, heat insulation, and ultraviolet ray insulation, without adversely affecting the bond strength of the interlayer or the haze, radio transmittance, transparency, and durability of the glass laminate. Ex. 1006, 2:25–31, 2:39– 47, 3:2–9. In contrast, EP ’931 teaches an intermediate coating layer containing organic pigments that interact with metallic flake in the base coat to provide a color shift that varies with viewing angle. Ex. 1005, 6:41–47. Petitioner does not provide a sufficient reason why a POSA would consider Kondo’s teaching about ultra-fine inorganic particles for providing colorlessness or a color tone, heat insulation, and ultraviolet ray insulation in a glass-bonding layer, when selecting organic pigments for use in EP ’931’s color-shifting intermediate coating layer. Nor does Petitioner address whether or how applying Kondo’s particle size teaching to EP ’931’s intermediate layer would affect the color-shifting property of that layer. Petitioner also does not explain why a POSA would rely on the particle size of Kondo’s particles in isolation from Kondo’s teaching of inorganic pigments as the ultra-fine particles. See In re Wesslau, 353 F.2d 238, 241 (CCPA 1965) (“It is impermissible within the framework of section 103 to pick and choose from any one reference only so much of it as will support a given position, to the exclusion of other parts necessary to the full appreciation of what such reference fairly suggests to one of ordinary skill in the art.”).” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundDecided for patent owner
“for combining the teachings of EP ’931 and Kondo in a manner that would result in the claimed invention. Petitioner does not show sufficiently that a POSA looking to improve a three-layer coating for automobiles as disclosed in EP ’931 would have looked to Kondo, which teaches laminated glass for windshields. Although Petitioner asserts that “[b]oth EP ’931 and Kondo teach multi-layer systems intended for use in the automobile industry” (Pet. 20), such high-level similarity is not a sufficient obviousness rationale. See Securus Techs., Inc. v. Glob. Tel*Link Corp., 701 F. App’x 971, 977 (Fed. Cir. 2017) (“We agree with the Board that a broad characterization of [asserted references] as both falling within the same alleged field . . . without more, is not enough for [petitioner] to meet its burden of presenting a sufficient rationale to support an obviousness conclusion.”). Petitioner fails to show that Kondo’s interlayer for bonding two glass plates is sufficiently relevant to EP ’931’s intermediate coating layer that a POSA would have applied Kondo’s teachings to the organic pigments in the intermediate coating layer. Kondo teaches a glass-bonding interlayer containing ultra-fine inorganic particles for providing colorlessness or a color tone, heat insulation, and ultraviolet ray insulation, without adversely affecting the bond strength of the interlayer or the haze, radio transmittance, transparency, and durability of the glass laminate. Ex. 1006, 2:25–31, 2:39– 47, 3:2–9. In contrast, EP ’931 teaches an intermediate coating layer containing organic pigments that interact with metallic flake in the base coat to provide a color shift that varies with viewing angle. Ex. 1005, 6:41–47. Petitioner does not provide a sufficient reason why a POSA would consider Kondo’s teaching about ultra-fine inorganic particles for providing colorlessness or a color tone, heat insulation, and ultraviolet ray insulation in a glass-bonding layer, when selecting organic pigments for use in EP ’931’s color-shifting intermediate coating layer. Nor does Petitioner address whether or how applying Kondo’s particle size teaching to EP ’931’s intermediate layer would affect the color-shifting property of that layer. Petitioner also does not explain why a POSA would rely on the particle size” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightDecided for patent owner
“POSA would combine EP ’931 and Kondo and that the proposed combination is based on impermissible hindsight. Id. at 33–39. Patent Owner argues that Grubenmann teaches away from the claimed subject matter and does not support Petitioner’s contentions. Id. at 16, 40–41. Patent Owner argues that JP ’535 does not cure the deficiencies in EP ’931 and Kondo because JP ’535 teaches opaque, hiding layers for concealment of a substrate and teaches away from a transparent layer. Id. at 17–18, 42–44. After considering the parties’ arguments and evidence, we agree with Patent Owner that Petitioner does not make a sufficient showing of obviousness. Our reasoning is two-fold. First, Petitioner’s EP ’931-led grounds are based on a hindsight-biased view of the teachings of Grubenmann and unsupported assertions about the teachings of Kondo and ’JP 535. Second, Petitioner fails to provide a sufficient, non-hindsight biased rationale for combining the three-layer coating of EP ’931 with the teachings of Kondo, Grubenmann, and JP ’535 regarding particle size in a manner that would have led a POSA to the claimed invention. We address each of these shortcomings below.” slip op. at 13
§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,981,505 - Hirsch Glass Corp., D/B/A Spectrum Quartz v. Cambria Company LLCInstitution deniedPTAB · Aug 8, 2022 · IPR2022-00583 · APJ Kristina M Kalan · IPR · Institution
The Board denied institution on all challenged claims because the Petition did not show a reasonable likelihood of prevailing on its obviousness grounds.
In the decision…slab that mimics the veining pattern of natural stone slabs like marble,” one of ordinary skill in the art “would have been motivated to combine the teachings of these references as a part of his or her efforts to continue to develop processed quartz slabs that provide the appearance of natural…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“To institute inter partes review, we must determine that the information presented in the Petition shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons discussed below, after considering the parties’ submissions and the evidence of record, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing with respect to at least one claim of the ’626 patent, and we do not institute inter partes review.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“We agree with Patent Owner that Petitioner’s rationale for combining Benito Lopez and Bigi is insufficient and fails to provide the necessary factual support. In making a determination of obviousness, it is not enough that each claimed limitation be found in one or more prior art references. In re Kotzab, 217 F.3d 1365, 1371 (Fed. Cir. 2000) (explaining that obviousness “cannot be predicated on the mere identification . . . of individual components of claimed limitations”). Instead, Petitioner must also show that the skilled artisan would have had a reason to combine each of the prior art references to achieve the claimed subject matter and a reasonable expectation of success in making the combination. PAR Pharm., Inc. v. TWi Pharm., Inc., 773 F.3d 1186, 1193 (Fed. Cir. 2014). A generic reason to combine references fails to “explain why a person of ordinary skill in the art would have combined elements from specific references in the way the claimed invention does.” ActiveVideo, 694 F.3d at 1328; see also Cardiac Pacemakers, Inc. v. St. Jude Medical, Inc., 381 F.3d 1371, 1377 (2004) (explaining that “[r]ecognition of a need does not render obvious the achievement that meets that need” because “[t]here is an important distinction between the general motivation to cure an uncured disease . . . and the motivation to create a particular cure.”).” slip op. at 18
- BurdenNot shown unpatentable
“According to 35 U.S.C. § 312(a)(3), a petition for inter partes review must identify, “in writing and with particularity, each claim challenged, the grounds on which the challenge to each claim is based, and the evidence that supports the grounds for the challenge to each claim.” According to 37 C.F.R. § 42.104(b)(4), a petition for inter partes review must identify how “the construed claim is unpatentable under the statutory grounds” on which the petitioner challenges the claims, and “must specify where each element of the claim is found in the prior art patents or printed publications relied upon.” Rule 42.104(b)(5) adds that the Petition must identify “specific portions of the evidence that support the challenge.” Similarly, Rule 42.22(a)(2) states that each petition must include “[a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence including material facts, and the governing law, rules, and precedent.” The Patent Trial Practice Guide suggests that “parties should avoid submitting a repository of all the information that a judge could possibly consider, and instead focus on concise, well-organized, easy-to-follow arguments supported by readily identifiable evidence of record.” Patent Trial and Appeal Board Consolidated Trial Practice Guide 39, available at https://www.uspto.gov/TrialPracticeGuideConsolidated (Nov. 14, 2019). Here, Petitioner’s approach of arguing that every limitation in claim 1 can be satisfied by both Benito Lopez and/or Bigi, or possibly the combination of the two, fails to identify with sufficient specificity the portions of Benito Lopez or Bigi or the combination that Petitioner relies on to meet each limitation of claim 1. Although arguing in the alternative is generally permissible, in this case, both the Petition and Mr. Tassone fail to explain in adequate detail which, why or how the identified elements of Benito Lopez or Bigi, or their prospective combination, meet the limitations of claim 1. In each subsection discussing limitations [1.a.]–[1.g.], Petitioner” slip op. at 20
- Expert testimonyPetitioner expert discountedOther
“Petitioner also relies on the testimony of Mr. Tassone, but Mr. Tassone’s testimony similarly falls short. See Ex. 1032 ¶¶ 140–143. Mr. Tassone’s testimony is entitled to little weight because it fails to explain how the alleged market pressures or commercial need would motivate one of ordinary skill in the art to make the proposed combination, and it is not otherwise apparent that it does. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); see also Velander v. Garner, 348 F.3d 1359, 1371 (Fed. Cir. 2003) (“It is within the discretion of the trier of fact to give each item of evidence such weight as it feels appropriate.”); cf. Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value in a validity determination.”).” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,300,626 - Berkeley Lights, Inc. v. The University Of British ColumbiaInstitution deniedPTAB · Jan 21, 2022 · IPR2021-01250 · APJ Christopher L Ogden · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of prevailing on any challenged claim under the asserted obviousness grounds.
In the decision…which can be used to characterize the cells.” Id. (citing Ex. 2008 ¶¶ 26–27). Finally, Patent Owner points to a passage in the ’213 application teaching that the microfluidic device is “highly suitable for adaptation to other applications like recombinant protein production and cell…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“§ 42.4(a), we may only institute an inter partes review when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a); see also 37 C.F.R. § 42.108(c) (2020). Applying that standard, we do not institute an inter partes review, for the reasons explained below.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Relying on Dr. Meinhart’s testimony, Petitioner argues that a person of ordinary skill in the art “would have had a bachelor’s degree in mechanical engineering, chemical engineering, biomedical engineering, molecular biology, (bio)chemistry, or an equivalent degree relevant to microfluidic biological cell analysis, and three to five years of experience with the construction of and application of microfluidic devices to cell culture and analysis.” Pet. 9 (citing Ex. 1002 ¶ 38). Patent Owner does not dispute this proposed level of ordinary skill in its Preliminary Response. See Prelim. Resp. 5–6. Because it is supported by testimonial evidence and appears reasonable at this stage in light of the subject matter of the ’936 patent, we adopt Petitioner’s proposed level of ordinary skill in the art for this decision.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Regardless of whether Patent Owner is correct that the Petition is deficient under § 42.104(b)(3), our decision not to institute does not depend on the construction of “chamber” or whether claim 6 invokes § 112 para. 6. Thus, we do not need to construe either term explicitly for our decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedNot shown unpatentable
“Petitioner has the ultimate burden of persuasion on the question of whether a claim is entitled to the priority date of an earlier application. See Dynamic Drinkware, LLC v. National Graphics, Inc., 800 F.3d 1375, 1379 (Fed. Cir. 2015). “[A] patent application is entitled to the benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” In re Chu, 66 F.3d 292, 297 (Fed. Cir. 1995). In particular, “[t]o be entitled to a parent’s effective filing date, a continuation must comply with the written description requirement of 35 U.S.C. § 112, ¶ 1.” In re Owens, 710 F.3d 1362, 1366 (Fed. Cir. 2013) (citations omitted). The test for the written description requirement “is whether the disclosure of the application relied upon reasonably conveys to those skilled in the art that the inventor had possession of the claimed subject matter as of the filing date.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). A prior application need not contain precisely the same words as are found in the asserted claims. See Eiselstein v. Frank, 52 F.3d 1035, 1038 (Fed. Cir. 1995); Purdue Pharma LP v. Faulding Inc., 230 F.3d 1320, 1323 (Fed. Cir. 2000) (“In order to satisfy the written description requirement, the disclosure as originally filed does not have to provide in haec verba support for the claimed subject matter at issue.”). On the other hand, “[e]ntitlement to a filing date does not extend to subject matter which is not disclosed, but would be obvious over what is expressly disclosed.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1571–72 (Fed. Cir. 1997). A key factor in this written description analysis, which Petitioner did not clearly address in its Petition, is the meaning of “measuring a cell product” in limitation 1D. The ’936 patent discloses that “[t]he measuring the cell product [step] may be selected from one or more of: lineage staining; cell-surface protein staining; antibody staining; enzymatic assay; RT-PCR analysis; PCR analysis; sequencing; functional assay; and bead capture assay to characterize the cells.” Ex. 1001, 6:47–51. This appears to be definitional, such that the meaning of “measuring a cell product secreted by the individual clonal cell populations, or subset thereof,” as in limitation 1D, would include using any one of these listed techniques to analyze cell secretion products. This passage is also consistent with the other claims in the ’936 patent, such as claim 18, which depends from claim 1 and further states that the “measuring the cell product” step “comprises flowing a fluid comprising an immunostaining agent, an enzymatic reagent, a dye or a functionalized bead into the individual chambers.” Id. at 48:29–32; see also id. at 48:33–48 (similar limitations in claims 19–23). As Patent Owner persuasively shows on the present record, the ’213 application discloses many of these analytical techniques, including staining, functional assay, and bead capture. See Prelim. Resp. 15–17. We also find persuasive Dr. Pelanda’s testimony that a person of ordinary skill in the art would have understood that the references in the ’213 application to these analytical techniques relate to analysis of secreted cell products, and that a particular focus of the ’213 application was to use the microfluidic device for analyzing autocrine signaling, which involves detecting or analyzing cell secretions. See Ex. 2008 ¶¶ 22–32. For the above reasons, on the present record, Petitioner has not shown sufficiently that the ’213 application lacks disclosure such that Lecault is prior art to the challenged patent. Accordingly, we determine that Petitioner has not shown that there is a reasonable likelihood that it would prevail on its first and third grounds with respect to any of the challenged claims.” slip op. at 16
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,421,936 - Lenovo (United States) Inc. v. Litl LLCInstitution deniedPTAB · Sep 3, 2021 · IPR2021-00681 · APJ Christopher M Kaiser · IPR · Institution
The Board denied institution because the Petition did not sufficiently identify where the challenged claim limitations were taught or explain the evidence supporting its grounds.
In the decision…begins with a section describing a hypothetical computer that a person of ordinary skill in the art allegedly would have arrived at by combining the teachings of the references asserted in that particular ground. Id. at 37–49, 66–69, 76–87, 92–95, 100–105 (§§ VII.B.1, VII.C.1, VII.D.1, VII.E.1,…
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“to explain Petitioner’s positions fully. Where the Petition provides some explanation, it does so only through a web of internal cross-references that require the reader to engage in extensive analysis just to decipher what is being argued, much less evaluate the merits of that argument. Although it might be possible for us to wade through this voluminous information and separate the teachings of the references, the Ward testimony, Petitioner’s characterizations of the evidence, and Petitioner’s arguments, that is not our role. Instead, Petitioner is required to “specify where each element of the claim is found in the prior art patents or printed publications relied upon” and to both “identify[] specific portions of the evidence that support the challenge” and explain “the relevance of [that] evidence to the challenge raised.” 37 C.F.R. § 42.104(b)(4)–(5); see also id. § 42.22(a)(2) (petitions “must include . . . [a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence”). Petitioner has not complied with our rules. To hold otherwise would require us to “play archaeologist with the record,” which we decline to do. DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999), Based on all these deficiencies, the Petition fails to specify sufficiently where the limitations of the challenged claims of the ’688 patent are taught or suggested by any of the asserted references. It also fails to provide a sufficiently detailed explanation of the significance of the citations to the asserted references and the Ward Declaration. These failures violate the requirements of 35 U.S.C. § 312(a)(3), 37 C.F.R. § 42.22(a)(2), and 37 C.F.R. § 42.104(b)(4)–(5). Because these requirements must be met to show that “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition” under 35 U.S.C. § 314(a), we determine that Petitioner has not made such a showing.” slip op. at 16
NonePatents in suitUS 8,289,688
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.