- Ascend Elements, Inc. v. Duesenfeld GmbHInstitution deniedPTAB · Oct 10, 2025 · PGR2025-00037 · APJ Kevin W Cherry · PGR · Institution
The Board denied institution of PGR on claims 1–14 because Petitioner did not show that any challenged claim was more likely than not unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“information presented in the petition filed under [35 U.S.C. §] 321 . . . demonstrates that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a). For the reasons set forth below, we determine that Petitioner has failed to demonstrate that it is more likely than not that at least one of claims 1–14 of the ’463 patent is unpatentable. Accordingly, we deny institution of a postgrant review of claims 1–14 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that one of ordinary skill in the art “would have had at least a Bachelor’s degree in electrical engineering, material science, chemical engineering, or an equivalent field, as well as at least 2 to 3 years of academic or industry experience in the recycling or processing of lithiumion batteries. Additional formal education focusing on processing of lithium batteries may substitute for practical experience and additional practical experience can substitute for less education.” Pet. 10–11. Patent Owner does not contest this definition of a person of skill in the art. See Prelim. Resp. 11. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as, on the present record, it appears consistent with the ’463 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner
“distinct from “comminute[ion],” Petitioner offers only the testimony of its expert, Mr. Juzkow, who equates Tomioka’s “cutting” with “comminute[ion].” See Ex. 1003 ¶ 121. However, Mr. Juzkow provides insufficient reasoning to support his conclusion, particularly given the intrinsic and extrinsic evidence discussed above. In contrast, Patent Owner’s expert, Mr. Dantam, provides extensive reasoning, supported by citations to other evidence, to support his conclusion that Tomioka’s “dismantling” is not the claimed “comminution.” Thus, we give more weight to Mr. Dantam’s testimony than Mr. Juzkow’s testimony. Weighing this evidence all together, we find that Petitioner has failed to show that it is more likely than not that Tomioka’s teaches the claimed comminution under Petitioner’s first theory.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundTeaching away not foundNot shown unpatentable
“obvious. Pet. 34–35. However, we agree with Patent Owner that Petitioner has also failed to show that it is more likely than not that Tomioka renders this limitation obvious. See Prelim. Resp. 28–31. To begin with, Petitioner’s contentions lack sufficient reasoning explaining why a person of ordinary skill would have modified Tomioka in the manner proposed. “[R]ejections on obviousness grounds cannot be sustained by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006). Petitioner merely asserts that a person of ordinary skill in the art could use the roller system in place of the dismantling disclosed for the embodiments in Figures 19 and 20. On this record, we find this bare contention insufficient. actual disclosure of Tomioka. The rollers in Tomioka are used to separate the “battery body” from the “resin package enclosing the battery body,” and Tomioka specifically discloses that this technique is designed to “avoid damaging the battery body.” Ex. 1005 ¶¶ 25, 26, 29; Ex. 2011 ¶¶ 72–73. Thus, there is a significant difference between what Tomioka teaches and what Petitioner proposes to use the roller system to do. In addition, as Patent Owner points out, Tomioka specifically discloses there are risks associated with mechanically crushing battery packs, such as “risk of sparking due to residual voltage if the battery units are damaged in the process.” Ex. 1005 ¶ 5. Although we do not agree with Patent Owner that this amounts to a “teaching away,” see In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994), we do believe that this teaching suggests a trade off that should be weighed in determining whether to make the modification, see Medichem S.A. v. Rolabo S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). However, Petitioner has failed to account adequately, if at all, for this trade off. Thus, we find that Petitioner has failed to show that it is more likely than not that Tomioka accounts for the claimed “comminuting.”” slip op. at 15
§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 12,119,463 - Shenzhen Tuozhu Technology Co. Ltd. v. Stratasys, Inc.Institution deniedPTAB · Oct 6, 2025 · IPR2025-00585 · APJ Lilan Ren · IPR · Institution
The Board denied institution on claims 1–6, 10–19 because claim 1’s scope is ambiguous and the petition did not show a reasonable likelihood of prevailing on any asserted obviousness ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. See 35 U.S.C. § 314 (2024); 37 C.F.R. § 42.4(a) (2024). Institution of an inter partes review requires that “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons set forth below, we determine that the scope of claim 1 is ambiguous and that there is not a reasonable likelihood that Petitioner will prevail with respect to at least one challenged claim, and we deny inter partes review.1” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“distinguishes and contrasts build material property from operational parameters. The diagnostic test passage therefore only describes a diagnostic test of the build material property but does not describe a subsequent diagnostic test to assess whether an operational parameter is suitable for the printer. Based solely on the diagnostic test passage and the prosecution history, a possible interpretation may be that the operational parameter determination in claim element 1b encompasses the diagnostic testing in claim element 1c. That is, “performing a diagnostic test to determine whether the operational parameter is suitable for the three-dimensional printer” in claim element 1c is subsumed as part of “determining an operational parameter of a fabrication process using the three-dimensional printer based upon the data, the operational parameter including at least one of a build platform temperature, a build volume temperature, an infill requirement, a rafting requirement, a support structure requirement, and a cooling requirement” in claim element 1b.” slip op. at 15
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateOther
“benefit of the filing date of an earlier filed application only if the disclosure of the earlier application provides support for the claims of the later application, as required by 35 U.S.C. § 112.” PowerOasis, Inc. v. T-Mobile USA, Inc., 522 F.3d 1299, 1306 (Fed. Cir. 2008); see also Research Corps. Techs. v. Microsoft Corp., 627 F.3d 859, 871–72 (Fed. Cir. 2010) (holding that claims of the later-filed application, which were not limited to a “blue noise mask,” were “not entitled to claim the benefit of their parent applications’ filing dates”); ICU Med., Inc. v. Alaris Med. Sys., 558 F.3d 1368, 1377–78 (Fed. Cir. 2009) (holding that “spikeless” claims “added years later during prosecution” were not supported by the specification which “describe[d] only medical valves with spikes”); Tronzo v. Biomet, Inc., 156 F.3d 1154, 1158–60 (Fed. Cir. 1998) (holding the generic shaped cup claims of the later-filed child application were not entitled to the filing date of the parent application that “disclosed only a trapezoidal cup and nothing more”). “To satisfy the written description requirement the disclosure of the prior application must convey with reasonable clarity to those skilled in the art that, as of the filing date sought, [the inventor] was in possession of the invention.” PowerOasis, 522 F.3d at 1306 (emphasis omitted; alteration in original). The sufficiency of written description support is based on “an objective inquiry into the four corners of the specification from the perspective of a person of ordinary skill in the art.” Ariad Pharm., Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc).” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art in the field in the relevant time frame would have had “(1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶ 20). Petitioner also contends that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. (citing the same). Patent Owner contends that an ordinarily skilled artisan “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 12. For purposes of this decision, we adopt Petitioner’s definition of the level of ordinary skill in the art as it appears unopposed and consistent with the disclosures of the ’464 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9
Claim construction§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 11,167,464 - Lifevac, LLC v. Dcstar Inc.Institution deniedPTAB · Sep 8, 2025 · IPR2025-00454 · APJ Cynthia M Hardman · IPR · Institution
The Board denied institution on claims 1–17 because Petitioner did not show a reasonable likelihood that Zhongnan qualifies as prior art under the § 102(b)(1)(B) exception.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). Petitioner ultimately bears the burden of persuasion to prove unpatentability of each challenged claim by a preponderance of the evidence. 35 U.S.C. § 316(e). This burden never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). The Board may authorize inter partes review if we determine that the information presented in the Petition and Patent Owner’s Preliminary Response shows a reasonable likelihood that Petitioner will prevail with respect to at least one of the claims challenged in the petition. 35 U.S.C. § 314(a).” slip op. at 8
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artDecided for patent owner
“provides that a disclosure which would otherwise qualify as prior art under AIA 35 U.S.C. 102(a)(1) (patent, printed publication, public use, sale, or other means of public availability) is excepted as prior art if: (1) the disclosure was made one year or less before the effective filing date of the claimed invention; and (2) the subject matter disclosed had been previously publicly disclosed by the inventor, a joint inventor, or another who obtained the subject matter directly or indirectly from the inventor or joint inventor. MPEP § 2153.02 (9th ed. rev. 01.2024 Nov. 2024); see also Sanho, 108 F.4th at 1381. As to point (1), there is no dispute that Zhongnan was published one year or less before the effective filing date of the challenged claims. See, e.g., Ex. 1005, code (43); Pet. 11, 20; Prelim. Resp. 9–10. Thus, we focus on point (2), which requires that IDEAR be previously publicly disclosed by the inventor, and that Zhongnan and IDEAR disclose the same subject matter.” slip op. at 10
- BurdenDecided for patent owner
“Our rules require that in determining whether to institute inter partes review, we “take into account a patent owner preliminary response where such a response is filed, including any testimonial evidence.” 37 C.F.R. § 42.108(c) (emphasis added); Prelim. Sur-reply 3. As Patent Owner correctly notes, “the Board routinely weighs declaratory testimony at the institution[] stage and virtually always makes institution decisions without the benefit of cross-examination.” Prelim. Resp. 19–20 (emphasis omitted) (citing LG Elecs. Inc. v. Wi-LAN Inc., IPR2018-00704, Paper 14 at 13–14 (PTAB 2018); Freebit AS v. Bose Corp., IPR2017-01308, Paper 8 at 28 (PTAB 2017)). For example, in LG Electronics and Freebit, the Board denied institution, finding that the patent owner had provided sufficient evidence to antedate the petitioners’ proffered prior art references. See LG Elecs., IPR2018-00704, Paper 14 at 7; Freebit, IPR2017-01308, Paper 8 at 25, 34.10” slip op. at 23
§ 102 anticipationPatents in suitUS 11,478,575 - Cambridge Industries USA, Inc. v. Applied Optoelectronics, Inc.Institution deniedPTAB · Aug 26, 2025 · IPR2025-00436 · APJ Mitchell G Weatherly · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that Mizobuchi or Akashi anticipates any of claims 1–17.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one challenged claim.” slip op. at 2
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“All independent claims recite “a light engine driving circuit disposed on the substrate.” Ex. 1001, 9:59 (claim 1), 10:64 (claim 12), 12:7 (claim 15). Petitioner contends that “Mizobuchi discloses a light engine driving circuit disposed on the substrate that includes a clock data recovery (“CDR”) circuit and a power supply circuit.” See Pet. 19 (citing Ex. 1006, 3:57–4:18, 12:27–41, Figs. 2, 3A; Ex. 1003 ¶ 76 while addressing limitation 1d); see also id. at 26–28 (addressing claims 12 and 15 by cross-referencing showing for claim 1). Petitioner identifies the driving circuit on Mizobuchi’s “first circuit board” 2 in the annotated version of Mizobuchi’s Figure 2, reproduced below. See Pet. 19.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner contends that the Board may find it necessary to interpret “feedthrough device,” “interconnect device,” and “opposing arrangement.” Pet. 8–11. Patent Owner responds to Petitioner’s proposed interpretations of these terms, but contends that the Board need not interpret them to determine whether to institute review. Prelim. Resp. 17–18. For reasons that become apparent below, we agree with Patent Owner and do not expressly construe these terms. B. Legal Standards” slip op. at 4
Claim construction§ 102 anticipationcites PhillipsPatents in suitUS 10,313,024 - Therabody, Inc. v. Datafeel Inc.Institution deniedPTAB · Aug 21, 2025 · PGR2025-00026 · APJ Lisa L Tsang · PGR · Institution
The Board denied institution because Petitioner did not show claim 4 more likely than not unpatentable on either obviousness or § 112 ground.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 324(a), a post-grant review may be instituted only if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). Upon considering the arguments and evidence, we conclude that the information presented shows it is not more likely than not that at least one challenged claim of the ’174 patent is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we adopt the level of ordinary skill in the art articulated by Petitioner because, based on the current record, it is consistent with our review and understanding of the technology and descriptions in the ’174 patent and prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note, however, that our analysis below would be the same regardless of whether we adopt Petitioner’s or Patent Owner’s proffered level of skill in the art.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner and Patent Owner agree that no claim terms need construction. Pet. 14; Prelim. Resp. 6. After reviewing the evidence and arguments presented by the parties, we determine that it is not necessary to expressly construe any claim terms because doing so would not change the outcome of our analysis below. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not reached
“of Choi to support its argument that an ordinarily skilled artisan would have understood Choi’s infrared lamp housing to define a concave shape as claimed. See Pet. 61–62. With only this explanation and evidence from Petitioner and Dr. Jenson, however, we cannot not discern how these portions of Choi would have so apprised an ordinarily skilled artisan. For example, the side view of the infrared lamp housing, illustrated in Figure 5 reproduced below, shows the housing having a convex, rather than concave, shape. See Ex. 1008, Fig. 5. Furthermore, paragraphs 20 and 48 refer to the housing’s “circular” shape and outer periphery and also “tubular” shape. See id. ¶¶ 20, 48. But these descriptions, either alone or together with Figure 5, also do not support adequately a finding that Choi’s housing is concave. Choi’s teachings in paragraphs 20 and 46 regarding the lamp housing guiding or directing infrared light from the lamp to irradiate the skin of a user, without more, are similarly deficient. See id. ¶¶ 20, 46. And although Dr. Jensen appears to equate “concave” with “inner circular,” he does not provide the basis for his testimony or explain what “inner circular” means, particularly in the context of distinguishing a convex shape from a concave shape. See Ex. 1002 ¶ 197. Accordingly, we determine there is insufficient evidence to support Petitioner’s conclusory statements that an ordinarily skilled artisan would have understood Choi’s infrared lamp housing to define a concave shape as claimed.” slip op. at 23
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · GrahamPatents in suitUS 12,036,174 - Zhuhai Cosmx Battery Co., Ltd. v. Ninge Amperex Technology LimitedInstitution deniedPTAB · Aug 20, 2025 · IPR2025-00385 · APJ Debra L Dennett · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were anticipated by Nishikawa or obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review under 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless the Director determines . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least [one] of the claims challenged in the petition.” For the reasons set forth below, upon considering the Petition and Preliminary Response, we determine that Petitioner has not established a reasonable likelihood of prevailing with respect to at least one challenged claim. Accordingly, we deny the Petition and decline to institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that A person of ordinary skill in the relevant art would typically hold an advanced degree in chemistry, material science, and/or a related discipline, and have at least two years of experience with designing and/or fabricating battery separators or have an equivalent level of education, training, and experience. Pet. 5. Patent Owner “adopts the definition proposed by Petitioner” for the purposes of the Preliminary Response. Prelim. Resp. 22. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s unopposed definition because it is consistent with the specification. We note that neither party indicated that the result would change under any different definition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Absolute plastic deformation rate” and “relative plastic deformation rate” are the only claim terms disputed in this proceeding, and are clearly defined in the Specification and in claim 1. See Spec. 4:22–27, 4:47–54; 25:31–37. Because we determine that claim construction is not necessary to decide whether to institute, we do not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review). slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Petitioner’s arguments are unconvincing. Petitioner points to nothing in Nishikawa that allows a POSITA to determine L2 (defined as “a length of 4 Tensile strength is measured as force per units area, such as MPa or psi. One MPa equals one N/mm2. Nishikawa Table 1 discloses tensile strength in N/cm. Ex. 1004 Table 1. Petitioner makes calculations to convert the reported N/cm into N/m2 and then to GPa, but provides no explanation for why tensile strength is reported in N/cm or how it was measured. See Pet. 31. the porous substrate after the porous substrate is stretched to breakage and docked along the fracture caused by the breakage and flattened”) or L2 – L0. See generally Pet., Ex. 1004. Petitioner and its expert, Dr. Pecht, fail to adequately explain why tensile strength divided by Young’s modulus is “a proxy for L1 – L2” or why such a proxy is sufficient to disclose the limitation as stated. Instead, we are required to rely on “approximations” and “estimates” with insufficient explanation of why such they are appropriate or adequate. See Pet. 26, 30, 32; see also Ex. 1003 ¶¶ 97, 105–108, 111.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,964,927 - Cambridge Industries USA, Inc. v. Applied Optoelectronics, Inc.Institution deniedPTAB · Jul 29, 2025 · IPR2025-00434 · APJ Monica S Ullagaddi · IPR · Institution
Institution was denied for claims 1–7 because the Petition did not show a reasonable likelihood that either Shen or Soldano anticipates any challenged claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“The standard for institution is set forth in 35 U.S.C. § 314, which provides that an inter partes review may not be instituted unless the information presented in the Petition and the Preliminary Response shows that “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2019); see also 37 C.F.R § 42.4(a) (2019) (“The Board institutes the trial on behalf of the Director.”). Upon consideration of the parties’ contentions and the evidence of record, we conclude that Petitioner has not established a reasonable likelihood of prevailing in demonstrating the unpatentability of at least one challenged claim of the ’301 patent. Accordingly, we deny Petitioner’s request and do not institute an inter partes review.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We interpret a claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under this standard, we construe the claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3)). “A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros., Inc. v. Union Oil Co. of California, 814 F.2d 628, 631 (Fed. Cir. 1987). We analyze” slip op. at 7
Claim construction§ 102 anticipationPatents in suitUS 10,379,301 - PTAB · Jul 25, 2025 · IPR2025-00237 · APJ Annette R Reimers · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 2, 5, 6, 11, 12, 17, 21, 23, 27, 28, or 30 were unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition and the evidence of record, we determine that Petitioner has not demonstrated a reasonable likelihood of success in proving that at least 1 claim of the ’879 patent is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedOther
“Patent Owner does not contest the level of ordinary skill in the art set forth in the Petition. Prelim. Resp. 19. Because Petitioner’s unopposed definition is consistent with the ’879 patent and the prior art of record, we adopt that definition. See Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579–80 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“In particular, we agree with Patent Owner that Cantor does not teach or suggest contacting a ‘tissue section’ with its beads, let alone that its beads could be contacted with a tissue section to identify spatial location. Prelim. Resp. 36–48. In this case, we are persuaded by the testimony of Dr. Cantor, sole inventor of Cantor (Ex. 2002 ¶ 29), that Cantor’s nucleic acid samples are made in bulk from the extraction of nucleic acids from a biological sample and mixed together “to create the sample nucleic acid prior to mixing that with the solid phase nucleic acids to capture molecule(s) from the sample nucleic acid.” Id. at ¶ 36 (citing EX.1031 1:5–6). More specifically, according to Dr. Cantor, “[f]or bulk-analysis methods, nucleic acids are extracted from the different types of cells within a tissue sample without preserving their spatial distribution.” Id. at ¶ 19. Dr. Cantor further explains that in bulk-analysis methods, the mixture is analyzed to determine if a particular nucleic acid was present in the tissue sample or not. They cannot, however, determine where the molecule was in the tissue sample. As such, bulk-analysis techniques provide no information about spatial location of biological molecules in tissue samples. This is in contrast to spatial analysis methods such as those claimed in the ’879 patent which can determine both if a biological molecule was present in a tissue sample and where the molecule was in the tissue sample. Id. at ¶¶ 16–17. Although we recognize that Cantor discloses “providing the beads according to an (X,Y) array” (Pet. 24, 30–31 (citing to Dr. Puglisi, Ex. 1102 ¶¶ 133, 155, respectively), this disclosure makes no mention of using this array to map where the nucleic acids of Cantor came from relative to the original sample, let alone when that original sample is a tissue. See e.g. Ex. 1031, 17. The only mention of “tissue” made in Cantor is in reference to where the sample may be obtained, for example, “[t]he biological sample can be in any form, including without limitation a solid material such as a tissue.” Id. at 6. Cantor provides no teaching, however, regarding how to use a tissue sample with the probes and methods described in Cantor to identify where the target nucleic acids of Cantor were spatially located within the tissue section itself. See Ex. 2002 ¶¶ 142, 143 (Dr. Cantor testifying that (1) “a POSA would only be able to determine where on the array a target nucleic acid was captured, but not where in the original tissue section the nucleic acid came from,” because “all information about the spatial location of a target nucleic acid in a tissue sample is lost when the nucleic acid sample is prepared as Cantor teaches”; and (2) “Cantor [] does not teach or suggest contacting its solid supports (e.g. beads) with a tissue section and certainly not with its beads at known locations to obtain spatial information.”).” slip op. at 23
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner
“3. Discussion Petitioner challenges whether certain elements of independent claim 1 are supported by the’124 provisional and/or whether the ’879 patent’s priority chain is intact. Pet. 57–66. Having considered the parties’ positions and evidence of record, however, we agree with Patent Owner’s written description analysis, summarized above, and find that (1) the’124 provisional provides adequate written description support for each of the challenged claim elements; (2) the ’879 patent’s priority chain is intact; and (3) the ’879 patent is therefore entitled to the priority date of April 5, 2010. Consequently, Frisen is not prior art to the challenged claims. Because Frisen is not prior art, we do not specifically comment on its teachings, nor the factual assertions regarding its teachings provided by Petitioner or Patent Owner. 4. Conclusion For the foregoing reasons, we determine that Petitioner has not established a reasonable likelihood of showing that Frisen anticipates any of claims 1, 2, 5, 6, 11, 12, 17, 21, 23, 27, 28, and 30.” slip op. at 32
§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,001,879 - PTAB · Jul 25, 2025 · IPR2025-00236 · APJ Annette R Reimers · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 2, 6, 7, 12, 13, 18, 20, 21, 23, 25, 26, or 30 were unpatentable.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“review. 35 U.S.C. § 314(b) (2018); 37 C.F.R. § 42.4(a) (2024). An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Upon consideration of the Petition and the evidence of record, we determine that Petitioner has not demonstrated a reasonable likelihood of success in proving that at least 1 claim of the ’468 patent is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had a doctorate degree (or equivalent) in bioengineering, genetics, genomics, chemistry, biochemistry, biophysics, molecular imaging or a related discipline with at least 2-4 years of academic, research, or industry experience in genomic technology. In the course of their training and experience, the POSA would have acquired a working knowledge of nucleic acid arrays, combinatorial chemistry techniques for making and using such arrays, nucleic acid sequencing and sample preparation techniques, such as barcoding, imaging methods for signal detection, as well as histopathology techniques for cell permeabilization and tissue handling. Pet. 13–14 (citing Ex. 1102 ¶¶ 30–32). Patent Owner does not contest the level of ordinary skill in the art set forth in the Petition. Prelim. Resp. 19. Because Petitioner’s unopposed definition is consistent with the ’468 patent and the prior art of record, we adopt that definition. See Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579–80 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 10
- Expert testimonyPatent owner expert creditedDecided for patent owner
“In particular, we agree with Patent Owner that Cantor does not teach or suggest contacting a ‘tissue section’ with its beads, let alone that its beads could be contacted with a tissue section to identify spatial location. Prelim. Resp. 37–44. In this case, we are persuaded by the testimony of Dr. Cantor, sole inventor of Cantor (Ex. 2002 ¶ 29), that Cantor’s nucleic acid samples are made in bulk from the extraction of nucleic acids from a biological sample and mixed together “to create the sample nucleic acid prior to mixing that with the solid phase nucleic acids to capture molecule(s) from the sample nucleic acid.” Id. at ¶ 36 (citing EX.1031 1:5–6). More specifically, according to Dr. Cantor, “[f]or bulk-analysis methods, nucleic acids are extracted from the different types of cells within a tissue sample without preserving their spatial distribution.” Id. at ¶ 19. Dr. Cantor further explains that in bulk-analysis methods, the mixture is analyzed to determine if a particular nucleic acid was present in the tissue sample or not. They cannot, however, determine where the molecule was in the tissue sample. As such, bulk-analysis techniques provide no information about spatial location of biological molecules in tissue samples. This is in contrast to spatial analysis methods such as those claimed in the ’468 patent which can determine both if a biological molecule was present in a tissue sample and where the molecule was in the tissue sample. Id. at ¶¶ 16–17. Although we recognize that Cantor discloses “providing the beads according to an (X,Y) array” (Pet. 25–26, 32–33 (citing to Dr. Puglisi, Ex. 1102 ¶¶ 133, 135, respectively), this disclosure makes no mention of using this array to map where the nucleic acids of Cantor came from relative to the original sample, let alone when that original sample is a tissue. See e.g. Ex. 1031, 17. The only mention of “tissue” made in Cantor is in reference to where the sample may be obtained, for example, “[t]he biological sample can be in any form, including without limitation a solid material such as a tissue.” Id. at 6. Cantor provides no teaching, however, regarding how to use a tissue sample with the probes and methods described in Cantor to identify where the target nucleic acids of Cantor were spatially located within the tissue section itself. See Ex. 2002 ¶¶ 142, 143 (Dr. Cantor testifying that (1) “a POSA would only be able to determine where on the array a target nucleic acid was captured, but not where in the original tissue section the nucleic acid came from,” because “all information about the spatial location of a target nucleic acid in a tissue sample is lost when the nucleic acid sample is prepared as Cantor teaches”; and (2) “Cantor [] does not teach or suggest contacting its solid supports (e.g. beads) with a tissue section and certainly not with its beads at known locations to obtain spatial information.”).” slip op. at 23
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentable
“In particular, we agree with Patent Owner that Cantor does not teach or suggest contacting a ‘tissue section’ with its beads, let alone that its beads could be contacted with a tissue section to identify spatial location. Prelim. Resp. 37–44. In this case, we are persuaded by the testimony of Dr. Cantor, sole inventor of Cantor (Ex. 2002 ¶ 29), that Cantor’s nucleic acid samples are made in bulk from the extraction of nucleic acids from a biological sample and mixed together “to create the sample nucleic acid prior to mixing that with the solid phase nucleic acids to capture molecule(s) from the sample nucleic acid.” Id. at ¶ 36 (citing EX.1031 1:5–6). More specifically, according to Dr. Cantor, “[f]or bulk-analysis methods, nucleic acids are extracted from the different types of cells within a tissue sample without preserving their spatial distribution.” Id. at ¶ 19. Dr. Cantor further explains that in bulk-analysis methods, the mixture is analyzed to determine if a particular nucleic acid was present in the tissue sample or not. They cannot, however, determine where the molecule was in the tissue sample. As such, bulk-analysis techniques provide no information about spatial location of biological molecules in tissue samples. This is in contrast to spatial analysis methods such as those claimed in the ’468 patent which can determine both if a biological molecule was present in a tissue sample and where the molecule was in the tissue sample. Id. at ¶¶ 16–17. Although we recognize that Cantor discloses “providing the beads according to an (X,Y) array” (Pet. 25–26, 32–33 (citing to Dr. Puglisi, Ex. 1102 ¶¶ 133, 135, respectively), this disclosure makes no mention of using this array to map where the nucleic acids of Cantor came from relative to the original sample, let alone when that original sample is a tissue. See e.g. Ex. 1031, 17. The only mention of “tissue” made in Cantor is in reference to where the sample may be obtained, for example, “[t]he biological sample can be in any form, including without limitation a solid material such as a tissue.” Id. at 6. Cantor provides no teaching, however, regarding how to use a tissue sample with the probes and methods described in Cantor to identify where the target nucleic acids of Cantor were spatially located within the tissue section itself. See Ex. 2002 ¶¶ 142, 143 (Dr. Cantor testifying that (1) “a POSA would only be able to determine where on the array a target nucleic acid was captured, but not where in the original tissue section the nucleic acid came from,” because “all information about the spatial location of a target nucleic acid in a tissue sample is lost when the nucleic acid sample is prepared as Cantor teaches”; and (2) “Cantor [] does not teach or suggest contacting its solid supports (e.g. beads) with a tissue section and certainly not with its beads at known locations to obtain spatial information.”).” slip op. at 23
§ 102 anticipation§ 103 obviousnessPatents in suitUS 10,662,468 - Skechers U.S.A., Inc. v. Nike, Inc.Institution deniedPTAB · Jun 9, 2025 · IPR2025-00151 · APJ Ken B Barrett · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving any of claims 1–27 unpatentable on the asserted anticipation and obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“An inter partes review may not be instituted “unless . . . the information presented in the petition . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Having considered the arguments and evidence presented by Petitioner and Patent Owner, we determine that Petitioner has not demonstrated a reasonable likelihood of prevailing on at least one of the challenged claims of the ’636 patent. Accordingly, we do not institute an inter partes review of the challenged claims.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“25:5 (limitation 1a1: “a portion of the knitted component defining the upper”). “Where a claim lists elements separately, ‘the clear implication of the claim language’ is that those elements are ‘distinct component[s]’ of the patented invention.” Becton, Dickinson & Co. v. Tyco Healthcare Grp., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004)) (alteration in original). Thus, the claim language suggests that the “integral knit tongue” is a component distinct, at least to some degree, from the “upper.” See also Ex. 1001, 2:27–28 (the Specification stating that “[a] knitted component including the upper and an integral knit tongue is incorporated into the article of footwear.”). Limitation 1d reinforces this understanding by requiring the tongue to be joined to a portion of the throat area of the upper. See id. at 6:35–38 (the Specification indicating that the “throat area” is an area of the upper); cf. Ex. 2014, 18–19 (defining “Throat”: “The main opening of a shoe extending from the vamp [(the front part of a shoe upper that covers the toes and part of the foot)] to the ankle.”). In addition to suggesting that the tongue is a component distinct from the upper, the claim language indicates that the integral knit tongue extends through a throat area. See Ex. 1001, 25:10–11 (limitation 1b: “an integral knit tongue . . . extending through a throat area of the knitted component”). With that context, we turn to the parties’ arguments.” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentable
“claim language does not specify it, both parties contend that the “portion of the knitted component” constitutes the majority of the upper. See Pet. 25– 26, 30 (Petitioner applying in this ground that which it characterizes as Patent Owner’s claim construction position); Prelim. Resp. 43 (Patent Owner noting that the Specification states that “a majority of upper 120 is formed from a knitted component 130,” and contending that limitation 1a1 means that “a majority of the upper must be knitted.” (quoting Ex. 1001, 6:57–59)). Nevertheless, we determine for the following reasons that Petitioner has not shown sufficiently that central textile element 60 of Dua-956 defines an upper within the meaning of the claims. See Pet. 26. Petitioner contends that, “[w]ith respect to what defines the upper, the ’636 patent discloses that the ‘upper generally extends over the instep and toe areas of the foot, along the medial and lateral sides of the foot, under the foot, and around the heel area of the foot.’” Pet. 27 (citing Ex. 1001, 1:44–46, 6:66–67). Petitioner reasons that, “[a]s such, the ’636 patent describes the upper as extending around six parts of the foot: (1) the instep area, (2) the toe area, (3) the medial side, (4) the lateral side, (5) under the foot, and (6) the heel area.” Id. Applying this reasoning to the reference, Petitioner contends that, “[o]f the six upper parts identified in the ’636 patent, only two of them—the medial and lateral sides—are not formed by the central textile element 60,” and therefor “the majority of the parts of the upper are formed by the central element 60.” Id. at 30 (citing Ex. 1002 ¶¶ 103–109). Petitioner provides an annotated versions of Figures 8B and 8C of Dua-956, reproduced below, to depict its contentions. Id. at 30. Above are Figures 8B and 8C of Dua-956—which are, respectively, perspective views depicting a second step and a third step in assembling the article of footwear (Ex. 1029, 3:41–45)—with central textile element 60 shaded green. As Petitioner concedes (Pet. 30) and as the annotated figures above show, central textile element 60 does not form the medial and lateral sides of the footwear. Thus, even if central textile element 60 constitutes the majority of parts of the upper, the sides of the upper remain undefined by the central textile element. Petitioner does not explain adequately how the upper is defined when the side components are missing. We determine that Petitioner has not demonstrated adequately for institution that Dua-956 discloses “a portion of the knitted component defining the upper,” as recited in independent claim 1.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentable
“Petitioner contends that “both upper 70 and 30' are constructed as a single, unitary knit element that defines the upper, and it would have been obvious to construct upper 30 in the same manner.” Pet. 65. Petitioner next turns to Horii, asserting that “Horii discloses “shoes 1 that are characterized by the fact that the entire upper is constructed of a single piece of upper member 2 that is made through weft knitting or circular knitting.’” Id. at 67 (citing Ex. 1017, 9) (emphasis omitted). Petitioner reasons that “[a] POSITA would have been motivated to manufacture Dua-956’s upper 30, for example, using the multilayer, single fabric of Horii because Horii’s single-piece knit upper would have provided upper 30 with a seamless structure.” Id. at 68. We disagree with Petitioner’s assertion that “[c]onstructing Dua-956’s upper 30 as a single, unitary knit component would not materially change the analysis under Ground 1A.” Pet. 70. In Ground 1A, Petitioner contends that “‘forward portion 61’ of the central textile element 60 is an integral knit tongue that extends through a throat area of the knitted component in the assembled upper 30.” Id. at 34. During the assembly of footwear 10, forward portion 61 is flipped over the top of the footwear and the separate textile elements 40 and 50 (the sides of the footwear) are stitched to the lateral and medial edges (64a and 64b) of forward portion 61—the purported tongue. See Ex. 1029, 9:5–11, Figs. 8B, 8C. Petitioner does not explain adequately how, when modifying the embodiment used in Ground 1A to have a seamless top portion, the purported integral knit tongue is retained in that combination. See Pet. 70 (Petitioner asserting that the proposed combination would still have an exterior surface, an inner surface, lace elements 33, channels 44/54, and loops 35, “along with the other structures identified under Ground 1A,” but not specifically discussing the purported integral knit tongue.). We determine that Petitioner has not demonstrated a reasonable likelihood of demonstrating that claims 1–6, 8–17, and 19–27 would have been obvious over Dua-596 alone or in combination with Horii.” slip op. at 24
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,510,636
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.